Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330881-28-04-214-00-02
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330881-28-04-214-00-02
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330881-28-04-214-00-02
-
Estimated shipping dimensions:25.5×9×9cm
-
Weight:1.25 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Assembly:PROXPAC XL, metric
-
Probe option:3300 XL 8 mm with multiple approvals
-
Standoff adapter:40 mm
-
Probe penetration:214 mm
-
Fittings:No fittings; plugs and washers supplied
-
Mounting thread:3/4-14 NPT
-
Housing function:Integrated probe and Proximitor enclosure
-
Environmental enclosure:Type 4X / IP66 family design
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330881-28-04-214-00-02 integrates the probe, sleeve and Proximitor sensor in a compact Type 4X/IP66 housing for a 214 mm penetration requirement.
- Combines a 3300 XL 8 mm probe and Proximitor sensor in one field housing.
- Uses the multiple-approval probe option selected by code 28.
- Sets the metric penetration dimension to 214 mm.
- Provides a 40 mm standoff with a 3/4-14 NPT mounting-thread execution.
The penetration and standoff dimensions establish the physical reach from the mounting surface toward the machine target. Sleeve support and final gap must be verified at the installed location.
Important Notice: Match the complete 330881-28-04-214-00-02 marking and the assigned machine location before installation. Verify Proximitor output, monitor polarity and dynamic response before enabling protection.
Bently Nevada 330881-28-04-214-00-02 Manuals & Downloads
Bently Nevada 330881-28-04-214-00-02 Official Technical Reference Excerpt (PDF)Bently Nevada 330881-28-04-214-00-02 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Integrated field transducer
Places the sensing probe and signal-conditioning electronics in one protected housing.
Bearing vibration monitoring
Provides a proximity signal for shaft-relative vibration channels.
Position measurement
Supports static shaft-position measurement when installed within the matched range.
Harsh-area installation
Uses the PROXPAC enclosure and the selected mounting interface for protected field installation.
Before installing Bently Nevada 330881-28-04-214-00-02, confirm the documented system, interfaces and controlled configuration.
1
Match the complete 330881-28-04-214-00-02 marking and the assigned machine location before installation.
2
Verify that the 3/4-14 NPT mounting interface and 40 mm standoff match the prepared housing.
3
Confirm that 214 mm probe penetration provides the required reach without contact risk.
4
Provide additional sleeve support when the installed geometry requires it to control resonance.
5
Keep plugs, washers, seals and cable entries clean so the enclosure rating is retained.
6
Do not treat a different standoff or penetration code as an interchangeable assembly.
7
Set the probe gap only after the housing, sleeve and target clearances are secured.
8
Verify Proximitor output, monitor polarity and dynamic response before enabling protection.
Technical notes
Match the complete 330881-28-04-214-00-02 marking and the assigned machine location before installation. Verify Proximitor output, monitor polarity and dynamic response before enabling protection.
FAQ View All FAQ
-
What probe is contained in 330881-28-04-214-00-02?Code 28 selects a 3300 XL 8 mm probe with multiple approvals.
-
How far is the penetration dimension on 330881-28-04-214-00-02?The 214 option specifies 214 mm.
-
Which standoff is built into 330881-28-04-214-00-02?Option 04 specifies a 40 mm metric standoff adapter.
-
What cable-entry kit is selected for 330881-28-04-214-00-02?Option 00 supplies no fittings; the documented plug and washer set is used.
-
Which mounting thread is required by 330881-28-04-214-00-02?The final 02 option selects 3/4-14 NPT.
-
Why must sleeve support be reviewed for 330881-28-04-214-00-02?The combined installed reach can require support to prevent resonance and unstable probe position.
-
What enclosure function does 330881-28-04-214-00-02 provide?PROXPAC XL integrates the probe and Proximitor sensor in a protected field housing.
-
How is 330881-28-04-214-00-02 commissioned?Secure the assembly, set the gap, then verify conditioned output and the assigned monitor-channel response.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.