Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 990-10-XX-01-00 283278-01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 990-10-XX-01-00 283278-01
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:990-10-XX-01-00 283278-01
-
Estimated shipping dimensions:3.1x19x12.8cm
-
Weight:0.26 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Base Family:990
-
Unthreaded Length Code:10
-
Case Length Code:XX
-
Lead Length Code:01
-
Connector / Cable Code:00 283278
-
Approval Code:01
-
Input:One non-contacting proximity probe and extension cable
-
Power:+12 to +35 Vdc
-
Signal Output:4 to 20 mAdc, two-wire
-
Loop Accuracy:Within +/-1.5% over specified full-scale range
-
Maximum Loop Resistance:1000 ohm including cable at 35 Vdc
-
Current Limiting:23 mA typical
-
NOT OK Output:Less than 3.6 mA
-
Prox Out Impedance:10 kohm, calibrated for 10 Mohm load
-
Prox Out Linear Range:1.4 mm (55 mils)
-
Frequency Response:5 Hz to 6000 Hz, +0/-3 dB
-
Minimum Target:9.5 mm diameter
-
Transmitter Operating Temperature:-35 to +85 deg C
-
Transmitter Storage Temperature:-52 to +100 deg C
-
Relative Humidity:100% condensing, non-submerged, with protected coaxial connectors
-
Transmitter Weight:0.43 kg
-
Total System Weight:0.82 kg typical
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 990-10-XX-01-00 283278-01 is a vibration transmitter that accepts one non-contacting proximity probe and extension cable and provides 4 to 20 madc, two-wire. The compact signal-conditioning path is intended for direct integration with machinery monitoring and control channels.
- Input: One non-contacting proximity probe and extension cable.
- Power: +12 to +35 Vdc.
- Signal Output: 4 to 20 mAdc, two-wire.
- Loop Accuracy: Within +/-1.5% over specified full-scale range.
During installation, check supply polarity, loop resistance, probe-chain condition and the receiving channel before applying the measurement to protection or control logic. Verify the live output at the machine operating point after zero, span and cable routing have been confirmed.
Important Notice: Use the exact complete identifier and verify the nameplate, mating hardware, installed system and site procedure before commissioning.
Bently Nevada 990-10-XX-01-00 283278-01 Manuals & Downloads
Bently Nevada 990-10-XX-01-00 283278-01 Technical Reference (PDF)Bently Nevada 990-10-XX-01-00 283278-01 Installation & Commissioning Guide (PDF)
The technical reference organizes manufacturer-supported identity, technical data, evidence boundaries and related models. The installation guide covers nameplate checks, installation readiness, connection, commissioning and acceptance for the exact item.
Identity-controlled maintenance
Use the full identifier when documenting an installed spare or replacement candidate.
System inventory
Record the item within the exact Bently Nevada family and installed measurement chain.
Shutdown inspection
Verify connectors, mounting, routing and visible condition during an authorized outage.
Commissioning evidence
Retain nameplate, configuration and functional-test results with the machine record.
Apply these checks to the exact Bently Nevada 990-10-XX-01-00 283278-01 item.
1
Match the complete identifier before removal or installation.
2
Do not substitute a nearby model or decode an undocumented suffix by analogy.
3
Apply the manufacturer limits only to the component and conditions stated in the source.
4
Confirm all mating components and the total system length where a matched chain is required.
5
Keep connectors clean, dry and mechanically supported.
6
Follow the site isolation and protection-bypass procedure before work.
7
Record the as-found configuration before changing gap, wiring or mounting.
8
Release the item only after the machine-specific functional acceptance is complete.
Technical notes
990-10-XX-01-00 283278-01 should be matched by its complete identifier, installed position and mating components. Before this vibration transmitter returns to service, inspect its mechanical fit and connections and confirm normal operation at the actual monitoring point.
FAQ View All FAQ
-
What length detail applies to 990-10-XX-01-00 283278-01?Unthreaded Length Code is 10.
-
What connection detail applies to 990-10-XX-01-00 283278-01?Connector / Cable Code is 00 283278.
-
How is the approval code specified for 990-10-XX-01-00 283278-01?Approval Code is 01.
-
What input is used with 990-10-XX-01-00 283278-01?Input is One non-contacting proximity probe and extension cable.
-
What power requirement applies to 990-10-XX-01-00 283278-01?Power is +12 to +35 Vdc.
-
What output does 990-10-XX-01-00 283278-01 provide?Signal Output is 4 to 20 mAdc, two-wire.
-
What should be checked before energizing 990-10-XX-01-00 283278-01?Confirm supply polarity, loop resistance, probe-chain condition, shielding and the receiving control input before power is applied.
-
How should 990-10-XX-01-00 283278-01 be commissioned?Check the live loop output, diagnostic signal, zero and span at the installed machine point, then record the accepted readings.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.