With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330101-00-16-10-01-05 is an eddy current proximity probe belonging to the 3300 XL 8 mm series, mainly used for measuring the vibration, displacement, and rotational speed of rotating machinery.
One 3300 XL 8 mm probe
One 3300 XL extension cable
One 3300 XL Proximitor Sensor
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability.
All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components. Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable with other non XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330101-00-16-10-01-05 Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
Used in catalytic cracking units and oil transport pumps to monitor shaft vibration, preventing catastrophic oil or gas leaks.
Thermal & Nuclear Power
Installed on fluid-film bearings of large generators to measure shaft vibration and axial displacement, ensuring power grid stability.
Hydroelectric Power
Measures shaft runout and swing on vertical or horizontal hydro turbines to monitor the mechanical impact of water flow.
Steel & Metallurgical Industry
Monitors high-power blowers and exhaust fans to prevent catastrophic failures caused by rotor unbalance due to dust accumulation.
Pulp & Paper Industry
Measures micro-level axial displacement in pulp refiners to prevent unexpected downtime and expensive paper material waste.
Pharmaceutical
Monitors material unbalance during separation in volatile solvent environments, fully utilizing its hazardous area safety certifications.
When using the 330101-00-16-10-01-05 probe, special care must be taken with its fully threaded case by avoiding over-tightening (max torque 13.5 N·m) to prevent tip damage, while monitoring voltage to set the initial gap precisely within its 2.0 mm linear range (typically -10 Vdc).
This 1.0-meter probe must match a 4m or 8m extension cable to maintain the exact 5m or 9m total system length and prevent calibration errors. Furthermore, the ClickLoc connector must be sealed against moisture and oil, the cable bend radius must be kept above 25.4 mm, and all maintenance in hazardous areas must strictly comply with its 05 Agency Approvals for safety and grounding.
The system utilizes the Bently Nevada 3300 XL 8 mm Proximity Probe (Model: 330101-00-16-10-01-05) to deliver an output voltage directly proportional to the distance between the probe tip and the observed conductive surface. It is capable of measuring both static (position) and dynamic (vibration) values.This specific configuration features a 3/8-24 UNF thread with a 0.0-inch unthreaded length and a 1.6-inch overall case length. It comes with a 1.0-meter standard cable and a ClickLoc™ miniature coaxial connector (without armor). Additionally, it complies with Multiple Agency Approvals (05) for hazardous area safety. The system’s primary applications include vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
It is an industrial-grade non-contact eddy current proximity probe belonging to the Bently Nevada 3300 XL 8mm Transducer System, primarily used to measure microscopic vibration and displacement of rotating machinery shafts.
What is the working principle of the 330101-00-16-10-01-05?
It operates on the eddy current principle. The probe tip emits a high-frequency electromagnetic field. When a conductive metal target approaches, eddy currents are induced, changing the coil's impedance. This change is converted into a voltage signal linearly proportional to the gap distance.
How do you properly use and install the 330101-00-16-10-01-05 probe?
It is threaded into a mounting bracket on the machine's bearing housing. Installers must monitor the raw "gap voltage" (static bias voltage) using a voltmeter and lock it into place once adjusted to the linear midpoint (typically around -10 Vdc).
Are the physical materials of the 330101-00-16-10-01-05 corrosion and oil resistant?
Yes. The probe tip is made of Polyphenylene Sulfide (PPS) engineering plastic, and the case is AISI 304 Stainless Steel, providing excellent resistance to industrial lubricants, moisture, and chemical splashes.
Does the cable of the 330101-00-16-10-01-05 probe have protective armored shielding?
Based on the specific part nomenclature (where 330101 indicates unarmored), this specific unit is without metal armour. If the cable is highly exposed to mechanical cutting or heavy abrasion risk, a 330102 armored option is recommended.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
