Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330103-02-04-10-02-CN
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330103-02-04-10-02-CN
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330103-02-04-10-02-CN
-
Estimated shipping dimensions:1.8×1.6×113cm
-
Weight:0.05 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe family:3300 XL 8 mm
-
Case thread:M10 x 1
-
Case construction:Standard mount, without armor
-
Unthreaded section:20 mm
-
Case length:40 mm
-
Lead length:1.0 m
-
Termination:ClickLoc connector without protector
-
Lead type:Standard cable
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330103-02-04-10-02-CN supplies the shorter 40 mm metric case execution for non-contact shaft vibration and position sensing.
- Uses the 330103 metric probe body without stainless-steel armor.
- Pairs a 20 mm unthreaded section with a 40 mm case for compact mounting.
- Provides a 1.0 m standard coaxial lead for the selected system arrangement.
- Terminates with the code-02 ClickLoc connection without a protector.
This execution leaves 20 mm of threaded case behind the unthreaded section. Mounting hardware and probe gap must preserve the intended sensing position and system response.
Important Notice: Match the complete 330103-02-04-10-02-CN marking before removing the installed probe. Verify proportional voltage response, polarity and channel indication before returning the machine to service.
Bently Nevada 330103-02-04-10-02-CN Manuals & Downloads
Bently Nevada 330103-02-04-10-02-CN Official Technical Reference Excerpt (PDF)Bently Nevada 330103-02-04-10-02-CN Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Shaft-relative vibration
Uses the installed probe position to observe dynamic shaft motion in compact metric probe installations.
Static position
Supports non-contact measurement of shaft position inside the calibrated transducer-system range.
Machine protection input
Feeds the matched Proximitor sensor and monitoring channel used for alarms and protection logic.
Commissioning verification
Allows gap, signal response and channel direction to be checked after installation.
Before installing Bently Nevada 330103-02-04-10-02-CN, confirm the documented system, interfaces and controlled configuration.
1
Match the complete 330103-02-04-10-02-CN marking before removing the installed probe.
2
Confirm the mounting interface is M10 x 1 and that the case provides adequate thread engagement.
3
Keep the probe, extension cable and Proximitor sensor at the documented selected electrical length.
4
Protect the probe tip, coaxial lead and ClickLoc connector from impact, contamination and sharp bends.
5
Route the lead away from hot surfaces, rotating parts and locations that can crush or abrade the cable.
6
Use the connector protector only when it is included in the complete ordering code.
7
Set the probe gap with the matched system and the controlled target material before enabling protection.
8
Verify proportional voltage response, polarity and channel indication before returning the machine to service.
Technical notes
Match the complete 330103-02-04-10-02-CN marking before removing the installed probe. Verify proportional voltage response, polarity and channel indication before returning the machine to service.
FAQ View All FAQ
-
Why is the 04 case option significant on 330103-02-04-10-02-CN?It specifies a 40 mm overall case, producing a compact metric probe body.
-
What threaded engagement remains after the unthreaded section on 330103-02-04-10-02-CN?The ordering string specifies a 40 mm case and a 20 mm unthreaded section; the installation must use the remaining threaded portion correctly.
-
Which probe family must be used with 330103-02-04-10-02-CN?It belongs to the 3300 XL 8 mm transducer system and must stay with matched 8 mm components.
-
Is a connector protector supplied by the 02 option in 330103-02-04-10-02-CN?No. Code 02 is the miniature coaxial ClickLoc connector without the protector.
-
What lead construction is built into 330103-02-04-10-02-CN?It uses a 1.0 m standard cable lead.
-
Where is 330103-02-04-10-02-CN normally applied?It is used for non-contact shaft-relative vibration or static position measurements at a compatible M10 x 1 mounting point.
-
What should be checked before tightening 330103-02-04-10-02-CN?Confirm thread condition, insertion depth, clearance to the target and safe lead routing before applying the approved mounting torque.
-
How is the restored channel for 330103-02-04-10-02-CN accepted?Verify gap voltage, response direction, dynamic indication and the absence of system or connector faults.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.