Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330180-X1-05 MOD:145004-75
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330180-X1-05 MOD:145004-75
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330180-X1-05 MOD:145004-75
-
Estimated shipping dimensions:8.8x3.4x7cm
-
Weight:0.22 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Sensor family:3300 XL 8 mm Proximitor
-
Measurement principle:Eddy-current signal conditioning
-
Approval option:05, multiple approvals
-
Matched system sensitivity:7.87 V/mm (200 mV/mil) ±5%
-
Matched linear range:2.0 mm (80 mil)
-
Frequency response:0 to 10 kHz, complete system
-
Required chain:Probe, extension cable and Proximitor sensor
-
Configuration control:X1 and MOD 145004-75 retained
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330180-X1-05 MOD:145004-75 converts the matched 3300 XL 8 mm probe response into the proportional voltage used by the receiving monitor.
- Conditions the eddy-current probe signal for the receiving monitor.
- Belongs to the 3300 XL 8 mm matched transducer system.
- Uses the multiple-approval execution selected by the final 05 field.
- Retains the X1 and MOD code as the complete modified-sensor identity.
System performance depends on the exact probe and cable electrical length connected to the Proximitor sensor. Power, common, output and shield conductors must return to the correct monitor terminals.
Important Notice: Confirm the probe and extension-cable lengths required by the connected 3300 XL 8 mm system. Verify signal polarity, scale and dynamic response across the complete chain.
Bently Nevada 330180-X1-05 MOD:145004-75 Manuals & Downloads
Bently Nevada 330180-X1-05 MOD:145004-75 Official Technical Reference Excerpt (PDF)Bently Nevada 330180-X1-05 MOD:145004-75 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Radial vibration channels
Supplies the conditioned voltage used for shaft-relative vibration measurement.
Axial position monitoring
Provides a proportional static signal for shaft-position or thrust channels.
Machine protection systems
Interfaces the proximity transducer with alarms and protection logic.
Modified sensor replacement
Restores an installed X1/MOD execution when the complete identifier and wiring match.
Before installing Bently Nevada 330180-X1-05 MOD:145004-75, confirm the documented system, interfaces and controlled configuration.
1
Match 330180-X1-05 MOD:145004-75 character for character before disconnecting the installed sensor.
2
Confirm the probe and extension-cable lengths required by the connected 3300 XL 8 mm system.
3
Identify power, common, output and shield conductors before moving wiring.
4
Do not assign an unsupported mounting meaning to the X1 field.
5
Mount the Proximitor sensor on a clean surface with adequate clearance and cable strain relief.
6
Keep probe and extension-cable connectors clean and fully engaged.
7
Check supply voltage and static output before enabling the monitor channel.
8
Verify signal polarity, scale and dynamic response across the complete chain.
Technical notes
Confirm the probe and extension-cable lengths required by the connected 3300 XL 8 mm system. Verify signal polarity, scale and dynamic response across the complete chain.
FAQ View All FAQ
-
What function does 330180-X1-05 MOD:145004-75 perform in the 3300 XL chain?It conditions the 8 mm probe signal and supplies the proportional output used by the monitor.
-
Which sensing system must be matched to 330180-X1-05 MOD:145004-75?Use a 3300 XL 8 mm probe and extension cable that provide the required total electrical length.
-
Does terminal 05 place 330180-X1-05 MOD:145004-75 in the multiple-approval execution?Yes. The terminal 05 field identifies the multiple-approval execution.
-
Why can X1 on 330180-X1-05 MOD:145004-75 not be normalized to a standard length code?Keep X1 in the complete identifier and confirm the installed mounting execution without substituting a standard code.
-
Does MOD:145004-75 change the replacement process for 330180-X1-05 MOD:145004-75?Yes. The modification number must match the installed sensor and project record before replacement.
-
What complete-system sensitivity is associated with 330180-X1-05 MOD:145004-75?A matched 3300 XL 8 mm system has a nominal sensitivity of 7.87 V/mm (200 mV/mil), subject to the documented tolerance.
-
Which conductors should be identified before removing 330180-X1-05 MOD:145004-75?Record the power, common, output and shield terminations at both the sensor and receiving monitor.
-
How is a newly installed 330180-X1-05 MOD:145004-75 accepted?Confirm supply voltage, stable gap output, correct polarity and proportional dynamic response at the monitor.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.