Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330105-02-12-10-12-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330105-02-12-10-12-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330105-02-12-10-12-05
-
Estimated shipping dimensions:1.2x1x112cm
-
Weight:0.04 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Base part:330105 reverse-mount 3300 XL 8 mm probe
-
Fixed geometry code:02-12
-
Mounting thread:3/8-24 UNF
-
Total-length option:10 - 1.0 m (3.3 ft)
-
Connector and cable option:12 - Miniature ClickLoc coaxial connector, FluidLoc cable
-
Agency-approval option:05 - CSA, ATEX and IECEx
-
One-metre chain arrangement:Probe connected directly to a 1.0 m Proximitor Sensor; no extension cable
-
Nominal scale factor:7.87 V/mm (200 mV/mil)
-
Linear range:2 mm (80 mil)
-
Recommended radial-vibration gap:Approximately 1.27 mm (50 mil), -9 V DC
-
Standard-probe temperature range:-52 to +177 deg C (-62 to +350 deg F)
-
Calibration target basis:AISI 4140 steel
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330105-02-12-10-12-05 is the fixed 02-12 reverse-mount probe execution for a one-metre 3300 XL 8 mm proximity measurement chain.
- 3/8-24 UNF reverse-mount execution
- 1.0 m total probe length
- Miniature ClickLoc connector and FluidLoc cable
- CSA, ATEX and IECEx approval option
The one-metre probe connects directly to a matching one-metre 3300 XL Proximitor Sensor; the manufacturer states that one-metre systems do not use an extension cable. The probe, Proximitor Sensor, target material, static gap and monitor input remain one commissioned chain.
Important Notice: Verify the complete 330105-02-12-10-12-05 code. The 12 cable option is the FluidLoc execution, while 05 is the CSA/ATEX/IECEx approval selection; neither suffix may be replaced by the standard-cable or no-approval option.
Bently Nevada 330105-02-12-10-12-05 Manuals & Downloads
Bently Nevada 330105-02-12-10-12-05 Technical Reference (PDF)Bently Nevada 330105-02-12-10-12-05 Manufacturer Manual Excerpt (PDF)
The technical reference organizes exact characteristics and engineering boundaries. The manufacturer excerpt presents selected unchanged official pages used for exact-model review.
Reverse-mount bearing housings
Places the 3/8-24 UNF probe through the documented reverse-mount sleeve arrangement.
Relative shaft vibration
Measures dynamic shaft motion within the calibrated 3300 XL 8 mm chain.
Axial position monitoring
Uses the static gap signal to observe shaft position in the documented linear range.
Hazardous-area machinery channels
Retains the exact 05 approval selection when installed under the applicable control drawings.
Bently Nevada 330105-02-12-10-12-05 installation checks: retain the exact identity, installed configuration and witnessed acceptance record throughout the work.
1
Confirm the full 330105-02-12-10-12-05 marking before work.
2
Record the matching one-metre Proximitor Sensor and monitor-channel identity.
3
Place the monitored machine and protection channel in the approved maintenance state.
4
Protect the PPS probe tip, reverse-mount sleeve and 3/8-24 UNF thread from damage.
5
Keep the Miniature ClickLoc connector clean and tighten it only until the locking click is felt.
6
Route the 1.0 m FluidLoc lead without crushing it or applying persistent connector tension.
7
Set the mechanical gap within the documented 2 mm linear region against the actual target.
8
Prove polarity, scale, static position, dynamic response and monitor alarms before release.
Technical notes
Use 330105-02-12-10-12-05 only as the 1.0 m FluidLoc reverse-mount probe with Miniature ClickLoc connector and CSA, ATEX and IECEx approval selection. Match it directly to the documented 1.0 m Proximitor Sensor, then verify gap, polarity, 7.87 V/mm scale factor and monitor response.
FAQ View All FAQ
-
Which probe geometry is fixed by Bently Nevada 330105-02-12-10-12-05?It is the 330105 reverse-mount execution with the fixed 02-12 geometry and 3/8-24 UNF thread.
-
Which probe length is encoded by Bently Nevada 330105-02-12-10-12-05?The 10 option specifies a total probe length of 1.0 m, or 3.3 ft.
-
Which cable construction is selected for Bently Nevada 330105-02-12-10-12-05?The 12 option specifies a Miniature ClickLoc coaxial connector with FluidLoc cable.
-
Which approvals are selected for Bently Nevada 330105-02-12-10-12-05?The 05 suffix identifies the CSA, ATEX and IECEx approval option.
-
Does Bently Nevada 330105-02-12-10-12-05 require an extension cable?No. The manufacturer states that a one-metre system does not use an extension cable; the probe connects to the matching one-metre Proximitor Sensor.
-
Which scale factor applies to Bently Nevada 330105-02-12-10-12-05?The matched standard one-metre 3300 XL 8 mm system has a nominal 7.87 V/mm, or 200 mV/mil, scale factor.
-
Which linear range is documented for Bently Nevada 330105-02-12-10-12-05?The matched 3300 XL 8 mm system has a 2 mm, or 80 mil, linear range.
-
What completes commissioning of Bently Nevada 330105-02-12-10-12-05?Verify the exact chain identity, mechanical gap, polarity, scale, static position, dynamic response and every connected monitor alarm.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.