Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330105-02-12-15-02-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include the complete Bently Nevada 330105-02-12-15-02-05 marking and any hardware revision on the item. Compare the complete order code, mating interfaces and installed measurement chain.
-
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered 330105-02-12-15-02-05 with the installed equipment and applicable Bently Nevada documents.
Technical specifications for 330105-02-12-15-02-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330105-02-12-15-02-05
-
Weight:0.05 kg
-
Tariff Code:8537101190
-
Probe construction:Reverse mount
-
Mounting thread:3/8-24 UNF
-
Tip diameter:8 mm
-
Probe length:1.5 m
-
Connector:Miniature ClickLoc coaxial
-
Probe resistance:7.73 ohm ±0.50 ohm
-
System linear range:2 mm
-
System scale factor:7.87 V/mm
-
Reference gap:1.27 mm
-
Calibration target:AISI 4140 steel
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- Bently Nevada 330105-02-12-15-02-05 supports rear-access probe installation through a reverse-mount sleeve while retaining the XL 8 mm measurement characteristics.
Mounting: 3/8-24 UNF; fixed reverse-mount geometry
Lead configuration: 1.5 m; standard cable
Matched-system scale: 7.87 V/mm
Lead configuration: 1.5 m; standard cable
Matched-system scale: 7.87 V/mm
The reverse-mount construction allows the probe to be installed through its appropriate sleeve arrangement. The fixed 02-12 designation must not be interpreted using the variable unthreaded and case-length fields of a conventional probe.
The 1.5 m probe length combines with a 3.5 m compatible extension for a 5 m system. The miniature ClickLoc connector couples the passive probe to the electrical chain without adding a separately powered field device.
Sleeve positioning, rear access and the final gap must be checked together. After replacement, verify both continuity and target response so a mechanically correct fit is not mistaken for a correctly calibrated measurement channel.
The 1.5 m probe length combines with a 3.5 m compatible extension for a 5 m system. The miniature ClickLoc connector couples the passive probe to the electrical chain without adding a separately powered field device.
Sleeve positioning, rear access and the final gap must be checked together. After replacement, verify both continuity and target response so a mechanically correct fit is not mistaken for a correctly calibrated measurement channel.
Controller platform reference: 3300 XL 8 mm Proximity Transducer System. Follow the applicable installation instructions and approved measurement-chain design.
The original technical excerpt applicable to Bently Nevada 330105-02-12-15-02-05 covers system performance, probe connections and applicable order selections. The separate installation guide covers mounting, cable matching, target clearance, gap and signal checks.
330105-02-12-15-02-05 Official Technical Excerpt
The original technical excerpt applicable to Bently Nevada 330105-02-12-15-02-05 covers system performance, probe connections and applicable order selections. PDF · 6 pages.330105-02-12-15-02-05 Installation & Verification Guide
Apter Power installation and verification guide covering mounting, cable matching, target clearance, gap and signal checks. PDF · 5 pages.
Original manufacturer pages retain their technical context. Use the Apter Power guide with the applicable manufacturer instructions and approved installation design.
System and supply context: The probe works with the corresponding extension cable and Proximitor; the supplied item does not include the complete measurement channel.
Application scope: Apply the 3/8-24 UNF installation to its intended target and keep the selected 1.5 m probe length in the electrical-length calculation.
Application scope: Apply the 3/8-24 UNF installation to its intended target and keep the selected 1.5 m probe length in the electrical-length calculation.
Rear-access installation
Use the reverse-mount sleeve for probe access from the intended side.Sleeve-mounted shaft sensing
Position the tip through a compatible mechanical assembly.Five-metre calibration
Match a 1.5 m probe and 3.5 m extension to the 5 m sensor.Maintenance replacement
Retain sleeve position and verify the restored gap.
Prepare Bently Nevada 330105-02-12-15-02-05 for its configured installation using these checks.
Mounting interface
Match the 3/8-24 UNF installation and selected case geometry.
Cable handling
Retain the standard cable construction and avoid connector strain.
Electrical length
Match the probe and extension cable to the Proximitor calibration.
Target calibration
Assess target material and clearance before applying nominal sensitivity.
Gap setting
Establish the gap using the complete energized measurement chain.
Channel test
Check static response, dynamic indication and configured alarms.
Alternative Names
330105 02 12 15 02 05
Bently Nevada 330105-02-12-15-02-05
Technical notes
Signal and interface: The 2 mm linear range and 7.87 V/mm scale factor belong to the complete matched system; the probe alone does not establish these ratings.
Installation boundary: The reference gap is 1.27 mm (approximately -9 V for radial vibration). Confirm target material, available travel and correct total electrical length before using the nominal calibration.
Technical basis: Bently Nevada 3300 XL 8 mm Proximity Transducer System, 141194 Rev. AN. Ordering selections apply to this complete probe code. Range, scale factor and gap are matched-system values under the specified calibration conditions.
FAQ View All FAQ
-
Is 330105-02-12-15-02-05 a conventional front-mount probe?No. The 330105-02-12 construction is the XL 8 mm reverse-mount probe with 3/8-24 UNF threads.
-
Should the 02-12 fields of 330105-02-12-15-02-05 be decoded as ordinary case options?No. They are part of the fixed reverse-mount designation; use the reverse-mount drawing and sleeve arrangement.
-
How is a 5 m chain assembled around 330105-02-12-15-02-05?Combine its 1.5 m probe length with a compatible 3.5 m extension and a 5 m Proximitor.
-
What nominal resistance belongs to 330105-02-12-15-02-05?For a 1.5 m probe, nominal center-to-outer-conductor resistance is 7.73 ohm ±0.50 ohm.
-
Does 330105-02-12-15-02-05 require a separate positive DC supply at the tip?No. The passive probe connects through the matched cable to its Proximitor, which provides the system electronics.
-
Why must the sleeve be checked when fitting 330105-02-12-15-02-05?Reverse mounting depends on the sleeve and rear-access arrangement; a matching thread alone does not prove correct probe position or access.
-
Which connector is selected on 330105-02-12-15-02-05?The 02 connection uses a miniature ClickLoc coaxial connector with the standard probe cable.
-
What system calibration applies after installing 330105-02-12-15-02-05?Use the matched XL 8 mm system scale of 7.87 V/mm and its 2 mm linear range under the specified target and temperature conditions.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.