Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6FX1113-4AD01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include 6FX1113-4AD01 and any revision or assembly number visible on the item. Keep the exact reference on your enquiry and quotation.
-
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered 6FX1113-4AD01 with the installed equipment and applicable Siemens documentation.
Technical specifications for 6FX1113-4AD01
-
Manufacturer:Siemens
-
Product Category:General Automation
-
Spare Part Number:6FX1113-4AD01
-
Weight:1.7 kg
-
Tariff Code:8537101190
-
System family:SINUMERIK 8
-
Main circuit designation:MS301-D
-
Additional PCB:MS340-A
-
Order configuration:Minimum 5 axes
-
Assembly role:Measuring circuit
-
Probe-interface context:MS301 X304.4 in the applicable 8MC arrangement
-
Configuration boundary:Installed control, software and machine wiring
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- Siemens 6FX1113-4AD01 forms part of the measuring and motion-interface arrangement in a configured SINUMERIK 8 system. The MS301-D and MS340-A identities must be retained together when matching the offered assembly.
Product type: Measuring-circuit assembly
Main board: MS301-D
Additional board: MS340-A; minimum five-axis configuration
Main board: MS301-D
Additional board: MS340-A; minimum five-axis configuration
The 6FX1113-4AD01 order configuration combines the MS301-D measuring circuit with the additional MS340-A PCB for a minimum of five axes. This identifies the intended assembly configuration rather than an independently programmable complete CNC. The installed axis allocation, measuring equipment and machine wiring remain part of the host system.
System 8 interface functions connect numerical control, interface control and machine signals. In the applicable 8MC arrangement, the MS301 family includes the fast measuring-probe input at X304.4; its response depends on the configured probe-enable signal. Treat that reference as an installation-specific connection, and confirm the actual assembly revision and machine diagram before use.
System 8 operating functions and machining cycles depend on the matching control software and stored programs. Cycle functions are held in program memory, with availability differing between control variants. Replacement of the measuring-circuit assembly therefore requires preservation of the axis and machine-data configuration, followed by controlled checks of feedback, reference behavior and the applicable probe or handwheel arrangement.
System 8 interface functions connect numerical control, interface control and machine signals. In the applicable 8MC arrangement, the MS301 family includes the fast measuring-probe input at X304.4; its response depends on the configured probe-enable signal. Treat that reference as an installation-specific connection, and confirm the actual assembly revision and machine diagram before use.
System 8 operating functions and machining cycles depend on the matching control software and stored programs. Cycle functions are held in program memory, with availability differing between control variants. Replacement of the measuring-circuit assembly therefore requires preservation of the axis and machine-data configuration, followed by controlled checks of feedback, reference behavior and the applicable probe or handwheel arrangement.
Controller platform reference: SINUMERIK System 8. Match the installed configuration before replacement.
Technical downloads for 6FX1113-4AD01: an original Siemens reference excerpt and an Apter Power installation planning guide.
-
Siemens 6FX1113-4AD01 technical reference
Original Siemens excerpt - PDF, 4 pages, 148.5 KB. The exact order configuration is MS301-D with MS340-A for a minimum of five axes. System functions depend on the installed control and software; platform values are not standalone board ratings. -
Siemens 6FX1113-4AD01 installation planning guide
Prepared by Apter Power - PDF, 5 pages, 96.3 KB. Identity, configuration, connection and controlled acceptance planning.
The exact order configuration is MS301-D with MS340-A for a minimum of five axes. System functions depend on the installed control and software; platform values are not standalone board ratings. The planning guide is prepared by Apter Power; apply the complete manufacturer instructions and the stated applicability boundaries.
System and supply context: The exact order configuration is MS301-D with MS340-A for a minimum of five axes. System functions depend on the installed control and software; platform values are not standalone board ratings. Accessories are included only when itemized in the quotation.
Platform applications: The following applications describe SINUMERIK System 8 functions. Match the complete 6FX1113-4AD01 identity to the installed system before selecting a replacement.
Platform applications: The following applications describe SINUMERIK System 8 functions. Match the complete 6FX1113-4AD01 identity to the installed system before selecting a replacement.
-
Measuring-circuit maintenance
Retain the MS301-D and MS340-A combination when checking the existing assembly. -
Axis configuration continuity
Preserve installed axis allocation and machine data through the replacement procedure. -
Probe-interface review
Check the applicable probe input, enable condition and machine wiring before commissioning. -
Feedback verification
Confirm the actual measuring and reference behavior under controlled machine conditions.
Prepare 6FX1113-4AD01 against the installed configuration and applicable Siemens instructions. Plan isolation and the resulting interruption of system operation before replacement.
Isolate machine motion
Place all axes in a safe state and isolate the control before handling the assembly.
Match both boards
Verify MS301-D and MS340-A markings together with the full order code.
Retain axis data
Back up and preserve the installed axis and machine-data configuration.
Verify feedback wiring
Record measuring-system connections and their assignments before removal.
Apply the exact diagram
Do not transfer a platform connector reference to a different assembly revision without verification.
Test under control
Check feedback, referencing and applicable probe functions before restoring normal motion.
Alternative Names
6FX1113-4AD01
Siemens 6FX1113-4AD01
Technical notes
Installation relationship: System 8 interface functions connect numerical control, interface control and machine signals. In the applicable 8MC arrangement, the MS301 family includes the fast measuring-probe input at X304.4; its response depends on the configured probe-enable signal. Treat that reference as an installation-specific connection, and confirm the actual assembly revision and machine diagram before use.
Configuration: The exact order configuration is MS301-D with MS340-A for a minimum of five axes. System functions depend on the installed control and software; platform values are not standalone board ratings.
Technical reference: Siemens 6FX1113-4AD01 product identification; SINUMERIK System 8 interface description, Part 2, Edition 04.84; System 8 programming instructions, Part 2, Edition 12.83.
FAQ View All FAQ
-
Which measuring-circuit board is identified by 6FX1113-4AD01?The exact order code identifies MS301-D in the SINUMERIK 8 system.
-
Which additional PCB belongs to the order configuration of 6FX1113-4AD01?The configuration includes the additional MS340-A PCB. Verify both board identities on the offered assembly.
-
What axis configuration is identified for 6FX1113-4AD01?The order definition is for a minimum of five axes. It does not specify the number of axes actually installed or enabled on a particular machine.
-
Is 6FX1113-4AD01 a complete CNC controller?No. It is a measuring-circuit assembly within the configured SINUMERIK 8 control arrangement.
-
Where is the MS301 probe input associated with 6FX1113-4AD01?The applicable 8MC interface description places the fast measuring-probe input at X304.4. Confirm the actual revision and machine drawing before applying this connection.
-
Is the probe input associated with 6FX1113-4AD01 always active?No. In the applicable system arrangement, response depends on the configured probe-enable signal.
-
Does 6FX1113-4AD01 determine the installed System 8 cycle package?No. Machining cycles are stored in control program memory and depend on the installed control and software configuration.
-
What configuration should be retained when replacing 6FX1113-4AD01?Preserve axis allocation, machine data and measuring-system connections, then check feedback and reference behavior under controlled conditions.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.