Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330703-000-060-10-02-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330703-000-060-10-02-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330703-000-060-10-02-00
-
Estimated shipping dimensions:2.5x2x124cm
-
Weight:0.1 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe thread:M14 x 1.5
-
Cable armor:None
-
Unthreaded length:0 mm
-
Overall case length:60 mm
-
Total probe length:1.0 m
-
Connector:Miniature coaxial ClickLoc
-
Connector protector:Not included
-
Agency approval option:00
-
Probe resistance:5.9 +/- 0.5 ohm
-
Probe tip material:PPS
-
Probe case material:AISI 304 stainless steel
-
Cable impedance:75 ohm triaxial
-
Minimum bend radius:25.4 mm (1.0 in)
-
Recommended case torque:21.1 N m (187 in lbf)
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330703-000-060-10-02-00 is 3300 xl 11 mm metric proximity probe. It is a one-metre M14 x 1.5 eddy-current probe for long-range shaft-position and vibration measurements in a matched 3300 XL 11 mm system.
- Uses a 60 mm metric threaded case
- Provides the 11 mm system sensing element
- Carries the signal through a one-metre FEP lead
- Supports the system's extended displacement range
330703-000-060-10-02-00 is installed with five-metre 3300 XL 11 mm Proximitor Sensor, four-metre 330730 extension cable, AISI 4140 steel target, compatible displacement monitor.
Engineered applications include Axial shaft-position monitoring, Differential-expansion measurement, Large-shaft radial vibration, Steam-turbine casing expansion systems.
Important Notice: Confirm the M14 x 1.5 mounting thread, 60 mm case clearance and five-metre system combination; apply the documented case torque, protect the ClickLoc connector and validate the extended linear measurement before service.
Apter Power 330703-000-060-10-02-00 Manuals and Guides
Apter Power 330703-000-060-10-02-00 Product Technical Reference PDF330703-000-060-10-02-00 Engineering Installation and Verification WorkbookThe first document presents model-specific technical identity and engineering data. The second provides a separate installation, connection and commissioning workflow.
Axial shaft-position monitoring
330703-000-060-10-02-00 supports this documented 3300 XL 11 mm Proximity Transducer System engineering task.
Differential-expansion measurement
330703-000-060-10-02-00 supports this documented 3300 XL 11 mm Proximity Transducer System engineering task.
Large-shaft radial vibration
330703-000-060-10-02-00 supports this documented 3300 XL 11 mm Proximity Transducer System engineering task.
Steam-turbine casing expansion systems
330703-000-060-10-02-00 supports this documented 3300 XL 11 mm Proximity Transducer System engineering task.
Read the applicable Bently Nevada instructions before work. Verify 330703-000-060-10-02-00 and the installed-system configuration.
1
Verify the complete 330703-000-060-10-02-00 marking and its documented 3300 XL 11 mm Proximity Transducer System position before field work.
2
Place the monitored machine and associated protection channel in the approved maintenance state before disconnecting 3300 XL 11 mm metric proximity probe.
3
Protect every exposed connector and cable end from oil, moisture, dirt and impact while 330703-000-060-10-02-00 is open.
4
Record probe, extension-cable and Proximitor Sensor identities so the calibrated system length is preserved.
5
Route 330703-000-060-10-02-00 without sharp bends, crushing, abrasion or tensile loading at either coaxial termination.
6
Clean and finger-tighten each ClickLoc connection; never transfer connector torque or wiring practice from a different transducer family.
7
Set the static gap only after mechanical mounting and the complete matched loop have been confirmed.
8
Verify polarity, dynamic response and alarm action before returning the machinery-protection channel to service.
Technical notes
Confirm the M14 x 1.5 mounting thread, 60 mm case clearance and five-metre system combination; apply the documented case torque, protect the ClickLoc connector and validate the extended linear measurement before service.
FAQ View All FAQ
-
What must be recorded before replacing 330703-000-060-10-02-00?Record the full catalog marking, mounting position, companion component numbers, cable route, monitor channel, static gap and as-found polarity.
-
How is the channel recommissioned after installing 330703-000-060-10-02-00?Restore the matched loop, verify supply and bias voltage, prove movement through the expected linear region and test the configured alarm or trip response under controlled conditions.
-
Can 330703-000-060-10-02-00 be mixed with another probe family?Use only combinations explicitly permitted by the 3300 XL 11 mm Proximity Transducer System documentation; connector fit alone does not establish electrical calibration or interchangeability.
-
What maintenance condition should trigger inspection of 330703-000-060-10-02-00?Inspect the assembly after cable impact, connector contamination, abnormal bias voltage, unstable vibration, loss of linear response or any work that changes the probe mounting.
-
Which Bently Nevada transducer system uses 330703-000-060-10-02-00?330703-000-060-10-02-00 belongs to the 3300 XL 11 mm Proximity Transducer System and must be combined only with the probe, extension cable and Proximitor Sensor arrangement documented for that system.
-
How should engineers confirm the system length for 330703-000-060-10-02-00?Add the installed probe lead and extension-cable lengths, then compare the total with the matching Proximitor Sensor length before energizing the channel.
-
What connector checks are required for 330703-000-060-10-02-00?Inspect both mating surfaces for contamination or damage, align the ClickLoc connector correctly and tighten it finger-tight until the locking action is complete.
-
How should 330703-000-060-10-02-00 be routed in a machinery enclosure?Maintain the documented bend radius, provide mechanical support and keep the cable away from sharp edges, hot surfaces and locations that can impose tensile load.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.