The 330104-00-06-90-02-05 is a Bently Nevada 3300 XL 8 mm non-contacting eddy-current proximity probe with M10 x 1 threads, stainless-steel armor, 0 mm unthreaded length, a 60 mm case, a 9.0 m standard cable, a ClickLoc connector without protector, and CSA, ATEX, and IECEx approvals option 05.
- M10 x 1
- Stainless-steel armor with outer jacket
- 0 mm
- 60 mm
Connected directly to a 9.0 m 330180 Proximitor Sensor, the probe detects distance to a conductive shaft or target and the sensor converts the gap into a voltage for radial vibration, static or axial position, Keyphasor phase reference, and speed measurements on fluid-film-bearing machinery. For dependable operation, follow the official system-matching, mounting, wiring, environmental, and approval instructions.
Important Notice: Connect directly to a 9 m 330180 sensor and verify the 60 mm M10 geometry, bend radius, target, gap, option-05 evidence, and monitoring scale.
Apter Power 330104-00-06-90-02-05 Manuals and Guides
Important Notice: These are two separate Apter Power documents prepared from the official Bently Nevada source named in each document. Confirm the physical nameplate, current manufacturer documentation, and applicable installation drawing before installation or replacement.
Turbine Bearings
Measures shaft-relative radial vibration.
Compressors
Tracks shaft position and vibration on fluid-film bearings.
Axial Position
Measures thrust movement against a conductive target.
Keyphasor Reference
Provides phase reference from suitable target geometry.
Speed Measurement
Supports rotational-speed monitoring channels.
Hazardous-Area Machinery
Option 05 can support certified installations only with the current marking and drawing.
Read and follow the official manufacturer source and applicable installation instructions before use. Verify the exact complete ordering code from the physical nameplate.
1
Connect directly to a 9.0 m 330180 Proximitor Sensor; do not add an extension cable.
2
Verify the 60 mm M10 x 1 mounting geometry and follow the published engagement and torque limits.
3
Maintain the 25.4 mm bend radius and protect the 9 m armored lead from crushing, sharp edges, and connector loading.
4
Set the final gap electrically against the actual target and verify target size, probe spacing, and shaft diameter.
5
Confirm the option-05 nameplate, certificates, barriers, and installation drawing before hazardous-area use.
Videos
News
Applications
