Which Bently Nevada components must be matched with 330880-00-00-000-03-02?

Use 330880-00-00-000-03-02 only with the documented PROXPAC XL Proximity Transducer Assembly arrangement, including Compatible 3300 XL 8 mm probe and sleeve, Machine-case mounting boss, Three-conductor shielded field cable.

How should the complete 330880-00-00-000-03-02 order code be checked before installation?

Compare every suffix with the nameplate and the controlling 178554 Rev. E ordering table; the documented assembly model is 330880.

Can 330880-00-00-000-03-02 directly replace another Bently Nevada part number?

Do not assume direct substitution. Match the complete 330880-00-00-000-03-02 code, mechanical interface, cable or housing configuration, system length and approved monitoring-channel arrangement.

Bently Nevada 330880-00-00-000-03-02 PROXPAC XL spare proximity transducer housing with Proximitor Sensor

Name: 330880-00-00-000-03-02
Brand: Bently Nevada
SKU: 330880-00-00-000-03-02

330880-00-00-000-03-02

PROXPAC XL spare proximity transducer housing with Proximitor Sensor

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 330880-00-00-000-03-02

Manufacturer:

Bently Nevada

Product Category:

Machinery Monitoring System

Spare Part Number:

330880-00-00-000-03-02

Estimated shipping dimensions:

33x9x9cm

Weight:

1.5 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Assembly model:

330880

Probe option:

No probe

Proximitor Sensor approval:

Without approvals

Standoff adapter:

None

Probe sleeve:

None

Fittings kit:

One 3/4-14 NPT fitting; one 3/4-to-1/2 NPT reducer; two plugs

Mounting thread:

3/4-14 NPT

Housing rating:

IP66; Type 4X

Housing material:

UV-resistant glass-reinforced conductive PPS

Power without barriers:

-17.5 to -26 V DC; 12 mA maximum

Power with barriers:

-23 to -26 V DC

Output resistance:

50 Ohm

Field-wire conductor range:

0.2 to 1.5 mm2 (16 to 24 AWG)

Maximum field-wire length:

305 m (1000 ft)

Linear range:

2 mm (80 mils)

Recommended gap:

1.27 mm (50 mils)

Incremental scale factor:

7.87 V/mm (200 mV/mil)

Frequency response:

0 to 10 kHz; +0/-3 dB

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 330880-00-00-000-03-02 is proxpac xl spare proximity transducer housing with proximitor sensor. It combines a protective external-adjustment housing and 3300 XL Proximitor Sensor so field wiring can run directly to the monitor.

Supplies the PROXPAC housing without a probe or sleeve
Integrates the Proximitor Sensor inside an IP66 enclosure
Includes the selected NPT fitting and reducer kit
Provides direct three-conductor field wiring to the monitor

330880-00-00-000-03-02 operates with Compatible 3300 XL 8 mm probe and sleeve, Machine-case mounting boss, Three-conductor shielded field cable, Bently Nevada monitor channel.

Engineered applications include Harsh-area radial vibration, Externally adjustable axial position, Remote monitor-cabinet wiring, PROXPAC housing renewal.

Important Notice: Confirm the no-probe/no-sleeve build, 3/4-14 NPT mounting, fitting kit and installed probe-system calibration before closing the housing and proving IP66 integrity.

Apter Power 330880-00-00-000-03-02 Manuals and Guides

Apter Power 330880-00-00-000-03-02 Product Technical Reference PDF Bently Nevada 330880-00-00-000-03-02 Official System Manual PDF

The first document is a model-specific technical reference. The second is the directly related Bently Nevada system document used for installation and engineering verification.

Harsh-area radial vibration

Protects a proximity measurement at exposed machine locations.

Externally adjustable axial position

Allows probe adjustment without opening a separate Proximitor enclosure.

Remote monitor-cabinet wiring

Eliminates the probe-to-Proximitor extension cable.

PROXPAC housing renewal

Replaces the housing and embedded Proximitor Sensor while retaining engineered probe hardware.

Read the applicable Bently Nevada installation instructions before work. Verify 330880-00-00-000-03-02 and the installed PROXPAC XL Proximity Transducer Assembly configuration.

Verify the complete 330880-00-00-000-03-02 code and installed housing arrangement before work.

Place the machine and protection channel in the approved maintenance state.

Confirm the 3/4-14 NPT mounting interface and preserve the machine-case sealing surface.

Isolate the negative DC supply and label power, common and signal conductors before removal.

Protect the conductive PPS cover, internal Proximitor Sensor and gasket surfaces from damage.

Install only the matched 3300 XL probe and sleeve hardware from the documented machine arrangement.

Torque and seal the selected fitting/reducer kit and restore the enclosure without trapping cable stress.

Verify supply, gap voltage, dynamic response, monitor alarms and housing closure before service.

FAQS

What exact system function does 330880-00-00-000-03-02 provide?

330880-00-00-000-03-02 is proxpac xl spare proximity transducer housing with proximitor sensor. It combines a protective external-adjustment housing and 3300 XL Proximitor Sensor so field wiring can run directly to the monitor.
Which Bently Nevada components must be matched with 330880-00-00-000-03-02?

Use 330880-00-00-000-03-02 only with the documented PROXPAC XL Proximity Transducer Assembly arrangement, including Compatible 3300 XL 8 mm probe and sleeve, Machine-case mounting boss, Three-conductor shielded field cable.
How should the complete 330880-00-00-000-03-02 order code be checked before installation?

Compare every suffix with the nameplate and the controlling 178554 Rev. E ordering table; the documented assembly model is 330880.
What installation detail is critical for 330880-00-00-000-03-02?

Confirm the 3/4-14 NPT mounting interface and preserve the machine-case sealing surface.
What wiring or connector checks are required for 330880-00-00-000-03-02?

Isolate the negative DC supply and label power, common and signal conductors before removal.
How should 330880-00-00-000-03-02 be configured with its monitoring channel?

Install only the matched 3300 XL probe and sleeve hardware from the documented machine arrangement.
What commissioning test should be performed after installing 330880-00-00-000-03-02?

Verify supply, gap voltage, dynamic response, monitor alarms and housing closure before service.
Can 330880-00-00-000-03-02 directly replace another Bently Nevada part number?

Do not assume direct substitution. Match the complete 330880-00-00-000-03-02 code, mechanical interface, cable or housing configuration, system length and approved monitoring-channel arrangement.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

330880-00-00-000-03-02

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 330880-00-00-000-03-02

Technical specifications for 330880-00-00-000-03-02

Information

Information