What is 330101-00-18-10-02-05?

330101-00-18-10-02-05 is a configured 3300 XL 8 mm proximity probe.

Which system uses 330101-00-18-10-02-05?

Use 330101-00-18-10-02-05 only in the manufacturer system and hardware arrangement stated in the technical parameters and installation notice on this page.

How do engineers confirm 330101-00-18-10-02-05 compatibility?

Match the complete 330101-00-18-10-02-05 label, hardware revision, host platform, companion hardware, connector and project configuration before replacement.

What should be checked before installing 330101-00-18-10-02-05?

Isolate energy, verify wiring and connector orientation, protect the hardware from ESD and compare every field connection with the approved drawing for 330101-00-18-10-02-05.

What commissioning test is required for 330101-00-18-10-02-05?

Restore power in a controlled sequence and verify status, diagnostics, channel or output response, alarms and the intended process function of 330101-00-18-10-02-05.

How should a technician troubleshoot 330101-00-18-10-02-05?

Record indicators, diagnostics, field measurements, configuration, companion hardware and the operating event before deciding whether 330101-00-18-10-02-05 is faulty.

Can 330101-00-18-10-02-05 replace a similar model directly?

Only after the complete catalog number, series or suffix, electrical rating, connectors, firmware and system compatibility have been compared.

What information should an RFQ for 330101-00-18-10-02-05 include?

Include 330101-00-18-10-02-05, quantity, complete nameplate photographs, hardware revision, installed system, companion hardware and required accessories.

What probe family applies to 330101-00-18-10-02-05?

The product-specific value for 330101-00-18-10-02-05 is 330101, 3/8-24 UNF, without armor. Match it to the installed unit and application before work.

What unthreaded length applies to 330101-00-18-10-02-05?

The product-specific value for 330101-00-18-10-02-05 is 0.0 in. Match it to the installed unit and application before work.

What overall case length applies to 330101-00-18-10-02-05?

The product-specific value for 330101-00-18-10-02-05 is 1.8 in. Match it to the installed unit and application before work.

What total length applies to 330101-00-18-10-02-05?

The product-specific value for 330101-00-18-10-02-05 is 1.0 m. Match it to the installed unit and application before work.

330101-00-18-10-02-05

Name: 330101-00-18-10-02-05
Brand: Bently Nevada
SKU: 330101-00-18-10-02-05

configured 3300 XL 8 mm proximity probe

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

Bently Nevada 330101-00-18-10-02-05 is a 3300 XL 8 mm probe with a 1.8-inch case, 1.0 m standard cable, ClickLoc connector and CSA/ATEX/IECEx approvals.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for 330101-00-18-10-02-05

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for 330101-00-18-10-02-05

Manufacturer:

Bently Nevada
Product Category:

Machinery Monitoring Systems
Spare Part Number:

330101-00-18-10-02-05
Estimated shipping dimensions:

20.5x22.4x3.3cm
Weight:

0.12 kg
Tariff Code:

8537101190
Counliy of origin:

USA
Probe family:

330101, 3/8-24 UNF, without armor
Unthreaded length:

0.0 in
Overall case length:

1.8 in
Total length:

1.0 m
Connector:

ClickLoc, standard cable, no protector
Approval option:

CSA, ATEX and IECEx
Linear range:

2 mm
Scale factor:

7.87 V/mm under specified system conditions
Extension cable:

None for 1.0 m system

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 330101-00-18-10-02-05 is a configured 3300 XL proximity probe for machine vibration and position measurement.

3300 XL measurement chain
Non-contact shaft sensing
Configured probe assembly
Machine-monitoring integration

330101-00-18-10-02-05 is installed as part of a matched 3300 XL proximity transducer system. Confirm the specified extension cable, Proximitor sensor, probe mounting, target gap, connector engagement and channel configuration before placing the measurement channel in service.

Important Notice: Confirm whether the required rack hardware, matched transducer chain, extension leads and configured protection accessories for 330101-00-18-10-02-05 are included in the quotation or stock description.

Apter Power 330101-00-18-10-02-05 Manuals and Guides

Important Notice: These are two separate Apter Power documents independently prepared from manufacturer-published information. Confirm the physical nameplate, current manufacturer documents and installed-system requirements before configuration or installation. They do not replace manufacturer manuals.

330101-00-18-10-02-05 installed-base maintenance

Supports like-for-like service of the documented configured 3300 XL 8 mm proximity probe.

330101-00-18-10-02-05 compatibility review

Checks host hardware, revision, companion components, wiring and configuration before replacement.

330101-00-18-10-02-05 installation planning

Defines isolation, ESD, mounting, connection and parameter checks before field work.

330101-00-18-10-02-05 commissioning

Supports controlled diagnostic, channel, communication or process-response checks after installation.

Read the applicable Baker Hughes / Bently Nevada instructions before work. Verify 330101-00-18-10-02-05 and the installed-system configuration.

Verify model 330101-00-18-10-02-05 and the complete order code on the physical label before use.

Confirm all five option blocks and use a matching 1.0 m 330180 Proximitor without an extension cable; verify target material, mounting and approval drawing.

Match every 330101-00-18-10-02-05 connector, terminal, cable and companion assembly before moving field wiring.

Back up the applicable controller, monitor, HMI or I/O configuration before replacing 330101-00-18-10-02-05.

Isolate energy and follow the approved site safety procedure before handling 330101-00-18-10-02-05.

Follow ESD controls and protect 330101-00-18-10-02-05 connectors and printed-circuit assemblies during handling.

Do not transfer ratings or suffix meanings from a similar model to 330101-00-18-10-02-05.

After installing 330101-00-18-10-02-05, complete the relevant power, channel, link, diagnostic, alarm and fail-state checks.

Technical notes

Confirm all five option blocks and use a matching 1.0 m 330180 Proximitor without an extension cable; verify target material, mounting and approval drawing.

FAQ View All FAQ

What is 330101-00-18-10-02-05?

330101-00-18-10-02-05 is a configured 3300 XL 8 mm proximity probe.
Which system uses 330101-00-18-10-02-05?

Use 330101-00-18-10-02-05 only in the manufacturer system and hardware arrangement stated in the technical parameters and installation notice on this page.
How do engineers confirm 330101-00-18-10-02-05 compatibility?

Match the complete 330101-00-18-10-02-05 label, hardware revision, host platform, companion hardware, connector and project configuration before replacement.
What should be checked before installing 330101-00-18-10-02-05?

Isolate energy, verify wiring and connector orientation, protect the hardware from ESD and compare every field connection with the approved drawing for 330101-00-18-10-02-05.
What commissioning test is required for 330101-00-18-10-02-05?

Restore power in a controlled sequence and verify status, diagnostics, channel or output response, alarms and the intended process function of 330101-00-18-10-02-05.
How should a technician troubleshoot 330101-00-18-10-02-05?

Record indicators, diagnostics, field measurements, configuration, companion hardware and the operating event before deciding whether 330101-00-18-10-02-05 is faulty.

Can 330101-00-18-10-02-05 replace a similar model directly?

Only after the complete catalog number, series or suffix, electrical rating, connectors, firmware and system compatibility have been compared.
What information should an RFQ for 330101-00-18-10-02-05 include?

Include 330101-00-18-10-02-05, quantity, complete nameplate photographs, hardware revision, installed system, companion hardware and required accessories.
What probe family applies to 330101-00-18-10-02-05?

The product-specific value for 330101-00-18-10-02-05 is 330101, 3/8-24 UNF, without armor. Match it to the installed unit and application before work.
What unthreaded length applies to 330101-00-18-10-02-05?

The product-specific value for 330101-00-18-10-02-05 is 0.0 in. Match it to the installed unit and application before work.
What overall case length applies to 330101-00-18-10-02-05?

The product-specific value for 330101-00-18-10-02-05 is 1.8 in. Match it to the installed unit and application before work.
What total length applies to 330101-00-18-10-02-05?

The product-specific value for 330101-00-18-10-02-05 is 1.0 m. Match it to the installed unit and application before work.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.