Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for A5E36717793
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for A5E36717793
-
Manufacturer:Siemens
-
Product Category:General Automation
-
Spare Part Number:A5E36717793
-
Estimated shipping dimensions:43.5x15x3.5cm
-
Weight:2.05 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
System documentation:SINAMICS S120 Chassis Power Unit
-
Service context:Drive power-unit maintenance
-
Configuration boundary:Installed system record
Information
Overview
Manuals
Common Applications
Product Precautions
A5E36717793 supports a controlled service operation within the matching SINAMICS S120 Chassis Power Unit power-unit assembly.
- Preserves the complete Siemens article identifier
- Supports a documented SINAMICS power-unit service boundary
- Requires controlled DC-link isolation and discharge
- Returns to service only after connection and diagnostic verification
Match A5E36717793 to the installed SINAMICS power unit and approved maintenance record. Follow the Siemens manual for isolation, DC-link discharge, connections, grounding, cooling and recommissioning.
Important Notice: Confirm A5E36717793, host power-unit designation, hardware revision, power and control interfaces, DC-link discharge, grounding, cooling, firmware, parameter backup and controlled diagnostic results before commissioning.
Apter Power A5E36717793 Manuals and Guides
- Apter Power A5E36717793 SINAMICS Service Technical Reference PDF
- Apter Power A5E36717793 Power-Unit Connection and Validation Workbook PDF
The first document is the model-specific technical and system reference. The second is a distinct field workbook for installation, wiring, commissioning and acceptance records.
SINAMICS power-unit repair
Supports an article-controlled service operation in the matching drive cabinet.
Drive cabinet refurbishment
Provides an exact reference for documenting removed and installed power hardware.
Power-stage connection restoration
Guides controlled recovery of busbar, gate, sensor and protective-conductor interfaces.
Post-repair recommissioning
Supports staged diagnostics and motor-enable checks after approved maintenance.
Read the applicable Siemens installation instructions before work. Verify A5E36717793, the installed host system and all configured field interfaces before isolation, wiring or commissioning.
1
Confirm the complete A5E36717793 marking and the installed SINAMICS power-unit nameplate.
2
Isolate incoming power, lock out the drive and prove the DC link discharged.
3
Record every busbar, semiconductor, gate-drive, sensor and cooling connection.
4
Use ESD controls and protect all control connectors and insulation surfaces.
5
Match hardware revision, connector coding and mechanical interfaces to the as-found assembly.
6
Restore protective grounding, shielding, cooling paths and cabinet clearances.
7
Reload only the approved drive project, firmware and parameter backup.
8
Energize in stages and verify power-unit diagnostics before enabling the motor.
Technical notes
Isolate the complete drive supply and prove the DC link discharged before installing A5E36717793. Record the host revision and all power, control, cooling and protective-conductor connections; complete staged diagnostics before motor operation.
FAQ View All FAQ
-
What exact function does A5E36717793 perform as a SINAMICS Power-unit Service Component?It is handled as an article-specific Siemens service component within the documented SINAMICS power-unit maintenance boundary; no unmatched numerical ratings are assigned.
-
Which host system must be confirmed before installing A5E36717793?Confirm the documented SINAMICS S120 Chassis Power Unit host and the complete A5E36717793 marking before work.
-
Which connection checks are required for A5E36717793?Match all power, busbar, gate-drive, sensor, protective-earth and cooling interfaces to the recorded host assembly.
-
How should the installed configuration for A5E36717793 be preserved?Restore only the approved SINAMICS project, firmware and parameter set associated with the installed power unit.
-
Which diagnostic evidence should be reviewed for A5E36717793?Review DC-link, power-unit, gate-drive, temperature, cooling and communication diagnostics before motor enable.
-
What must be recorded before replacing A5E36717793?Record the complete article and host nameplates, hardware revisions, connection photographs, removed-part identity and parameter backup.
-
How should A5E36717793 be commissioned after installation?Energize the power unit in the Siemens commissioning sequence, verify diagnostics and perform a controlled no-load test.
-
Which model-specific limitation applies to A5E36717793?The official system manuals do not permit ratings to be inferred from the A5E identifier alone; the installed nameplate remains the acceptance boundary.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.