Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330103-02-08-10-02-CN
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330103-02-08-10-02-CN
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330103-02-08-10-02-CN
-
Estimated shipping dimensions:1.8×1.6×113cm
-
Weight:0.05 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe family:3300 XL 8 mm
-
Mounting thread:M10 x 1
-
Armor:Without armor
-
Unthreaded length:20 mm
-
Overall case length:80 mm
-
Total probe length:1.0 m
-
Connector:Miniature coaxial ClickLoc, no connector protector
-
Cable:Standard cable
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330103-02-08-10-02-CN provides a compact metric probe geometry for a matched 3300 XL 8 mm proximity-transducer channel.
- Uses the metric M10 x 1 case defined for the 330103 probe family.
- Combines 20 mm of unthreaded length with an 80 mm overall case.
- Carries a 1.0 m standard lead terminated by a miniature ClickLoc connector.
- Works only as part of a matched 3300 XL 8 mm probe, cable and Proximitor system.
The short unthreaded section and longer case support controlled reach while retaining sufficient threaded engagement. Final acceptance depends on the matched electrical length and verified gap response.
Important Notice: Match the complete 330103-02-08-10-02-CN marking before removing the installed probe. Verify proportional voltage response, polarity and channel indication before returning the machine to service.
Bently Nevada 330103-02-08-10-02-CN Manuals & Downloads
Bently Nevada 330103-02-08-10-02-CN Official Technical Reference Excerpt (PDF)Bently Nevada 330103-02-08-10-02-CN Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Shaft-relative vibration
Uses the installed probe position to observe dynamic shaft motion in bearing and shaft monitoring locations.
Static position
Supports non-contact measurement of shaft position inside the calibrated transducer-system range.
Machine protection input
Feeds the matched Proximitor sensor and monitoring channel used for alarms and protection logic.
Commissioning verification
Allows gap, signal response and channel direction to be checked after installation.
Before installing Bently Nevada 330103-02-08-10-02-CN, confirm the documented system, interfaces and controlled configuration.
1
Match the complete 330103-02-08-10-02-CN marking before removing the installed probe.
2
Confirm the mounting interface is M10 x 1 and that the case provides adequate thread engagement.
3
Keep the probe, extension cable and Proximitor sensor at the documented selected electrical length.
4
Protect the probe tip, coaxial lead and ClickLoc connector from impact, contamination and sharp bends.
5
Route the lead away from hot surfaces, rotating parts and locations that can crush or abrade the cable.
6
Use the connector protector only when it is included in the complete ordering code.
7
Set the probe gap with the matched system and the controlled target material before enabling protection.
8
Verify proportional voltage response, polarity and channel indication before returning the machine to service.
Technical notes
Match the complete 330103-02-08-10-02-CN marking before removing the installed probe. Verify proportional voltage response, polarity and channel indication before returning the machine to service.
FAQ View All FAQ
-
How much of the case is unthreaded on 330103-02-08-10-02-CN?The 02 option specifies 20 mm of unthreaded length.
-
What overall case length is encoded in 330103-02-08-10-02-CN?The 08 option specifies an 80 mm case.
-
Does 330103-02-08-10-02-CN include probe armor?No. The 330103 family is the M10 x 1 standard-mount execution without armor.
-
Which connector arrangement is selected for 330103-02-08-10-02-CN?Code 02 selects the miniature coaxial ClickLoc connector without a connector protector.
-
What length does segment 10 contribute to the signal chain of 330103-02-08-10-02-CN?Code 10 identifies a 1.0 m total probe length.
-
What mating thread must accept 330103-02-08-10-02-CN?The probe case uses an M10 x 1 mounting thread.
-
How should the electrical chain be completed for 330103-02-08-10-02-CN?Use a matched 3300 XL 8 mm Proximitor system whose probe and extension-cable lengths equal the selected system length.
-
Which commissioning result confirms 330103-02-08-10-02-CN is positioned correctly?A controlled gap change should produce the expected proportional channel response without connector, polarity or diagnostic faults.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.