• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Speak to a sourcing specialist
      sales13@apterpower.com
      About Us Contact Us
      +86 18030235313 Need the right part?We are here to help.

      330706-005-046-10-02-00

      Reverse Mount Probe
      Ships by Sunday, November 8
      Product image is representative; revision or series may vary. Contact us to request a specific version.

      Product Describe：

      Bently Nevada 330706-005-046-10-02-00 is an M10 x 1 reverse-mount 11 mm proximity probe with a 1.0 m integral lead. It uses a miniature ClickLoc connector in a matched 3300 XL 11 mm measurement system.
      • Manufacturer part number
        330706-005-046-10-02-00
      • Shipping
        Swift global dispatch
      • Condition
        New, original product
      • Shipping size (est.)
        1.2cm x 1.2cm x 119cm
      • Country of Origin
        USA

      Ask our team:

      Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com
      Dispatch Planning
      Confirm stock and lead time with our team.
      Dedicated Manager
      Personalized one-to-one VIP service
      ISO 9001:2015 Certified
      Trusted quality management
      Get a quick price for 330706-005-046-10-02-00
      E-mail *
      Mobile *
      Company
      Content *
      Quantity *
      Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
      Get a Quote
      For more information on how your data is processed and stored by Apterpower please read our privacy policy

      What happens after you enquire

      • 0

        Review your reference

        Provide the complete 330706-005-046-10-02-00 marking and installed configuration.
      • 1

        Confirm the offer

        Match the metric reverse-mount geometry, 1 m electrical lead, connector and complete 11 mm system calibration. Do not substitute an 8 mm system component.
      • 2

        Arrange dispatch

        Confirm quantity and dispatch date after technical and supply details are agreed.

      • Match the complete marking

        M10 x 1 reverse mounting, fixed 5 mm / 46 mm case geometry, a 1 m lead and miniature clickloc connector. Match the metric reverse-mount geometry, 1 m electrical lead, connector and complete 11 mm system calibration. Do not substitute an 8 mm system component.

      • Check the offered item before ordering

        The listed item is the probe. A matching extension, 11 mm Proximitor and mounting hardware are required for the measurement system and are supplied only when itemized. Retain the current channel settings for verification.

      Technical specifications for 330706-005-046-10-02-00

      • Manufacturer:
        Bently Nevada
      • Product Category:
        Machinery Monitoring Systems
      • Spare Part Number:
        330706-005-046-10-02-00
      • Weight:
        0.05 kg
      • Tariff Code:
        8537101190
      • Sensing principle:
        Non-contact eddy current
      • Sensing tip:
        11 mm nominal, PPS
      • Case thread:
        M10 x 1, reverse mount
      • Unthreaded length:
        5 mm
      • Case length:
        46 mm
      • Integral lead length:
        1.0 m
      • Connector:
        Miniature ClickLoc coaxial
      • Cable impedance:
        75 ohms triaxial
      • Cable insulation:
        FEP
      • Probe resistance:
        5.9 ±0.5 ohms at 1 m
      • System scale factor:
        3.94 V/mm (100 mV/mil) nominal
      • System linear range:
        4 mm; 0.5 to 4.5 mm gap
      • Recommended nominal gap:
        2.5 mm
      • Compatible system lengths:
        5 m or 9 m with matching components
      • Probe temperature:
        -52 to +177 °C
      • Recommended case torque:
        7.5 N·m for reverse-mount probe
      • Maximum case torque:
        22.6 N·m
      • Minimum cable bend radius:
        25.4 mm
      • Minimum flat target diameter:
        30.5 mm
      • Minimum shaft diameter:
        152 mm for specified performance
      View as PDF Ask for Quote

      Information

      Overview Downloads Applications / Compatibility Product Precautions
      • Bently Nevada 330706-005-046-10-02-00 places an 11 mm sensing tip at the target through a metric reverse-mount arrangement. The probe, extension cable and Proximitor work together to measure static position and dynamic shaft vibration.
      Metric case: M10 x 1 reverse mount, 5 mm unthreaded length, 46 mm case length
      Electrical lead: 1.0 m with miniature ClickLoc connector
      Matched-system output: 3.94 V/mm nominal scale factor
      The metric reverse-mount case uses an M10 x 1 thread, a 5 mm unthreaded section and a 46 mm case length. A PPS tip is bonded to the AISI 304 stainless-steel body. Recommended reverse-mount case torque is 7.5 N·m, and the probe's operating-temperature range is -52 to +177 °C; that range does not establish the Proximitor's temperature limit.

      The 1.0 m FEP-insulated, 75-ohm triaxial lead terminates in a miniature ClickLoc connector. Its center-to-outer-conductor resistance is 5.9 ±0.5 ohms. A compatible 4 m or 8 m extension completes a 5 m or 9 m system; the probe, extension and 11 mm Proximitor must be selected as a matching electrical-length combination.

      In the matched system, the nominal scale factor is 3.94 V/mm and the linear range is 4 mm, approximately 0.5 to 4.5 mm of target gap. The standard performance setup uses a 2.5 mm gap, AISI 4140 steel target, -24 V DC supply and 10 kΩ load at 0 to +45 °C. Target material and geometry therefore form part of the measurement conditions, rather than being independent of the probe selection.
      Controller platform reference: Bently Nevada 3300 XL 11 mm system. Match cable length, target and Proximitor.
      Technical resources for Bently Nevada 330706-005-046-10-02-00 separate the original manufacturer reference from practical installation checks. Choose the manufacturer excerpt or the independent field guide below.
      The excerpt preserves original manufacturer pages. Use the Apter Power guide with the applicable manufacturer instructions and approved installation design.
      System and supply context: The listed item is the probe. A matching extension, 11 mm Proximitor and mounting hardware are required for the measurement system and are supplied only when itemized.

      Application scope: The application descriptions concern a complete calibrated chain. Target material, shaft diameter, clearance and installation temperature all affect suitability.
      Apply these checks to Bently Nevada 330706-005-046-10-02-00 and its installed system before returning it to service.
      Verify metric mounting

      Confirm M10 x 1 threads and the reverse case arrangement before fitting.

      Keep the cable intact

      Do not cut, splice or sharply bend the integral calibrated lead.

      Set a measured gap

      Check the actual transfer curve around the 2.5 mm nominal gap.

      Control case torque

      Use the reverse-mount recommendation; do not apply case torque to the connector.

      Assess adjacent metal

      Provide suitable target area and separation to avoid disturbed probe response.

      Test the full channel

      Verify DC position, dynamic response and monitor indication before releasing the machine.

      Alternative Names

      330706-005-046-10-02-00 Bently Nevada 330706-005-046-10-02-00 330706-005-046-10-02-00 Reverse Mount Probe

      Technical notes

      Configuration: M10 x 1 reverse mounting, fixed 5 mm / 46 mm case geometry, a 1 m lead and miniature clickloc connector.

      Integration: The listed item is the probe. A matching extension, 11 mm Proximitor and mounting hardware are required for the measurement system and are supplied only when itemized.

      Acceptance: Verify DC position, dynamic response and monitor indication before releasing the machine.

      Technical reference: Bently Nevada 3300 XL 11 mm Proximity Transducer System, 146256 Rev. T.

      FAQ View All FAQ

      • Which part of 330706-005-046-10-02-00 distinguishes it from an imperial reverse probe?
        The 330706 reverse-mount case uses an M10 x 1 metric thread and fixed 5 mm unthreaded / 46 mm case geometry. Do not install it into a 3/8-24 UNF mounting hole.
      • Which extension lengths pair with the 1 m lead of 330706-005-046-10-02-00?
        A matching 4 m extension makes a 5 m system, while a matching 8 m extension makes a 9 m system. Use the corresponding 3300 XL 11 mm Proximitor calibration.
      • Is the 3.94 V/mm output generated directly by 330706-005-046-10-02-00?
        No. That scale factor belongs to the complete probe, extension cable and Proximitor system. The probe must be connected to the matching conditioner.
      • Why does target material matter when setting 330706-005-046-10-02-00?
        The specified calibration uses AISI 4140 steel. Different conductivity or permeability can change the transfer curve, so verify the response against the actual target material.
      • What torque should be used on the reverse case of 330706-005-046-10-02-00?
        The recommended reverse-mount case torque is 7.5 N·m, with a maximum of 22.6 N·m. This is separate from the much lower connector tightening limit.
      • Can the lead of 330706-005-046-10-02-00 be shortened to remove slack?
        Keep the integral lead intact. Altering the cable changes the calibrated electrical system; route spare length without bending below the 25.4 mm minimum radius.
      • How should a small shaft be assessed for 330706-005-046-10-02-00?
        The specified system performance uses a minimum shaft diameter of 152 mm and a minimum flat target diameter of 30.5 mm. Smaller geometry requires application assessment and response verification.
      • Does the temperature limit of 330706-005-046-10-02-00 apply to its Proximitor?
        No. Probe and extension operation extends to +177 °C, while the Proximitor upper limit is +100 °C. Keep each component within its own temperature rating.
      Manufacturers

      Supporting new and legacy automation

      Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          PRODUCTS IN SEARCH PAGE ()
          50+ account managers available now
          Related reading

          Related cases and sourcing guidance

          View all case studies
          Manufacturers

          You May Also Like

          Explore related automation components available through Apter Power.
          Manufacturers

          Product Browsing History

          Revisit the products you recently viewed on Apter Power.
          SPEAK TO OUR TEAM
          Let’s find the right solution for you.
          Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.

          • Whatsapp: +86 18030235313

            Send us a message.

          • sales13@apterpower.com

            Complete our online form.

          • +86 18030235313

            Speak to our team in your native language.