Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330104-01-05-50-02-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330104-01-05-50-02-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330104-01-05-50-02-00
-
Estimated shipping dimensions:2x1.5x112cm
-
Weight:0.14 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Mounting style:Forward mount
-
Probe thread:M10 x 1
-
Armor:Flexible stainless steel
-
Unthreaded length:10 mm
-
Overall case length:50 mm
-
Total length:5.0 m
-
Connector option:Standard ClickLoc without protector
-
Agency approval:None
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330104-01-05-50-02-00 is an armored M10 x 1 forward-mount 3300 XL 8 mm probe with 10 mm unthreaded length, 50 mm case and 5.0 m total length. It uses a standard ClickLoc connector without protector and specifies no agency approval.
- 5.0 m armored metric probe
- 10 mm unthreaded sensing end
- 50 mm forward-mount case
- API 670-compatible system family
Confirm the 10 mm smooth tip length and 50 mm case fit the mounting arrangement for 330104-01-05-50-02-00. Its 5 m lead must be matched to the documented 5 m Proximitor Sensor without changing the calibrated system length.
Important Notice: Confirm quotation scope, physical marking, included accessories and installed-system compatibility before work.
Apter Power 330104-01-05-50-02-00 Manuals and Guides
Apter Power 330104-01-05-50-02-00 Product Technical ReferenceBently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet 141194 Rev. AM
Important Notice: The first document is an Apter Power model-specific technical reference; the second link is the unmodified official manufacturer publication.
Fluid-film bearing vibration
Measures radial shaft vibration in a matched 3300 XL 8 mm loop.
Shaft position monitoring
Provides static position information within the published linear range.
Keyphasor channel
Supports phase-reference and speed measurement on suitable targets.
Long probe-lead retrofit
Connects directly in a documented 5 m system arrangement.
Read the applicable Bently Nevada documentation before work. Verify 330104-01-05-50-02-00 from the physical marking and the installed system record.
1
Verify 330104-01-05-50-02-00 and the final no-approval code.
2
Confirm the 10 mm unthreaded length and 50 mm case against the bracket and target.
3
Limit M10 x 1 thread engagement to 15 mm.
4
Use 11.2 N m recommended torque for the forward-mount probe.
5
Support the 5 m armored lead without crushing, twisting or sharp bends.
6
Protect the option-02 ClickLoc connector until mating.
7
Use the probe only with the matching 5 m 3300 XL 8 mm system components.
8
Verify gap voltage, polarity, frequency response and monitor-channel action before release.
Technical notes
Confirm the 10 mm smooth tip length and 50 mm case fit the mounting arrangement for 330104-01-05-50-02-00. Its 5 m lead must be matched to the documented 5 m Proximitor Sensor without changing the calibrated system length.
FAQ View All FAQ
-
Can an extension cable be added to the 5 m lead of 330104-01-05-50-02-00?Use the exact calibrated 5 m system arrangement; do not extend the total electrical length beyond the selected sensor system length.
-
What mounting geometry is encoded by 330104-01-05-50-02-00?It is a forward-mount M10 x 1 probe with 10 mm unthreaded length and a 50 mm case.
-
Which installation torque applies to 330104-01-05-50-02-00?The published recommended torque for a forward-mount M10 x 1 probe is 11.2 N m.
-
How should the five-metre armor on 330104-01-05-50-02-00 be restrained?Support the lead against pull, twist and crushing while maintaining the 25.4 mm minimum bend radius.
-
What nominal gap voltage is used for radial vibration with 330104-01-05-50-02-00?The published recommended radial-vibration gap is approximately -9 V, or 1.27 mm.
-
What target diameter is required for 330104-01-05-50-02-00?The minimum flat target diameter is 15.2 mm for the documented 4140-steel calibration.
-
Does 330104-01-05-50-02-00 carry hazardous-area approval?No. The final option 00 specifies no agency approval.
-
What system response should be verified for 330104-01-05-50-02-00?The matched 3300 XL 8 mm system is published for 0 to 10 kHz with the specified amplitude tolerance.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.