Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330901-10-60-70-02-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330901-10-60-70-02-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330901-10-60-70-02-05
-
Estimated shipping dimensions:111×1×1cm
-
Weight:0.04 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe family:3300 XL NSv
-
Thread:1/4-28 UNF
-
Armor:Without armor
-
Unthreaded length:1.0 in
-
Case length:6.0 in
-
Total length:7.0 m
-
Connector option:02, no connector protector
-
Approval option:05, multiple approvals
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330901-10-60-70-02-05 extends the slim-tip 3300 XL NSv sensing family into a long-case, seven-metre probe execution.
- Uses the small-footprint NSv probe geometry for restricted measurement locations.
- Provides a 6.0 in case with a 1.0 in unthreaded section.
- Carries a 7.0 m lead for the selected NSv system arrangement.
- Uses the 1/4-28 UNF unarmored probe execution with multiple approvals.
The long case and lead must be supported and routed so they do not alter the installed gap or place stress on the sensing tip. The matched NSv sensor and cable path determine final performance.
Important Notice: Match the complete 330901-10-60-70-02-05 marking before removing the installed probe. Verify proportional voltage response, polarity and channel indication before returning the machine to service.
Bently Nevada 330901-10-60-70-02-05 Manuals & Downloads
Bently Nevada 330901-10-60-70-02-05 Official Technical Reference Excerpt (PDF)Bently Nevada 330901-10-60-70-02-05 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Shaft-relative vibration
Uses the installed probe position to observe dynamic shaft motion in small-shaft and restricted-clearance locations.
Static position
Supports non-contact measurement of shaft position inside the calibrated transducer-system range.
Machine protection input
Feeds the matched Proximitor sensor and monitoring channel used for alarms and protection logic.
Commissioning verification
Allows gap, signal response and channel direction to be checked after installation.
Before installing Bently Nevada 330901-10-60-70-02-05, confirm the documented system, interfaces and controlled configuration.
1
Match the complete 330901-10-60-70-02-05 marking before removing the installed probe.
2
Confirm the mounting interface is 1/4-28 UNF and that the case provides adequate thread engagement.
3
Keep the probe, extension cable and Proximitor sensor at the documented NSv system electrical length.
4
Protect the probe tip, coaxial lead and ClickLoc connector from impact, contamination and sharp bends.
5
Route the lead away from hot surfaces, rotating parts and locations that can crush or abrade the cable.
6
Use the connector protector only when it is included in the complete ordering code.
7
Set the probe gap with the matched system and the controlled target material before enabling protection.
8
Verify proportional voltage response, polarity and channel indication before returning the machine to service.
Technical notes
Match the complete 330901-10-60-70-02-05 marking before removing the installed probe. Verify proportional voltage response, polarity and channel indication before returning the machine to service.
FAQ View All FAQ
-
Which sensing family does 330901-10-60-70-02-05 belong to?It is a 3300 XL NSv proximity probe with a 1/4-28 UNF thread and no armor.
-
What case geometry is selected by 10-60 in 330901-10-60-70-02-05?The pair specifies a 1.0 in unthreaded length and a 6.0 in overall case.
-
How should the 70 length code in 330901-10-60-70-02-05 be read?The 70 option specifies a 7.0 m total length.
-
What does the terminal 05 select for 330901-10-60-70-02-05?It selects the multiple-approvals execution listed for the NSv probe family.
-
Does code 02 on 330901-10-60-70-02-05 include a connector protector?No. It selects the standard ClickLoc connector without the protector.
-
Why is lead support important for 330901-10-60-70-02-05?The seven-metre lead must be strain-relieved and protected so its routing does not load the probe or connector.
-
Can an 8 mm Proximitor sensor be assumed for 330901-10-60-70-02-05?No. Keep the probe inside the matched 3300 XL NSv transducer system and verify every component identifier.
-
What response test should follow installation of 330901-10-60-70-02-05?Move the target or use an approved verification method to confirm correct proportional response across the intended gap range.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.