Which host hardware must be matched with 330330-080-01-00?

Match 330330-080-01-00 with the documented 3300 XL High Temperature Proximity System and the installed matched 3300 XL 16 mm HTPS probe, 330380 HTPS Proximitor Sensor.

How should the complete 330330-080-01-00 identification be verified?

Compare the full marking with the controlling 141623 Rev. H record; the documented cable model is 330330.

Can 330330-080-01-00 replace a visually similar part directly?

No direct substitution should be assumed. Match the complete 330330-080-01-00 code, interfaces, system length or mounting arrangement, and the approved host configuration.

330330-080-01-00 3300 XL 16 mm HTPS matched extension cable

Name: 330330-080-01-00
Brand: Bently Nevada
SKU: 330330-080-01-00

330330-080-01-00

3300 XL 16 mm HTPS matched extension cable

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 330330-080-01-00

Manufacturer:

Bently Nevada

Product Category:

Machinery Monitoring System

Spare Part Number:

330330-080-01-00

Estimated shipping dimensions:

30×30×8.0cm

Weight:

0.85 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Cable model:

330330

Cable length:

8.0 m (26.3 ft)

Armor:

With stainless-steel armor

Agency approval option:

Not required

Cable impedance:

75 Ohm

Operating temperature:

-52 to +177 degC

Minimum bend radius:

25.4 mm (1.0 in)

Power supply:

-19.6 to -26 V DC; 12 mA maximum

Supply sensitivity:

<13 mV/V

Output resistance:

50 Ohm

Linear range:

4.0 mm (160 mils)

Linear-range limits:

0.5 to 4.5 mm (20 to 180 mils)

Recommended gap:

2.5 mm (100 mils)

Incremental scale factor:

3.94 V/mm (100 mV/mil), +/-9.65%

Frequency response:

0 to 6 kHz

Minimum target diameter:

30.5 mm (1.2 in)

Minimum shaft diameter:

152 mm (6.0 in)

Cable impedance:

75 Ohm

Extension-cable temperature:

-52 to +177 degC

Proximitor Sensor temperature:

-52 to +100 degC

Minimum bend radius:

25.4 mm (1.0 in)

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 330330-080-01-00 is 3300 xl 16 mm htps matched extension cable. It is a probe-matched extension cable that carries the high-temperature proximity signal between the 16 mm HTPS probe and Proximitor Sensor.

Provides the documented 8.0 m (26.3 ft) matched cable length
Uses the with stainless-steel armor execution
Carries the 75-ohm high-temperature coaxial signal
Requires serial-number-based matching when ordered as a spare

330330-080-01-00 operates with matched 3300 XL 16 mm HTPS probe, 330380 HTPS Proximitor Sensor, ClickLoc connector pair, approved high-temperature cable route.

Engineered applications include Gas-turbine high-temperature proximity, Thermal shaft-position measurement, HTPS signal routing, Matched cable replacement.

Important Notice: Confirm 330330-080-01-00, 8.0 m (26.3 ft) length, with stainless-steel armor and the original probe serial number; preserve connector torque, bend radius and matched capacitance before gap and scale verification.

Apter Power 330330-080-01-00 Manuals and Guides

Apter Power 330330-080-01-00 System and Technical Reference PDF Bently Nevada 330330-080-01-00 Official Engineering Document PDF

The first document provides model-specific technical and system-reference information. The second is the directly related manufacturer document used for installation, configuration and engineering verification.

Gas-turbine high-temperature proximity

Connects a hot-zone probe to electronics outside the immediate measuring point.

Thermal shaft-position measurement

Maintains the calibrated capacitance of the HTPS loop.

HTPS signal routing

Supports shaft-position monitoring under elevated probe temperatures.

Matched cable replacement

Restores a damaged extension cable through serial-number matching.

Read the applicable Bently Nevada instructions before work. Verify 330330-080-01-00 and the installed 3300 XL High Temperature Proximity System configuration.

Verify 330330-080-01-00, 8.0 m (26.3 ft) cable length and with stainless-steel armor execution before work.

Place the monitored machine and HTPS channel in the approved maintenance state.

Record the matched probe serial number and installed cable route.

Protect both ClickLoc connectors from heat, contamination and mechanical load.

Support the cable to maintain bend radius and avoid contact with hotter surfaces.

Use only the replacement cable matched to the original probe capacitance.

Make the connector joint finger-tight and follow the documented maximum torque limit.

Verify continuity, gap voltage, scale and alarm response after reconnection.

FAQS

What is the documented system role of 330330-080-01-00?

330330-080-01-00 is 3300 xl 16 mm htps matched extension cable. It is a probe-matched extension cable that carries the high-temperature proximity signal between the 16 mm HTPS probe and Proximitor Sensor.
Which host hardware must be matched with 330330-080-01-00?

Match 330330-080-01-00 with the documented 3300 XL High Temperature Proximity System and the installed matched 3300 XL 16 mm HTPS probe, 330380 HTPS Proximitor Sensor.
How should the complete 330330-080-01-00 identification be verified?

Compare the full marking with the controlling 141623 Rev. H record; the documented cable model is 330330.
What connection check is required before installing 330330-080-01-00?

Protect both ClickLoc connectors from heat, contamination and mechanical load.
How should 330330-080-01-00 be protected during handling?

Support the cable to maintain bend radius and avoid contact with hotter surfaces.
What configuration must be restored after replacing 330330-080-01-00?

Use only the replacement cable matched to the original probe capacitance.
What commissioning test is required for 330330-080-01-00?

Verify continuity, gap voltage, scale and alarm response after reconnection.
Can 330330-080-01-00 replace a visually similar part directly?

No direct substitution should be assumed. Match the complete 330330-080-01-00 code, interfaces, system length or mounting arrangement, and the approved host configuration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

330330-080-01-00

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 330330-080-01-00

Technical specifications for 330330-080-01-00

Information

Information