About Us Contact Us
 
  • Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      +86 18030235313 sales13@apterpower.com Fast Quote
      About Us Contact Us +86 18030235313 sales13@apterpower.com Fast Quote
      Get Parts Quote
      Name
      Company *
      Phone *
      Email *
      Address
      City
      State / Province / Region
      Zipcode
      Country
      Quantity *
      Part Number *
      Manufacturer
      Preferred Condition
      Additional Information
      Cancel

      330101-00-08-05-02-00

      3300 XL 8 mm Proximity Probe
      In Stock
      Ships by Tuesday, September 22
      Fast Shipping Available

      Product Describe：

      Bently Nevada 330101-00-08-05-02-00 is an unarmored, 3/8-24 UNF threaded 3300 XL 8 mm proximity probe with a 0.8 in fully threaded case, 0.5 m standard cable and miniature coaxial ClickLoc connector. In a matched 3300 XL 8 mm Proximity Transducer System, it supports non-contact shaft position, vibration, Keyphasor reference and speed measurement on fluid-film bearing machinery.

      Ask our team:

      Get a quick price for： 330101-00-08-05-02-00
      Quantity*
      Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
      Get a Quote
      For more information on how your data is processed and stored by Apterpower please read our privacy policy.
      Technical specifications Information Alternative names Technical notes FAQ

      Technical specifications for 330101-00-08-05-02-00

      Technical specifications for 330101-00-08-05-02-00

      • Manufacturer:
        Bently Nevada
      • Product Category:
        Machinery Monitoring System
      • Spare Part Number:
        330101-00-08-05-02-00
      • Estimated shipping dimensions:
        1.5x1.2x58cm
      • Weight:
        0.04 kg
      • Tariff Code:
        8537101190
      • Counliy of origin:
        USA
      • Probe type:
        3300 XL 8 mm proximity probe
      • Mounting style:
        Standard forward mount
      • Thread:
        3/8-24 UNF-2A
      • Armor:
        Without armor
      • Unthreaded length:
        0.0 in
      • Overall case length:
        0.8 in
      • Total probe length:
        0.5 m (1.6 ft)
      • Connector:
        Miniature coaxial ClickLoc
      • Cable type:
        75 Ohm triaxial, FEP insulated
      • Agency approval option:
        00 - Not required
      • Probe tip diameter:
        8.0 mm (0.31 in)
      • Probe tip material:
        Polyphenylene sulfide (PPS)
      • Probe case material:
        AISI 303 or 304 stainless steel
      • Nominal probe DC resistance:
        7.45 +/- 0.50 Ohm
      • Minimum cable bend radius:
        25.4 mm (1.0 in)
      • Standard probe temperature:
        -52 to +177 deg C (-62 to +350 deg F)
      • Maximum thread engagement:
        0.563 in
      • Recommended probe case torque:
        11.2 N m (100 in lbf)
      • Matched-system linear range:
        2.0 mm (80 mil)
      • Matched-system frequency response:
        0 to 10 kHz, +0/-3 dB
      View as PDF Ask for Quote

      Information

      Information

      Overview Manuals Common Applications Product Precautions
      Bently Nevada 330101-00-08-05-02-00 is the unarmored, English-thread standard-mount probe configuration for a 3300 XL 8 mm Proximity Transducer System. Its compact fully threaded case and integral lead support non-contact machinery measurements when paired with the documented system components.
      • Forms the probe element of a matched eddy-current transducer loop
      • Supports static shaft-position and dynamic shaft-vibration measurement
      • Supports Keyphasor reference and speed measurement under manufacturer guidance
      • Retains documented interchangeability with compatible 3300-series components

      Install 330101-00-08-05-02-00 with a compatible extension cable and 3300 XL Proximitor Sensor, keeping the total system length, target material, mechanical clearances and monitoring-channel configuration consistent with the manufacturer documentation.

      Important Notice: Verify the full nameplate, 3/8-24 mounting thread, available case clearance, extension-cable length, Proximitor Sensor system length, target geometry, connector protection and final gap before commissioning.

      Apter Power 330101-00-08-05-02-00 Manuals and Guides
      Apter Power 330101-00-08-05-02-00 Product Technical Reference Bently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet 141194 Rev. AM

      Important Notice: The Apter Power reference summarizes this exact ordering configuration; the second link is the unmodified manufacturer datasheet containing system specifications, ordering codes, installation limits and dimensional figures.

      330101-00-08-05-02-00 radial shaft vibrationProvides the probe interface for non-contact dynamic shaft-vibration measurement on fluid-film bearing machines.
      330101-00-08-05-02-00 axial positionTracks static shaft displacement when the probe target, mounting geometry and matched transducer loop meet the published conditions.
      330101-00-08-05-02-00 Keyphasor referenceSupplies a phase-reference sensing point for compatible machinery-monitoring channels and documented target arrangements.
      330101-00-08-05-02-00 speed measurementSupports speed-related sensing when applied with the manufacturer's eddy-current probe guidance and overspeed application considerations.
      Read Bently Nevada publication 141194 Rev. AM before installing 330101-00-08-05-02-00, and verify the complete ordering code on the physical probe.
      1
      Approval option: The final 00 means agency approval is not required; confirm the installation classification before use.
      2
      Threading: Limit 3/8-24 engagement to 0.563 in and apply the published torque for the actual engaged length.
      3
      Cable routing: Maintain at least a 25.4 mm bend radius and protect the standard FEP-insulated lead from damage.
      4
      System matching: Add the 0.5 m probe lead to the extension-cable length and match the configured Proximitor Sensor total length.
      5
      Target and gap: Use the documented target basis, verify target and shaft geometry, and establish the operating gap before release.
      6
      Environment: Respect the standard probe temperature range and safely contain process liquids or gases because probes are not pressure-tested before shipment.

      Alternative Names

      Alternative Names

      330101 00 08 05 02 00 Bently Nevada 330101-00-08-05-02-00 330101 0.8 in case 0.5 m probe 330101 3/8-24 UNF unarmored probe 3300 XL 8 mm probe 330101-00-08-05-02-00

      Technical notes

      Technical notes

      Match the 0.5 m probe with an extension cable and Proximitor Sensor whose total system length is correct, then set the installed gap near -9 V DC (about 1.27 mm/50 mils) on the documented AISI 4140 steel basis. Keep 3/8-24 thread engagement at or below 0.563 in, maintain the 25.4 mm cable bend radius, and assemble the ClickLoc connector finger-tight.

      FAQS

      • What is Bently Nevada 330101-00-08-05-02-00?
        It is a standard forward-mount, unarmored 3300 XL 8 mm proximity probe with 3/8-24 UNF threads, a fully threaded 0.8 in case, a 0.5 m standard cable and a miniature coaxial ClickLoc connector.
      • How is the ordering code of Bently Nevada 330101-00-08-05-02-00 decoded?
        The 330101 base identifies the unarmored 3/8-24 UNF probe; 00 is 0.0 in unthreaded length, 08 is 0.8 in overall case length, 05 is 0.5 m total length, 02 is a standard-cable ClickLoc connector without protector, and the final 00 means agency approval is not required.
      • Which extension cable and Proximitor Sensor should be used with Bently Nevada 330101-00-08-05-02-00?
        Select the 3300 XL extension cable so its length plus the probe's 0.5 m lead equals the total length configured for the matching 3300 XL Proximitor Sensor.
      • What gap and measurement range apply to Bently Nevada 330101-00-08-05-02-00 in a matched system?
        The manufacturer gives a recommended radial-vibration gap of about 1.27 mm (50 mils), approximately -9 V DC, within a 2.0 mm (80 mil) matched-system linear range.
      • What target geometry should be checked for Bently Nevada 330101-00-08-05-02-00?
        The published basis uses an AISI 4140 steel target; the minimum flat target diameter is 15.2 mm, the minimum shaft diameter is 50.8 mm, and 76.2 mm is recommended.
      • What temperature and cable-routing limits apply to Bently Nevada 330101-00-08-05-02-00?
        The standard probe operating and storage range is -52 to +177 deg C, and the probe cable must maintain at least a 25.4 mm bend radius.
      • How should Bently Nevada 330101-00-08-05-02-00 be mounted and connected?
        Limit 3/8-24 thread engagement to 0.563 in, use the manufacturer torque limits for the engaged thread length, and tighten the ClickLoc connector finger-tight until it clicks.
      • Does Bently Nevada 330101-00-08-05-02-00 carry hazardous-area approvals?
        Its final 00 ordering option means agency approval is not required; confirm the physical nameplate and installation classification before placing it in a hazardous area.
      Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
      Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

      You May Also Like

      Product Browsing History

      We’re Here When You Need Us

      From product insights to customer service needs, our experienced service team will focus on getting you what you need quickly
      Contact Us

      Enquire

      Complete our online form.
      CONTACT >>

      Call Us

      Speak to one of our team.
      CONTACT >>

      Live Chat

      Send us a message.
      CONTACT >>