Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330190-045-01-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330190-045-01-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330190-045-01-05
-
Estimated shipping dimensions:28×27×2cm
-
Weight:0.44 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Cable type:3300 XL Extended Temperature Range
-
Length:4.5 m
-
Armor option:Armored cable
-
Approval option:CSA/ATEX/IECEx
-
System constraint:Use only with the matched ETR probe and Proximitor sensor
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330190-045-01-05 completes an ETR probe system with a 4.5 m armored coaxial cable section.
- Uses PFA-insulated ETR cable construction for the documented family.
- Provides a 4.5 m calibrated extension section.
- Adds mechanical armor around the ETR cable.
- Selects the multiple-approval execution.
ETR construction does not make mixed probe-system components interchangeable. Verify the exact probe family, electrical length and signal conditioner before connection.
Important Notice: Verify the complete 330190-045-01-05 identifier and installed system length before replacement. Record gap voltage and dynamic response after the full signal chain is restored.
Bently Nevada 330190-045-01-05 Manuals & Downloads
Bently Nevada 330190-045-01-05 Official Technical Reference Excerpt (PDF)Bently Nevada 330190-045-01-05 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Matched electrical-length completion
Completes the probe-to-Proximitor path where a 4.5 m extension section is required.
Machinery vibration channels
Carries the proximity signal between the probe lead and the matched signal conditioner.
Position monitoring
Maintains the calibrated cable path used for static shaft-position measurements.
Maintenance replacement
Restores a damaged extension segment without changing the specified system length.
Before installing Bently Nevada 330190-045-01-05, confirm the documented system, interfaces and controlled configuration.
1
Verify the complete 330190-045-01-05 identifier and installed system length before replacement.
2
Confirm the required cable construction is armored ETR cable.
3
Do not shorten, splice or field-repair the calibrated coaxial cable.
4
Clean and inspect both ClickLoc mating surfaces before connection.
5
Route the cable with strain relief and protect it from abrasion, hot surfaces and moving hardware.
6
Keep probe, extension-cable and Proximitor family components matched as one calibrated system.
7
Check connector engagement and cable continuity before energizing the monitoring channel.
8
Record gap voltage and dynamic response after the full signal chain is restored.
Technical notes
Verify the complete 330190-045-01-05 identifier and installed system length before replacement. Record gap voltage and dynamic response after the full signal chain is restored.
FAQ View All FAQ
-
What makes 330190-045-01-05 an ETR cable?The 330190 family is the extended-temperature-range extension-cable construction.
-
Which calibrated length is selected in 330190-045-01-05?Code 045 specifies 4.5 m.
-
Does 330190-045-01-05 carry armor?Yes. Cable option 01 is armored.
-
How does terminal code 05 define the ETR cable execution 330190-045-01-05?Code 05 selects the CSA, ATEX and IECEx approval execution.
-
Can 330190-045-01-05 be inserted into a standard-cable system?Do not assume so; confirm that the probe and Proximitor sensor are the matched ETR family and electrical length.
-
What should be inspected at each end of 330190-045-01-05?Check ClickLoc cleanliness, positive engagement, armor termination and cable strain relief.
-
Why is the 4.5 m value critical for 330190-045-01-05?The probe lead plus this extension must equal the Proximitor system length.
-
How should the repaired ETR channel be accepted with 330190-045-01-05?Confirm stable gap voltage, proportional target response and normal monitor diagnostics.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.