-
Match the complete marking
Provide the complete Delta Electronics PFB1224UHE marking. Verify the exact two-wire fan marking and lead polarity.
-
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered PFB1224UHE with the installed equipment and applicable Delta Electronics instructions.
Technical specifications for PFB1224UHE
-
Manufacturer:Delta Electronics
-
Product Category:General Automation
-
Spare Part Number:PFB1224UHE
-
Weight:0.38 kg
-
Tariff Code:8537101190
-
Rated supply:24 V DC
-
Operating supply:14.0–26.5 V DC
-
Input current:2.00 A nominal; 2.40 A maximum
-
Input power:48.0 W nominal; 57.6 W maximum
-
Reference speed:5,500 rpm
-
Free-air flow:252.85 CFM at zero static pressure
-
Shutoff pressure:35.877 mm H₂O at zero airflow
-
Acoustic noise:66.5 dB(A) average; 70.5 dB(A) maximum
-
Power leads:Red positive; black negative
-
Motor type:Brushless DC, two phases/eight poles
-
Insulation class:UL Class A
Information
- Delta Electronics PFB1224UHE develops airflow against equipment resistance, so the installed operating point depends on the enclosure, filters and flow path as well as the fan itself.
Airflow: 252.85 CFM at zero static pressure
Wiring: Two power leads
Reference speed is 5,500 rpm. The maximum free-air flow is 252.85 CFM at zero static pressure; the maximum pressure is 35.877 mm H2O at zero airflow. An installed system normally operates between these two endpoints.
The two-wire connection uses red for positive supply and black for negative. The motor has locked-rotor protection, but protection operation does not make a mechanically obstructed fan an acceptable cooling source. The rotating assembly requires suitable guarding and a clear air path.
PFB1224UHE Official Technical Excerpt
Delta Electronics PFB1224UHE: original manufacturer technical information covering the specified interfaces and operating limits. PDF · 5 pages.PFB1224UHE Installation & Verification Guide
Apter Power installation and verification guide covering identify the two-wire configuration, set the airflow direction, connect the power leads, observe startup and rotation, inspect abnormal noise. PDF · 5 pages.
Application scope: The applications below describe its technical role. Select associated hardware and configuration for the actual installation.
Enclosure forced-air cooling
Move air through an engineered inlet, outlet and filter arrangement.High-flow air exchange
Use the fan curve to assess an operating point rather than selecting by free-air flow alone.24 V equipment ventilation
Integrate the fan with a supply sized for its current and startup behavior.Cooling maintenance
Compare temperature and filter condition with a retained operating baseline.
Check the 24 V supply and wiring against the 2.40 A maximum operating current. Include the installation's startup and protection requirements in the power-system assessment.
Remove cable intrusion and other obstructions from the rotating area. Fit the required guard and mechanical support without blocking the intended airflow path.
Review filters, grilles, ducts and nearby obstructions. Do not use the free-air flow figure as the delivered airflow of a high-resistance installation.
Check the equipment temperature under representative load and airflow conditions. Fan rotation alone does not establish that the cooling requirement has been met.
Record supply voltage, current, airflow direction, filter condition and equipment temperature. Use that baseline to distinguish a fan problem from increasing enclosure resistance.
Investigate rubbing, looseness or changed vibration before accepting acoustic behavior. Compare sound measurements only under defined, repeatable operating conditions.
Alternative Names
Technical notes
Operating boundary: The airflow and pressure endpoints describe different test conditions. Neither endpoint alone proves the cooling performance of a completed machine.
Integration details: Match the two-wire electrical version, supply rating, airflow direction and mounting arrangement; a similar fan body is not sufficient evidence of equivalence.
Technical basis: Delta Electronics PFB1224UHE Specification for Approval, sample revision 00. Values apply to the two-wire PFB1224UHE specification. Free-air flow and shutoff pressure are separate endpoints, not simultaneous operating values.
FAQ View All FAQ
-
Can PFB1224UHE deliver its maximum airflow at maximum static pressure?No. Maximum airflow is measured at zero static pressure, while maximum pressure occurs at zero airflow. The installed operating point lies on the fan/system curve intersection.
-
What current allowance is needed for PFB1224UHE?The specification gives 2.00 A nominal and 2.40 A maximum input current. Size the supply and wiring for the actual operating and startup conditions.
-
Does the two-wire PFB1224UHE include a separate tachometer lead?The specified version has red and black power leads only. A tachometer or PWM lead must not be assumed from another suffix variant.
-
What polarity is required by PFB1224UHE?Connect red to positive and black to negative supply. Check the wiring before energizing rather than relying on a connector's physical fit.
-
Is 5,500 rpm a closed-loop command setting for PFB1224UHE?No. It is the reference rotational speed in the specification, not a user-programmable command or guaranteed speed in every installation.
-
Why can a clogged filter reduce cooling from PFB1224UHE?A filter increases system resistance and shifts the operating point along the fan curve, reducing delivered airflow even if the fan continues to rotate.
-
Does locked-rotor protection on PFB1224UHE remove the need for fault detection?No. It protects the motor circuit under a blocked condition, while the equipment still loses its intended cooling airflow.
-
What must be checked before measuring the noise of PFB1224UHE?Use comparable mounting, operating and measurement conditions. The specified average sound level is not a guarantee of the acoustic level of a complete enclosure.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.






