Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330104-00-04-90-02-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include 330104-00-04-90-02-00 and any revision or assembly number visible on the item. Keep the exact reference on your enquiry and quotation.
-
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered 330104-00-04-90-02-00 with the installed equipment and applicable Bently Nevada documentation.
Technical specifications for 330104-00-04-90-02-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330104-00-04-90-02-00
-
Weight:0.1 kg
-
Tariff Code:8537101190
-
Product family:3300 XL 8 mm
-
Probe design:330104 standard mount, armored
-
Sensing tip diameter:8 mm
-
Case thread:M10 x 1
-
Unthreaded length:0 mm, option 00
-
Overall case length:40 mm, option 04
-
Total length:9.0 m, option 90
-
Cable type:Standard cable, option 02
-
Connector:Miniature coaxial ClickLoc
-
Factory connector protector:Not included in option 02
-
Agency approval option:00 — not required
-
Probe tip material:Polyphenylene sulfide (PPS)
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- Bently Nevada 330104-00-04-90-02-00 senses the distance to a conductive target for rotating-machine vibration and position channels. The connected Proximitor Sensor converts the probe signal into a gap-related voltage.
Product type: Armored 8 mm proximity probe
Case configuration: M10 x 1; 40 mm overall case; 0 mm unthreaded length
Cable configuration: 9.0 m total length; standard cable; miniature ClickLoc connector
Case configuration: M10 x 1; 40 mm overall case; 0 mm unthreaded length
Cable configuration: 9.0 m total length; standard cable; miniature ClickLoc connector
The 330104 standard-mount design combines an 8 mm PPS sensing tip with a stainless-steel case and cable armor. For this order code, 00 selects zero unthreaded length, 04 selects a 40 mm overall case, and 90 selects a 9.0 m total length. The supplied shipping envelope is separate from the transducer cable-length code.
The 3300 XL 8 mm measurement chain uses a probe and a compatible Proximitor Sensor, with an extension cable where required by the selected system length. Its output follows distance to the conductive target and supports both static position and dynamic shaft motion. System calibration uses an AISI 4140 steel target by default; a different target material requires the appropriate calibration rather than an assumed scale.
Option 02 specifies standard cable and a miniature coaxial ClickLoc connector without a factory-installed connector protector. ClickLoc connections are tightened by hand until they click; connector protection remains important in the installation. The final 00 is the agency-approval selection, so hazardous-area approval must not be inferred from the general product-family description.
The 3300 XL 8 mm measurement chain uses a probe and a compatible Proximitor Sensor, with an extension cable where required by the selected system length. Its output follows distance to the conductive target and supports both static position and dynamic shaft motion. System calibration uses an AISI 4140 steel target by default; a different target material requires the appropriate calibration rather than an assumed scale.
Option 02 specifies standard cable and a miniature coaxial ClickLoc connector without a factory-installed connector protector. ClickLoc connections are tightened by hand until they click; connector protection remains important in the installation. The final 00 is the agency-approval selection, so hazardous-area approval must not be inferred from the general product-family description.
Controller platform reference: 3300 XL 8 mm. Match the installed configuration.
Technical downloads for 330104-00-04-90-02-00: an original Bently Nevada reference excerpt and an Apter Power installation planning guide.
-
Bently Nevada 330104-00-04-90-02-00 technical reference
Original Bently Nevada excerpt - PDF, 5 pages, 505.9 KB. Ordering options define this armored M10 x 1 probe. Performance values apply to a complete matched 3300 XL 8 mm system under its stated calibration conditions; approval option 00 does not select agency approvals. -
Bently Nevada 330104-00-04-90-02-00 installation planning guide
Prepared by Apter Power - PDF, 5 pages, 96.5 KB. Identity, configuration, connection and controlled acceptance planning.
Ordering options define this armored M10 x 1 probe. Performance values apply to a complete matched 3300 XL 8 mm system under its stated calibration conditions; approval option 00 does not select agency approvals. The planning guide is prepared by Apter Power; apply the complete manufacturer instructions and the stated applicability boundaries.
System and supply context: Ordering options define this armored M10 x 1 probe. Performance values apply to a complete matched 3300 XL 8 mm system under its stated calibration conditions; approval option 00 does not select agency approvals. Accessories are included only when itemized in the quotation.
Platform applications: The following applications describe 3300 XL 8 mm functions. Match the complete 330104-00-04-90-02-00 identity to the installed system before selecting a replacement.
Platform applications: The following applications describe 3300 XL 8 mm functions. Match the complete 330104-00-04-90-02-00 identity to the installed system before selecting a replacement.
-
Radial shaft vibration
Place the probe radially toward a conductive shaft and use a correctly configured transducer chain to observe shaft motion. -
Axial position channels
Use the gap-dependent signal for position measurement with a suitable conductive target and the specified calibration. -
Phase reference sensing
A suitable target feature and matched monitoring channel can provide a once-per-turn reference for machine analysis. -
Probe replacement planning
Match the installed arrangement to the M10 x 1 case, 40 mm case length and 9.0 m total length.
Prepare 330104-00-04-90-02-00 against the installed configuration and applicable Bently Nevada instructions. Plan isolation and the resulting interruption of system operation before replacement.
Match the thread
Confirm M10 x 1 mounting and the selected case reach before inserting the probe.
Preserve electrical length
Match the 9.0 m total-length selection to the intended Proximitor system.
Protect the connector
Option 02 has no factory-installed protector. Plan suitable protection for the actual environment.
Check target calibration
Use the correct calibration for the conductive target material and installed sensor chain.
Set the operating gap
Follow the applicable transducer and machine procedure; the shipping dimensions do not define the sensing gap.
Review the approval selection
Option 00 does not request agency approvals. Verify the complete approved installation before use in a hazardous area.
Alternative Names
330104-00-04-90-02-00
Bently Nevada 330104-00-04-90-02-00
Technical notes
Installation relationship: The 3300 XL 8 mm measurement chain uses a probe and a compatible Proximitor Sensor, with an extension cable where required by the selected system length. Its output follows distance to the conductive target and supports both static position and dynamic shaft motion. System calibration uses an AISI 4140 steel target by default; a different target material requires the appropriate calibration rather than an assumed scale.
Configuration: Ordering options define this armored M10 x 1 probe. Performance values apply to a complete matched 3300 XL 8 mm system under its stated calibration conditions; approval option 00 does not select agency approvals.
Technical reference: Bently Nevada 3300 XL 8 mm Proximity Transducer System, 141194 Rev. AN.
FAQ View All FAQ
-
What thread does 330104-00-04-90-02-00 use?The 330104 design uses an M10 x 1 threaded case and cable armor.
-
What case lengths are selected by 330104-00-04-90-02-00?The 00 unthreaded-length option is 0 mm and the 04 overall-case option is 40 mm.
-
What does the 90 option in 330104-00-04-90-02-00 specify?It selects a total length of 9.0 m. Match the complete transducer chain to the required electrical system length.
-
Which connector and cable are selected for 330104-00-04-90-02-00?Option 02 selects standard cable and a miniature coaxial ClickLoc connector without a factory-installed connector protector.
-
How is the ClickLoc connection on 330104-00-04-90-02-00 tightened?Tighten the connection by hand until it clicks. The locking design does not require installation tools.
-
Which target property affects calibration of 330104-00-04-90-02-00?The conductive target material affects the measurement response. Standard Proximitor calibration uses AISI 4140 steel; another material requires an appropriate calibration.
-
Does 330104-00-04-90-02-00 include an agency-approval selection?The final 00 selects agency approvals not required. Do not treat general family certifications as selected approvals for this order code.
-
Can 330104-00-04-90-02-00 alone produce the complete system output?The probe forms part of a transducer chain with a compatible Proximitor Sensor and any required extension cable. System performance and gap voltage belong to that complete arrangement.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.