Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330104-03-06-10-02-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330104-03-06-10-02-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330104-03-06-10-02-00
-
Estimated shipping dimensions:1.8x1.5x113cm
-
Weight:0.12 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe construction:With armor
-
Thread:M10 x 1
-
Unthreaded length:30 mm
-
Case length:60 mm
-
Total probe length:1.0 m
-
Connector option:Miniature coaxial ClickLoc
-
Probe-cable type:Standard cable
-
Approval option:Not required
-
Probe-tip diameter:8.0 mm
-
System linear range:2.0 mm (80 mils)
-
Approximate linear-range limits:0.25 to 2.3 mm
-
Approximate output span:-1 to -17 V DC
-
Recommended gap:1.27 mm (50 mils)
-
Nominal output at recommended gap:-9 V DC
-
Incremental scale factor:7.87 V/mm (200 mV/mil)
-
Frequency response:0 to 10 kHz, +0/-3 dB
-
Minimum flat-target diameter:15.2 mm
-
Minimum shaft diameter:50.8 mm
-
Recommended shaft diameter:76.2 mm
-
Probe-cable impedance:75 ohm
-
Standard probe-cable temperature:-52 to +177 degC
-
Proximitor Sensor supply:-17.5 to -26 V DC
-
Proximitor Sensor current:12 mA maximum
-
Proximitor Sensor output resistance:50 ohm
-
Field-wiring conductor range:0.2 to 1.5 mm2 (16 to 24 AWG)
-
Maximum field-wiring length:305 m
Information
Overview
Manuals
Common Applications
Product Precautions
3300 XL 8 mm Armored Metric Proximity Probe provides the documented interface for its installed Bently Nevada 3300 XL 8 mm Proximity Transducer System system.
- Detects shaft-to-bearing relative position without mechanical contact
- Forms the sensing input of a matched eddy-current transducer loop
- Supports radial-vibration, axial-position and shaft-centerline measurements
- Protects the integral probe lead along exposed machinery routing
330104-03-06-10-02-00 senses shaft-to-bearing relative displacement without mechanical contact and passes the probe signal to a matched Proximitor Sensor for machinery-monitoring measurement. The installation uses the manufacturer-specified host position, companion hardware and field/control wiring for the intended industrial application.
System commissioning includes identity checks, connection verification, controlled energization and functional diagnostics for 330104-03-06-10-02-00.
Important Notice: Confirm the complete 330104-03-06-10-02-00 marking, approved system arrangement, connection records and controlled functional test before commissioning or replacement.
Apter Power 330104-03-06-10-02-00 Manuals and Guides
Apter Power 330104-03-06-10-02-00 Product Technical Reference PDF330104-03-06-10-02-00 Engineering Installation and Verification Workbook
The first document organizes model-specific technical identity and engineering data. The second provides a separate field workflow for installation, connection checks and commissioning records.
Steam-turbine radial shaft-vibration measurementMatched 3300 XL 8 mm Proximitor Sensor supports the engineered 330104-03-06-10-02-00 arrangement.
Compressor thrust and axial-position monitoringCompatible machinery-protection monitor channel supports the engineered 330104-03-06-10-02-00 arrangement.
Machine shaft centerline observation during run-upAISI 4140 steel target or manufacturer-approved calibration target supports the engineered 330104-03-06-10-02-00 arrangement.
Armored metric probe renewal in a matched 3300 XL loopMetric probe bracket with supported armored-lead routing supports the engineered 330104-03-06-10-02-00 arrangement.
Read the applicable Bently Nevada installation instructions before work. Verify 330104-03-06-10-02-00 and the installed-system configuration.
1Verify the full 330104-03-06-10-02-00 marking and the 60 mm case length before disturbing the bracket.
2Place the monitored machine and associated protection channel in the approved maintenance state.
3Protect the 8 mm PPS probe tip and keep the M10 x 1 thread free from burrs and contamination.
4Route the 1.0 m standard cable probe lead without sharp bends, crushing or tensile loading.
5Secure the miniature coaxial clickloc connection and keep exposed coaxial interfaces clean and dry.
6Confirm the installed Proximitor Sensor and total system length match the probe configuration.
7Set the static gap within the documented linear region before enabling dynamic measurements.
8Prove polarity, vibration response and alarm action before returning the protection channel to service.
Technical notes
Install 330104-03-06-10-02-00 at the documented 30 mm unthreaded reach and 60 mm case depth while supporting the armored lead. After connection, establish the static gap in the linear region and prove polarity and dynamic response before enabling protection logic.
FAQ View All FAQ
-
What is the measurement role of 330104-03-06-10-02-00?It is the non-contact sensing element in a matched 3300 XL 8 mm eddy-current proximity transducer system.
-
How does the 60 mm case affect installation of 330104-03-06-10-02-00?The mounting bracket and machine clearance must accommodate the complete 60 mm metric case while preserving the specified sensing position.
-
Which mounting thread is used by 330104-03-06-10-02-00?The official ordering code identifies an M10 x 1 threaded armored probe body.
-
Which Proximitor Sensor should be paired with 330104-03-06-10-02-00?Use a matched Bently Nevada 3300 XL 8 mm Proximitor Sensor configured for the one-metre total system length.
-
How should the armored lead of 330104-03-06-10-02-00 be routed?Support the lead, avoid sharp bends, crushing and tensile loading, and keep the coaxial connection clean and dry.
-
How should the static gap be commissioned for 330104-03-06-10-02-00?Position the probe within the manufacturer-documented linear region and confirm the resulting voltage and polarity at the connected monitor channel.
-
Which target material is used to verify 330104-03-06-10-02-00?The published 3300 XL 8 mm performance data use AISI 4140 steel; another target requires a manufacturer-approved calibration.
-
What must be checked after replacing 330104-03-06-10-02-00?Confirm the complete order number, mechanical reach, one-metre system match, ClickLoc integrity, static gap, dynamic response and alarm action.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.