Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330180-90-CN
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330180-90-CN
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330180-90-CN
-
Estimated shipping dimensions:7.8x6x6.4cm
-
Weight:0.22 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Component:Proximitor Sensor
-
System length:9.0 m
-
Mounting option:Panel mount
-
Country option:CN
-
Nominal scale factor:7.87 V/mm (200 mV/mil)
-
Frequency response:0 to 10 kHz
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330180-90-CN is a panel-mount 3300 XL 8 mm Proximitor Sensor for a 9.0 m calibrated system length. Its CN suffix is a country-specific ordering option listed in the manufacturer approval guide.
- Nine-metre calibrated sensor
- Panel-mount configuration
- 200 mV/mil nominal scale factor
- Country-specific CN ordering option
Mount 330180-90-CN on the documented panel with the required isolation and connect only a probe-plus-extension combination totaling 9 m. Verify supply, field wiring, CN marking, gap voltage and channel scaling before commissioning.
Important Notice: Confirm quotation scope, physical marking, included accessories and installed-system compatibility before work.
Apter Power 330180-90-CN Manuals and Guides
Apter Power 330180-90-CN Product Technical ReferenceBently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet 141194 Rev. AM
Important Notice: The first document is an Apter Power model-specific technical reference; the second link is the unmodified official manufacturer publication.
Radial vibration signal conditioning
Converts the matched probe loop into a monitor-compatible voltage.
Static shaft-position channel
Provides the conditioned DC gap signal for position measurement.
Keyphasor or speed input
Supports reference and speed functions with an appropriate probe target.
Panel retrofit
Restores a documented 9 m panel-mount Proximitor configuration.
Read the applicable Bently Nevada documentation before work. Verify 330180-90-CN from the physical marking and the installed system record.
1
Verify the complete 330180-90-CN code and CN approval marking.
2
Use only a probe and extension cable whose combined length is exactly 9 m.
3
Mount the sensor on the documented panel and retain required electrical isolation.
4
Confirm the negative DC supply and common wiring before energizing.
5
Separate field wiring from noise sources and preserve cable shields and connector condition.
6
Set the probe gap within the published 2 mm linear range and confirm nominal scaling.
7
Check the CN option against the actual location and current approval requirements.
8
Record gap voltage, waveform, monitor scaling and protection-channel response before release.
Technical notes
Mount 330180-90-CN on the documented panel with the required isolation and connect only a probe-plus-extension combination totaling 9 m. Verify supply, field wiring, CN marking, gap voltage and channel scaling before commissioning.
FAQ View All FAQ
-
Which probe-and-cable combinations may be connected to 330180-90-CN?Use an 8 mm probe and matching extension cable whose combined electrical length is 9 m.
-
Where is 330180-90-CN intended to be mounted?Order code 90 specifies the nine-metre panel-mount Proximitor Sensor configuration.
-
What scale factor should the monitor use with 330180-90-CN?The nominal average scale factor is 7.87 V/mm, equivalent to 200 mV/mil.
-
Which field output from 330180-90-CN represents probe gap?The conditioned output voltage carries the static gap component and dynamic vibration signal for the connected monitor.
-
What frequency response should be proven for 330180-90-CN?The published system response is 0 to 10 kHz within the specified tolerance.
-
How should radio-frequency interference be controlled around 330180-90-CN?Use the manufacturer mounting, grounding, shielding and enclosure guidance and verify the installed noise floor.
-
What does CN require on the acceptance record for 330180-90-CN?Record the physical country-specific marking and verify its suitability against current site approval requirements.
-
What is the correct radial-vibration gap target for a loop using 330180-90-CN?Bias the matched 8 mm loop at approximately -9 V or 1.27 mm, then verify usable linear travel in the real installation.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.