Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330104-00-06-10-01-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330104-00-06-10-01-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330104-00-06-10-01-05
-
Estimated shipping dimensions:32x30x2cm
-
Weight:0.2 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Unthreaded Length Option:0mm
-
Overall Case Length Option:60m
-
Total Length Option:1.0 meter (3.3 feet)
-
Connector and Cable-Type Option:Miniature coaxial ClickLoc connector with connector protector, standard cable
-
Agency Approval Option:CSA, ATEX, IECEx Approvals
-
Probe Cable Specifications:75Ω triaxial, fluoroethylene propylene (FEP) insulated probe cable in the following total probe lengths: 0.5, 1, 1.5, 2, 3, 5, or 9 meters.
Information
Overview
Manuals
Common Applications
Product Precautions
The 330104-00-06-10-01-05 The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements3.
- Superior Linearity
- Metric Standard Compatibility
- Environmental Ruggedness
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330104-00-06-10-01-05 3300 XL 8 mm Proximity Probes, Metric, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. Convenient on-site adjustment and maintenance
Oil & Gas
The industry environment is harsh and there is a risk of explosion. The -02/05 explosion-proof certification of 330104 is its core advantage. Booster stations on natural gas transmission pipelines. The probe monitors the stability of the rotor during high-speed operation to prevent cavitation or vibration-induced shutdowns.
Power Generation
Monitor the radial vibration of the generator rotor. By installing two probes at a 90° right angle (X/Y axes), the shaft center trajectory can be synthesized in real time to determine whether the rotor is balanced.
Steel & Metallurgy
Rolling mill gearbox, monitors the bearing condition of the high-speed shaft. Under heavy impact, the probe can detect an abnormal increase in bearing clearance.
Pulp & Paper / Pharma
Monitor vibration data in high-temperature and dry environments to ensure that the production line does not unexpectedly stop due to power equipment failures.
Naval Architecture and Ocean Engineering
Bentley 330104-00-06-10-01-05 is an 8mm eddy current vibration/displacement probe, which is a core sensor for critical shaft system safety monitoring in ship and offshore engineering. It is mainly used to monitor the operating condition of rotating equipment in real time, preventing major accidents such as failures, collisions, shaft breaks, and bearing damage.
Physical Installation and Thread Matching This is the step most prone to errors and is directly related to the probe's lifespan. Mixing threads is strictly prohibited. This model uses an M10 x 1 metric thread. It must never be forcibly screwed into an imperial hole (such as 3/8-24), otherwise the threads of the machine bearing housing will be damaged. The housing length of this model is 60 mm. Before installation, the hole depth must be measured to ensure that the probe can pass through the casing to reach the surface of the rotating shaft, leaving approximately 1.27 mm (50 mil) for adjustment. Verticality requirement: the probe must be perpendicular to the surface of the measured rotating shaft. If installed at an angle, the eddy current field will be distorted, resulting in a measured vibration reading that is too low.
FAQ View All FAQ
-
Is the thread specification in model 330104-00-06-10-01-05 in imperial or metric?330104 series is specially designed for metric installation environments. Before installation, the mounting holes on the machine must be verified. If they are mistakenly screwed into imperial threads (such as 3/8-24 UNF), it will cause thread damage or insecure installation.
-
330104-00-06-10-01-05 can it be used in combination with preamplifiers of the 7200 series or 3300 series (non-XL)?330104 belongs to the 3300 XL series. Although the appearance may be similar, the electrical characteristics (inductance/capacitance) of probes from different series are different. It must be used with a 3300 XL series preamplifier, otherwise the sensitivity (7.87 V/mm) will deviate significantly, rendering the monitoring data invalid.
-
The connector option for 330104-00-06-10-01-05 is '-01'. What should be noted during maintenance?Since there is no protective cover, the joint is directly exposed to the environment. In industrial sites with high oil, dust, or humidity, it is recommended that technicians use heat shrink tubing or self-adhesive insulating tape to seal the joint after connecting the extension cable, to prevent signal noise caused by oil entering the joint.
-
What is the legal/safety significance of the certification '-05' at the end of the model number for on-site installation of 330104-00-06-10-01-05?This means that the probe is of the 'intrinsically safe' design. In hazardous areas such as chemical plants or refineries (Zone 0/1/2), the probe can be legally installed in conjunction with the corresponding safety barriers to ensure that it will not generate energy that could cause fire or explosion under abnormal conditions.
-
When installing 330104-00-06-10-01-05, how do you determine the center point of the 'linear range' using voltage?The standard linear range of this probe is 2.0 mm (80 mil). Setting the voltage around $-10.0$ V (corresponding to a physical gap of about 1.27 mm) ensures that the signal remains linearly output in the range of -1.0 V to -17.0 V when the shaft undergoes radial vibration or displacement.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.