With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330103-00-03-15-01-CN is an eddy current sensor probe belonging to Bently Nevada's 3300 series. It is typically used in conjunction with the 3300 XL preamplifier for continuous monitoring of vibration and shaft displacement in rotating machinery.
Micro-Level Precision
100% Interchangeable
Heavy-Duty PPS Tip
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components. Each 3300 XL 8 mm Transducer System component is backward-compatible and interchangeable with other non-XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330103-00-03-15-01-CN Proximity Probes Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
Monitors the bearing health and rotor alignment of high-pressure water injection pumps and oil gathering pumps on onshore oilfields.
Liquefied Natural Gas
Provides high-precision vibration monitoring for cryogenic BOG (boil-off gas) compressors operating in ultra-low ambient temperatures.
Thermal Power
Measures thermal expansion, eccentricity, and shaft position of large steam turbines and generators to prevent stator-rotor friction.
Nuclear Power
Provides certified, high-reliability machinery protection for main feedwater pumps and cooling water circulation pumps on the conventional island.
Pharmaceutical
Monitors the drive shafts of large industrial centrifuges used in sterile, hazardous solvent extraction lines.
Iron & Steel
Monitors the heavy-duty rotor vibrations of blast furnace blowers and large dust extraction fans under intense heat and mechanical shock.
When using the 330103-00-03-15-01-CN probe, always follow these critical guidelines. Precisely calibrate the probe gap voltage (typically targeting around -10 Vdc) during setup to prevent the tip from colliding with the shaft. Keep the cable bend radius above 25.4 mm and ensure the ClickLoc connector is clean, dry, and oil-proof. Lastly, this -CN certified model must be wired into loops that comply with local China hazardous area regulations (NEPSI/CCC Ex), with the shielding grounded at the monitor rack end only to avoid signal noise.
It is a Bently Nevada 3300 XL 8 mm Proximity Probe with a 3/8-24 UNF threaded body, designed for non-contacting machinery displacement and vibration monitoring, featuring China-specific hazardous area approvals.
How to use the 330103-00-03-15-01-CN?
Thread the probe body into the machine housing or a mounting bracket, adjust the gap distance using a multimeter to set the proper bias voltage, and connect its cable to a 3300 XL extension cable and Proximitor sensor.
What parameters does the 330103-00-03-15-01-CN help measure?
When paired with the 3300 XL system, it measures dynamic shaft radial vibration, static axial thrust position, eccentricity, and keyphasor speed.
What is the linear range of the 330103-00-03-15-01-CN?
It features a standard 80 mils (2.0 mm) linear measuring range, starting at a gap of approximately 10 mils (0.25 mm) from the target.
What monitoring systems support the 330103-00-03-15-01-CN?
It is fully compatible with Bently Nevada 3500, 3300, and Orbit 60 machinery protection and monitoring systems.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
