Which Bently Nevada components must be matched with 330101-00-60-90-01-05?

Use 330101-00-60-90-01-05 only with the documented 3300 XL 8 mm Proximity Transducer System arrangement, including Nine-metre 3300 XL Proximitor Sensor, AISI 4140 target, Probe mounting bracket.

How should the complete 330101-00-60-90-01-05 order code be checked before installation?

Compare every suffix with the nameplate and the controlling 141194 Rev. AM ordering table; the documented probe model is 330101.

Can 330101-00-60-90-01-05 directly replace another Bently Nevada part number?

Do not assume direct substitution. Match the complete 330101-00-60-90-01-05 code, mechanical interface, cable or housing configuration, system length and approved monitoring-channel arrangement.

Bently Nevada 330101-00-60-90-01-05 3300 XL 8 mm 3/8-24 UNF proximity probe

Name: 330101-00-60-90-01-05
Brand: Bently Nevada
SKU: 330101-00-60-90-01-05

330101-00-60-90-01-05

3300 XL 8 mm 3/8-24 UNF proximity probe

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 330101-00-60-90-01-05

Manufacturer:

Bently Nevada

Product Category:

Machinery Monitoring System

Spare Part Number:

330101-00-60-90-01-05

Estimated shipping dimensions:

1.5x1.3x116cm

Weight:

0.05 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Probe model:

330101

Probe thread:

3/8-24 UNF

Armor:

Unthreaded length:

0.0 in

Overall case length:

6.0 in

Total probe length:

9.0 m (29.5 ft)

Connector:

Miniature coaxial ClickLoc with protector

Probe cable:

Standard

Agency approval option:

CSA, ATEX and IECEx

Probe DC resistance:

9.87 +/-0.50 Ohm

Power without barriers:

-17.5 to -26 V DC; 12 mA maximum

Power with barriers:

-23 to -26 V DC

Supply sensitivity:

<2 mV/V

Output resistance:

50 Ohm

Field-wire conductor range:

0.2 to 1.5 mm2 (16 to 24 AWG)

Maximum field-wire length:

305 m (1000 ft)

Linear range:

2.0 mm (80 mils)

Linear-range limits:

0.25 to 2.30 mm (10 to 90 mils)

Recommended radial-vibration gap:

-9 V DC; approximately 1.27 mm (50 mils)

Incremental scale factor:

7.87 V/mm (200 mV/mil)

Frequency response:

0 to 10 kHz; +0/-3 dB

Extension-cable capacitance:

69.9 pF/m typical

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 330101-00-60-90-01-05 is 3300 xl 8 mm 3/8-24 unf proximity probe. It senses shaft-relative displacement and carries the probe signal over a nine-metre lead to the matched 3300 XL monitoring channel.

Uses a 6.0 in 3/8-24 UNF case
Provides a long 9.0 m standard probe lead
Protects the miniature ClickLoc connector
Carries the documented multiple-approval suffix

330101-00-60-90-01-05 operates with Nine-metre 3300 XL Proximitor Sensor, AISI 4140 target, Probe mounting bracket, Compatible machinery monitor.

Engineered applications include Remote radial vibration point, Long-route axial position loop, Shaft centerline measurement, Approved-area probe replacement.

Important Notice: Confirm the nine-metre Proximitor Sensor configuration, 6.0 in case, connector protector and approval marking before installation and gap verification.

Apter Power 330101-00-60-90-01-05 Manuals and Guides

Apter Power 330101-00-60-90-01-05 Product Technical Reference PDF Bently Nevada 330101-00-60-90-01-05 Official System Manual PDF

The first document is a model-specific technical reference. The second is the directly related Bently Nevada system document used for installation and engineering verification.

Remote radial vibration point

Connects a remote bearing measurement to the monitor cabinet.

Long-route axial position loop

Measures thrust movement where the long probe lead is required.

Shaft centerline measurement

Supports shaft centerline trending without a separate extension cable.

Approved-area probe replacement

Restores the documented long-lead approved probe configuration.

Read the applicable Bently Nevada installation instructions before work. Verify 330101-00-60-90-01-05 and the installed 3300 XL 8 mm Proximity Transducer System configuration.

Verify the complete 330101-00-60-90-01-05 marking, 3/8-24 UNF unarmored construction and assigned measuring point before work.

Place the monitored machine and its protection channel in the approved maintenance state before disturbing the probe.

Protect the probe tip and 3/8-24 UNF unarmored interface from impact, burrs, contamination and unintended side-view metal.

Route and support the 9.0 m probe lead without sharp bends, crushing, tensile load or contact with hot and moving surfaces.

Keep every ClickLoc interface clean, dry and fully engaged; preserve connector-protector hardware where supplied.

Confirm the matched 3300 XL 8 mm Proximitor Sensor, total system length and target material before setting the static gap.

Maintain the documented probe-tip separation where adjacent channels could create cross-talk.

Prove gap voltage, polarity, dynamic response and alarm action before returning the protection channel to service.

FAQS

What exact system function does 330101-00-60-90-01-05 provide?

330101-00-60-90-01-05 is 3300 xl 8 mm 3/8-24 unf proximity probe. It senses shaft-relative displacement and carries the probe signal over a nine-metre lead to the matched 3300 XL monitoring channel.
Which Bently Nevada components must be matched with 330101-00-60-90-01-05?

Use 330101-00-60-90-01-05 only with the documented 3300 XL 8 mm Proximity Transducer System arrangement, including Nine-metre 3300 XL Proximitor Sensor, AISI 4140 target, Probe mounting bracket.
How should the complete 330101-00-60-90-01-05 order code be checked before installation?

Compare every suffix with the nameplate and the controlling 141194 Rev. AM ordering table; the documented probe model is 330101.
What installation detail is critical for 330101-00-60-90-01-05?

Protect the probe tip and 3/8-24 UNF unarmored interface from impact, burrs, contamination and unintended side-view metal.
What wiring or connector checks are required for 330101-00-60-90-01-05?

Route and support the 9.0 m probe lead without sharp bends, crushing, tensile load or contact with hot and moving surfaces.
How should 330101-00-60-90-01-05 be configured with its monitoring channel?

Confirm the matched 3300 XL 8 mm Proximitor Sensor, total system length and target material before setting the static gap.
What commissioning test should be performed after installing 330101-00-60-90-01-05?

Prove gap voltage, polarity, dynamic response and alarm action before returning the protection channel to service.
Can 330101-00-60-90-01-05 directly replace another Bently Nevada part number?

Do not assume direct substitution. Match the complete 330101-00-60-90-01-05 code, mechanical interface, cable or housing configuration, system length and approved monitoring-channel arrangement.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

330101-00-60-90-01-05

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 330101-00-60-90-01-05

Technical specifications for 330101-00-60-90-01-05

Information

Information