Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330908-21-35-10-02-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330908-21-35-10-02-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330908-21-35-10-02-00
-
Estimated shipping dimensions:1.6x1.4x66cm
-
Weight:0.05 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe thread:3/8-24 UNF
-
Armor:None
-
Unthreaded length:2.1 in
-
Overall case length:3.5 in
-
Total length:1.0 m
-
Connector option:Standard ClickLoc without protector
-
Agency approval:None
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330908-21-35-10-02-00 is an unarmored 3/8-24 UNF NSv probe with 2.1 in unthreaded length, 3.5 in case and 1.0 m total length. It uses a standard ClickLoc connector without protector and carries the no-approval 00 option.
- English-thread unarmored probe
- 2.1 in unthreaded probe section
- 3.5 in overall case
- 1.0 m lead with uncapped ClickLoc
Verify that the 2.1 in unthreaded section and 3.5 in case fit the probe bracket before tightening 330908-21-35-10-02-00. Protect the uncapped connector and commission only as part of a matched 5 m or 7 m NSv system.
Important Notice: Confirm quotation scope, physical marking, included accessories and installed-system compatibility before work.
Apter Power 330908-21-35-10-02-00 Manuals and Guides
Apter Power 330908-21-35-10-02-00 Product Technical ReferenceBently Nevada 3300 XL NSv Proximity Transducer System Datasheet 147385 Rev. R
Important Notice: The first document is an Apter Power model-specific technical reference; the second link is the unmodified official manufacturer publication.
Bracket-mounted shaft vibration
Uses the defined unthreaded section in a verified English-thread bracket.
Axial position channel
Supports non-contact displacement with a matched NSv sensor chain.
Keyphasor measurement
Provides the probe element for a documented phase-reference loop.
Small-target compressor retrofit
Restores a defined English-thread NSv probe geometry.
Read the applicable Bently Nevada documentation before work. Verify 330908-21-35-10-02-00 from the physical marking and the installed system record.
1
Read the complete 330908-21-35-10-02-00 code from the installed item.
2
Confirm that 2.1 in unthreaded and 3.5 in overall case lengths match the bracket.
3
Keep 3/8-24 thread engagement within the published 0.75 in limit.
4
Use the 11.3 N m recommended torque and avoid loading the unthreaded stem.
5
Provide clean temporary protection for the option-02 connector.
6
Maintain the 25.4 mm cable bend radius and suitable cable support.
7
Pair the 1.0 m probe lead with the correct NSv extension cable and sensor.
8
Set the gap only after target, separation, channel polarity and response checks pass.
Technical notes
Verify that the 2.1 in unthreaded section and 3.5 in case fit the probe bracket before tightening 330908-21-35-10-02-00. Protect the uncapped connector and commission only as part of a matched 5 m or 7 m NSv system.
FAQ View All FAQ
-
How much threaded case remains on 330908-21-35-10-02-00 outside its unthreaded section?The order defines a 3.5 in case and 2.1 in unthreaded section, leaving 1.4 in of threaded case for the mounting arrangement.
-
What engagement ceiling applies to the 3/8-24 thread on 330908-21-35-10-02-00?The published maximum thread engagement is 0.75 in.
-
Is armor included on 330908-21-35-10-02-00?No. The 330908 prefix identifies the unarmored English-thread probe.
-
How should the option-02 connector on 330908-21-35-10-02-00 be protected?It is supplied without a connector protector, so keep it capped, clean and dry through routing and mating.
-
What sensor lengths accept the 1 m lead of 330908-21-35-10-02-00?Use the matching cable with the 5 m or 7 m NSv Proximitor Sensor system-length option.
-
Which static scale factor is nominal for 330908-21-35-10-02-00?The matched NSv system has an average scale factor of 7.87 V/mm, or 200 mV/mil.
-
What counterbore opening is recommended around 330908-21-35-10-02-00?The recommended counterbore diameter is 13 mm; 9.5 mm is the published minimum.
-
Can 330908-21-35-10-02-00 be treated as an approved-area probe?No. The final 00 option specifies no agency approval.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.