-
Match the complete marking
Include 330192-00-25-10-00 and any revision or assembly number visible on the item. Keep the exact reference on your enquiry and quotation.
-
Check the offered item before ordering
Request available label and connection photos. Have your maintenance team compare the offered 330192-00-25-10-00 with the installed equipment and applicable Bently Nevada documentation.
Technical specifications for 330192-00-25-10-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330192-00-25-10-00
-
Weight:0.25 kg
-
Tariff Code:8537101190
-
Probe family:3300 XL 8 mm extended-temperature range
-
Mounting thread:3/8-24 UNF-2A
-
Cable armor:Stainless-steel armor
-
Unthreaded length:0.0 in (00 option)
-
Overall case length:2.5 in
-
Integral lead length:1.0 m
-
Approval option:00; agency approval not required
-
Probe tip:8 mm nominal diameter
-
Probe-tip temperature:-52 to +218 deg C, ETR design
-
Cable and connector temperature:-51 to +260 deg C, ETR design
-
Matched-system linear range:2.0 mm (80 mils), reference setup
Information
- Bently Nevada 330192-00-25-10-00 is an armored 3300 XL 8 mm extended-temperature proximity probe with a 3/8-24 UNF case, 2.5 in overall case length and 1.0 m integral cable.
Chain dependency: The probe requires its matched Proximitor to produce the monitor signal.
Acceptance record: Retain the as-left gap and live vibration baseline after installation.
The eddy-current probe is one element of a 3300 XL 8 mm measuring chain. The published 2.0 mm linear range and 7.87 V/mm incremental scale belong to a matched system on the manufacturer reference target; the probe alone has no standalone voltage output.
ETR ratings distinguish the sensing tip from its cable and connector. Locate the latter within their own environmental limits, confirm the installed Proximitor length and set the operating gap against the approved machine baseline.
-
Bently Nevada 330192-00-25-10-00 technical reference
Original manufacturer Bently Nevada 3300 XL 8 mm Proximity Transducer System, 141194 Rev. AN. Family specifications and ordering information. -
Bently Nevada 330192-00-25-10-00 engineering guide
Apter Power installation, interface and fault-isolation guide for the offered complete model.
Platform applications: The applications below describe the complete measuring-channel functions. Verify the target, mounting position and approved channel design before selecting a replacement.
-
Radial shaft vibration
Place the tip radially at the approved bearing location and verify target clearance over the shaft orbit. -
Axial position
Orient the probe toward a suitable conductive thrust target; validate the working span against expected axial travel. -
Shaft average position
Use the static gap component only after the channel and target material have been calibrated together. -
High-temperature sensing point
Keep the tip, armored lead, connector and Proximitor within their separate published temperature limits.
Compare the fully threaded 2.5 in case and 3/8-24 machine port with the installed drawing before setting gap.
Avoid sharp bends and abrasion at the armor ferrule; support the lead without stressing the case exit.
Confirm the 1.0 m probe lead is paired with the corresponding 3300 XL 8 mm Proximitor arrangement.
Do not transfer the AISI 4140 reference scale to a different alloy without an installed-system check.
Inspect and protect the miniature coaxial joint against contamination and liquid entry.
Record the final gap voltage and running signal against the approved channel baseline.
Alternative Names
Technical notes
Installation relationship: Compare the fully threaded 2.5 in case and 3/8-24 machine port with the installed drawing before setting gap.
Measurement boundary: Do not transfer the AISI 4140 reference scale to a different alloy without an installed-system check.
Technical reference: Bently Nevada 3300 XL 8 mm Proximity Transducer System, 141194 Rev. AN.
FAQ View All FAQ
-
What changes in the channel if 330192-00-25-10-00 is paired with a Proximitor of the wrong electrical length?The calibration curve and scale can shift even if the channel still produces a plausible voltage. Match the complete probe lead, any extension and Proximitor length before acceptance.
-
Why can 330192-00-25-10-00 show a changed gap voltage after the target alloy is replaced?Eddy-current response depends on target conductivity and magnetic properties. Recheck the complete system against the actual target and record a new accepted gap baseline.
-
How should an intermittent signal from 330192-00-25-10-00 be isolated at the coaxial joint?With the channel isolated, inspect mating surfaces, connector retention and strain relief, then compare the probe-only resistance with the applicable manufacturer value before replacing electronics.
-
What can reduce the high-frequency response of a channel using 330192-00-25-10-00?Long field wiring, barriers or loading can attenuate the dynamic signal while static gap remains plausible. Check the approved monitor interface and manufacturer response curves.
-
When does the ETR construction of 330192-00-25-10-00 need a separate cable-temperature check?The ETR tip and cable/connector have distinct temperature limits. Assess actual temperatures at the sensing point, cable route and junction before release.
-
How can nearby metal affect the response of 330192-00-25-10-00?Metal within the probe field can produce side-view or rear-view effects. Compare counterbore and adjacent geometry with the machine drawing and verify the final gap in situ.
-
What routing defect can undermine the armor protection on 330192-00-25-10-00?Bending or pulling at the armor ferrule can damage the internal coaxial lead. Support the route and inspect the cable exit during an isolated continuity check.
-
Which acceptance values should be retained after replacing 330192-00-25-10-00?Keep the complete probe and Proximitor markings, probe resistance, target material, as-left gap voltage and live vibration trend with the machine maintenance record.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.




