Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330180-X1-00 MOD 145004-09
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330180-X1-00 MOD 145004-09
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:145004-09
-
Estimated shipping dimensions:7.8x6x6.5cm
-
Weight:0.2 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Sensor family:3300 XL 8 mm
-
Manufacturer series:330180
-
Sensor input:3300-series 5 mm or 3300 XL 8 mm probe and extension cable
-
Supply:-17.5 to -26 Vdc
-
Maximum consumption:12 mA
-
Output resistance:50 ohm
-
Linear range:2 mm
-
Nominal scale factor:7.87 V/mm
-
Frequency response:0 to 10 kHz
-
MOD code:145004-09; verify from nameplate
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330180-X1-00 MOD 145004-09 is a marked 3300 XL Proximitor Sensor configuration for a 3300 XL 8 mm proximity transducer loop. The current manufacturer datasheet defines the 330180 sensor family but does not decode MOD 145004-09.
- 3300 XL 8 mm Proximitor signal conditioning
- 2 mm published linear measurement range
- Up to 305 m of shielded field wiring
- Nameplate-controlled MOD 145004-09 identity
Record the complete 330180-X1-00 MOD 145004-09 nameplate and installed mounting before replacement. Match the probe and extension cable to the actual system length, then verify power, gap and channel response without assigning an undocumented meaning to the MOD code.
Important Notice: Confirm quotation scope, physical marking, included accessories and installed-system compatibility before work.
Apter Power 330180-X1-00 MOD 145004-09 Manuals and Guides
Apter Power 330180-X1-00 MOD 145004-09 Product Technical ReferenceBently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet 141194 Rev. AM
Important Notice: The first document is an Apter Power model-specific technical reference; the second link is the unmodified official manufacturer publication.
Radial shaft vibration
Conditions the dynamic probe signal for an approved machinery-monitoring channel.
Axial position
Converts probe-to-target displacement into a proportional voltage signal.
Keyphasor reference
Supports phase-reference or speed service when the installed loop is configured for that duty.
Fluid-film bearing machines
Supports non-contact measurements on turbines, compressors, pumps and similar supported machines.
Read the applicable Bently Nevada documentation before work. Verify 330180-X1-00 MOD 145004-09 from the physical marking and the installed system record.
1
Verify the entire 330180-X1-00 MOD 145004-09 marking before work.
2
Do not infer the system-length or mounting digits hidden by X1; record the physical mounting and cable lengths.
3
Do not assign a calibration or approval meaning to MOD 145004-09 without manufacturer confirmation.
4
Provide -17.5 to -26 Vdc and observe the barrier-dependent supply limit where applicable.
5
Use 3-conductor shielded triad field wiring and preserve the approved grounding arrangement.
6
Confirm probe plus extension-cable length matches the installed Proximitor system length.
7
Set the radial-vibration bias near -9 V only after target material and available travel are verified.
8
Prove static position, dynamic response, polarity and alarm action before release.
Technical notes
Record the complete 330180-X1-00 MOD 145004-09 nameplate and installed mounting before replacement. Match the probe and extension cable to the actual system length, then verify power, gap and channel response without assigning an undocumented meaning to the MOD code.
FAQ View All FAQ
-
Which part of 330180-X1-00 MOD 145004-09 is not decoded by publication 141194?The manufacturer datasheet defines the 330180-AA-BB ordering pattern but does not publish the meaning of MOD 145004-09, so that suffix must remain nameplate-controlled.
-
What supply range applies to 330180-X1-00 MOD 145004-09 as a 3300 XL Proximitor Sensor?Use -17.5 to -26 Vdc for the published non-incendive connection; barrier installations require the datasheet's more negative supply range.
-
What sensor input can 330180-X1-00 MOD 145004-09 accept?The 330180 family accepts one non-contacting 3300-series 5 mm or 3300 XL 8 mm probe with its matching extension cable.
-
How should field wiring for 330180-X1-00 MOD 145004-09 be selected?Use 0.2 to 1.5 mm2 wiring; the manufacturer recommends tinned three-conductor shielded triad cable up to 305 m.
-
What radial-vibration gap reference is used for 330180-X1-00 MOD 145004-09?The standard 3300 XL 8 mm system reference is approximately -9 Vdc, corresponding to about 1.27 mm on the specified steel target.
-
Why must the actual cable lengths be recorded for 330180-X1-00 MOD 145004-09?The probe and extension-cable lengths must add up to the Proximitor Sensor system length; X1 does not reveal that complete value.
-
What output loading is used when checking 330180-X1-00 MOD 145004-09?The datasheet performance conditions use a 10 kilohm load and publish a 50 ohm Proximitor output resistance.
-
Which acceptance evidence is appropriate for 330180-X1-00 MOD 145004-09?Record the nameplate, mounting, actual cable lengths, supply voltage, bias gap, static travel, dynamic response and final channel state.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.