Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330854-080-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330854-080-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330854-080-05
-
Estimated shipping dimensions:22.5x1.2x24cm
-
Weight:0.16 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Cable model:330854
-
Cable length:8.0 m (26.2 ft)
-
Agency approval option:Multiple approvals
-
Cable impedance:75 Ohm
-
Cable capacitance:69.9 pF/m typical
-
Minimum bend radius:25.4 mm (1.0 in)
-
Extension-cable resistance:Core 2.0 +/-0.5 Ohm; jacket 0.6 +/-0.2 Ohm
-
Operating temperature:-35 to +200 degC
-
Short-term temperature:+250 degC maximum for less than 24 h
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330854-080-05 is 3300 xl 25 mm extension cable. It extends the matched 25 mm probe connection to the Proximitor Sensor while preserving the calibrated transducer-system length.
- Provides an eight-metre 75-ohm coaxial signal path
- Completes a documented nine-metre 25 mm system with a one-metre probe
- Preserves the documented matched-cable electrical path
- Carries the approved multiple-approval execution
330854-080-05 operates with one-metre 3300 XL 25 mm probe, nine-metre 25 mm Proximitor Sensor, ClickLoc connector interfaces, approved cable supports.
Engineered applications include Remote 25 mm Proximitor connection, Turbine expansion-signal routing, High-temperature cable path, Matched extension-cable renewal.
Important Notice: Verify 330854-080-05, the eight-metre length; make sure probe plus cable equals the Proximitor system length and prove connector cleanliness, continuity and scale.
Apter Power 330854-080-05 Manuals and Guides
Apter Power 330854-080-05 System and Technical Reference PDFBently Nevada 330854-080-05 Official Engineering Document PDFThe first document provides model-specific technical and system-reference information. The second is the directly related manufacturer document used for installation, configuration and engineering verification.
Remote 25 mm Proximitor connection
Connects a one-metre large-range probe to remote electronics.
Turbine expansion-signal routing
Routes the proximity signal through an eight-metre field path.
High-temperature cable path
Supports expansion measurements with remote cabinet mounting.
Matched extension-cable renewal
Restores the exact extension element of a calibrated system.
Read the applicable Bently Nevada instructions before work. Verify 330854-080-05 and the installed 3300 XL 25 mm Proximity Transducer System configuration.
1
Verify 330854-080-05, the eight-metre tag before routing.
2
Place the associated displacement channel in the approved maintenance state.
3
Inspect the jacket, connector bodies and sealing surfaces before installation.
4
Support the cable without tension and maintain the documented minimum bend radius.
5
Keep both ClickLoc connections clean, dry and fully engaged.
6
Match probe plus extension cable to the nine-metre 25 mm Proximitor Sensor.
7
Check core and jacket continuity without disturbing calibrated connector hardware.
8
Verify gap voltage, scale, polarity and dynamic response after reconnection.
Technical notes
Verify 330854-080-05, the eight-metre length; make sure probe plus cable equals the Proximitor system length and prove connector cleanliness, continuity and scale.
FAQ View All FAQ
-
What is the documented system role of 330854-080-05?330854-080-05 is 3300 xl 25 mm extension cable. It extends the matched 25 mm probe connection to the Proximitor Sensor while preserving the calibrated transducer-system length.
-
Which host hardware must be matched with 330854-080-05?Match 330854-080-05 with the documented 3300 XL 25 mm Proximity Transducer System and the installed one-metre 3300 XL 25 mm probe, nine-metre 25 mm Proximitor Sensor.
-
How should the complete 330854-080-05 identification be verified?Compare the full marking with the controlling 163236 Rev. M record; the documented cable model is 330854.
-
What connection check is required before installing 330854-080-05?Support the cable without tension and maintain the documented minimum bend radius.
-
How should 330854-080-05 be protected during handling?Keep both ClickLoc connections clean, dry and fully engaged.
-
What configuration must be restored after replacing 330854-080-05?Match probe plus extension cable to the nine-metre 25 mm Proximitor Sensor.
-
What commissioning test is required for 330854-080-05?Verify gap voltage, scale, polarity and dynamic response after reconnection.
-
Can 330854-080-05 replace a visually similar part directly?No direct substitution should be assumed. Match the complete 330854-080-05 code, interfaces, system length or mounting arrangement, and the approved host configuration.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.