• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Speak to a sourcing specialist
      sales13@apterpower.com
      About Us Contact Us
      +86 18030235313 Need the right part?We are here to help.

      31000-16-05-00-079-03-02

      Probe Housing Assembly
      Ships by Saturday, November 7
      Product image is representative; revision or series may vary. Contact us to request a specific version.

      Product Describe：

      Bently Nevada 31000-16-05-00-079-03-02 is an external probe housing with a 3300 XL 8 mm probe, 0.5 m cable and 7.9 in penetration. It allows probe access through the machine case.
      • Manufacturer part number
        31000-16-05-00-079-03-02
      • Shipping
        Swift global dispatch
      • Condition
        New, original product
      • Shipping size (est.)
        37cm × 9cm × 8cm
      • Country of Origin
        USA

      Ask our team:

      Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com
      Dispatch Planning
      Confirm stock and lead time with our team.
      Dedicated Manager
      Personalized one-to-one VIP service
      ISO 9001:2015 Certified
      Trusted quality management
      Get a quick price for 31000-16-05-00-079-03-02
      E-mail *
      Mobile *
      Company
      Content *
      Quantity *
      Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
      Get a Quote
      For more information on how your data is processed and stored by Apterpower please read our privacy policy

      What happens after you enquire

      • 0

        Review your reference

        Send the complete model 31000-16-05-00-079-03-02, quantity and machine mounting details. Include the installed probe and system markings.

      • 1

        Confirm the offer

        Check the probe, sleeve, fittings, unit condition and agreed documents against the quotation. Confirm the dispatch date before ordering.

      • 2

        Arrange dispatch

        Provide the delivery destination and shipping instructions. Confirm packing and transport arrangements with the sales contact.

      • Match the complete marking

        Match 31000-16-05-00-079-03-02 against the offered assembly, sleeve and probe identification. Confirm the 0.5 m cable, no standoff and 7.9 in nominal penetration before selecting a replacement.

      • Check the offered item before ordering

        The offered condition is New, original product. Request current unit photos and verify the housing, probe cable, connectors, seals and fitting package. Agree the supplied documents and dispatch arrangements in the quotation.

      Technical specifications for 31000-16-05-00-079-03-02

      • Manufacturer:
        Bently Nevada
      • Product Category:
        Machinery Monitoring Systems
      • Spare Part Number:
        31000-16-05-00-079-03-02
      • Weight:
        1.5 kg
      • Tariff Code:
        8537101190
      • Assembly type:
        31000 English proximity probe housing
      • Installed probe:
        3300 XL 8 mm probe (option 16)
      • Probe cable length:
        0.5 m (20 in)
      • Standoff adapter:
        None
      • Nominal probe penetration:
        7.9 in (200.7 mm)
      • Penetration adjustment:
        ±0.5 in (13 mm)
      • Fittings:
        Two plugs; 3/4-14 NPT fitting; SST reducer; cable seal grip and grommets
      • Reducer thread:
        3/4-14 NPT to 1/2-14 NPT
      • Mounting thread:
        3/4-14 NPT
      • Housing material:
        Conductive glass-reinforced PPS
      • Probe sleeve and chain:
        AISI 304 stainless steel
      • Outer sleeve and screws:
        AISI 303 stainless steel
      • Enclosure protection:
        Type 4X; IP66
      • Retaining-nut torque:
        29.4 N m (260 in-lb)
      • Probe temperature range:
        -51 to +177 °C (operating and storage)
      View as PDF Ask for Quote

      Information

      Overview Downloads Applications / Compatibility Product Precautions
      • Access from outside the machine case helps maintenance teams adjust the sensing gap without dismantling the machine. Bently Nevada 31000-16-05-00-079-03-02 positions the probe in a supported sleeve while enclosing its cable connection.
      Probe configuration: 3300 XL 8 mm probe with connector
      Cable option: 0.5 m (20 in)
      Standoff arrangement: None
      Mechanical reach: 7.9 in (200.7 mm) nominal penetration
      The selected 0.5 m cable must remain part of a correctly matched probe, extension cable and Proximitor chain. Mechanical access at the housing does not replace channel configuration or calibration.

      The sleeve reach is within the cable-length allowance. Plan access to the probe identification label because this configuration exceeds the limit for leaving that label outside the sleeve.
      Controller platform reference: 31000/32000 housing specifications. Follow the probe instructions and approved machine drawing.
      Bently Nevada 31000-16-05-00-079-03-02 Manuals & Downloads. Use the original housing excerpt together with the model-specific installation verification guide.
      The first file preserves original manufacturer pages; the second is an Apter Power preparation reference. Use the applicable installation instructions and machine drawings.
      System and supply context: Bently Nevada 31000-16-05-00-079-03-02 combines a 31000 housing, a 3300 XL 8 mm probe and a 0.5 m integral cable for machine-case mounting.

      Platform applications: External access supports gap setting, probe service and cable inspection at the machine case. Select the measurement location and complete transducer system for the intended channel.
      Follow the applicable probe installation instructions and site isolation procedure. The housing protects the assembly but does not replace pressure containment or hazardous-area engineering.
      Verify the mounting

      Check the 3/4-14 NPT outer-sleeve connection, 7.9 in (200.7 mm) penetration and none standoff arrangement against the machine drawing.

      Set the sensing gap

      Insert the probe sleeve and set the gap using the applicable probe procedure. The mechanical penetration value is not a target air-gap setting.

      Secure the retaining nut

      Fit the retainer under the retaining nut and tighten the nut to the recommended 29.4 N m. Keep the sleeve and probe position stable during tightening.

      Seal the cable entry

      Fit the correct grommet and cable seal grip, then close unused openings. Tighten hole-plug nuts to 0.5 N m where they are used.

      Check process exposure

      Control any leakage independently of the plastic enclosure. Sustained hot water or condensing steam can weaken PPS; assess seals and process conditions before operation.

      Restore and verify

      Reconnect the matched cable chain, restore connector protection and fasten the cover. Check the final probe gap and channel response before the machine returns to service.

      Alternative Names

      Bently Nevada 31000-16-05-00-079-03-02 31000-16-05-00-079-03-02 proximity probe housing 31000 English housing assembly (31000-16-05-00-079-03-02)

      Technical notes

      Installation relationship: The selected C plus D reach is 7.9 in. Use the machine drawing and probe gap-setting procedure to establish the installed position.

      Protection: Type 4X and IP66 apply to the enclosure. This assembly is not an explosion-proof housing or a pressure vessel; any intrinsically safe installation requires the complete approved transducer arrangement.

      Technical reference: Bently Nevada 31000 and 32000 Proximity Probe Housing Assemblies, 141610 Rev. R, pp. 1–6 and 15–16. Source details are separate from the product and purchasing information.

      FAQ View All FAQ

      • Which probe is included in 31000-16-05-00-079-03-02?
        This assembly uses a 3300 XL 8 mm proximity probe with a connector. Its 16 probe option is distinct from the multiple-approval and connector-protector options; verify the actual probe marking before specifying certificates or accessories.
      • How far can the sleeve of 31000-16-05-00-079-03-02 be adjusted?
        The nominal probe penetration is 7.9 in and the sleeve adjustment range is plus or minus 0.5 in. Set the final sensing gap using the probe instructions and machine drawing; penetration is a mechanical reach, not the operating air gap.
      • Does the 0.5 m cable on 31000-16-05-00-079-03-02 leave its identification label exposed?
        The combined standoff and penetration is 7.9 in. This is below the 15.5 in limit for the 0.5 m probe cable, but exceeds the 2.5 in limit for keeping the cable part-number and serial-number label visible outside the sleeve. Arrange access to the marking during inspection.
      • What does fitting option 03 supply with 31000-16-05-00-079-03-02?
        It provides two plugs, one 3/4-14 NPT fitting, a stainless steel 3/4-14 to 1/2-14 NPT reducer and a cable seal grip with grommets for the specified cable sizes. Select the matching grommet and seal unused housing openings.
      • Can 31000-16-05-00-079-03-02 serve as an explosion-proof enclosure?
        No. The PPS enclosure provides mechanical and environmental protection. Intrinsically safe use requires a suitable approved transducer system and appropriate barriers; the housing alone does not establish hazardous-area suitability.
      • Why does 31000-16-05-00-079-03-02 require a casing fixed to the bearing for radial vibration measurement?
        A proximity probe measures shaft motion relative to its mounting reference. Movement between the casing and bearing changes that reference, so the casing must be affixed to the bearing for an accurate relative vibration signal.
      • What should I send when requesting a quotation for 31000-16-05-00-079-03-02?
        Send the complete model, quantity, destination and required date to sales13@apterpower.com. Include the installed assembly marking and any required accessories so the offer can identify the correct probe, sleeve, fittings and scope of supply.
      • Can I review photos and documents before buying 31000-16-05-00-079-03-02?
        Request current unit photos showing the full marking, housing, sleeve and probe cable. Ask which inspection records or certificates are available, and confirm the agreed documents and condition in the quotation before placing the order.
      Manufacturers

      Supporting new and legacy automation

      Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          PRODUCTS IN SEARCH PAGE ()
          50+ account managers available now
          Related reading

          Related cases and sourcing guidance

          View all case studies
          Manufacturers

          You May Also Like

          Explore related automation components available through Apter Power.
          Manufacturers

          Product Browsing History

          Revisit the products you recently viewed on Apter Power.
          SPEAK TO OUR TEAM
          Let’s find the right solution for you.
          Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.

          • Whatsapp: +86 18030235313

            Send us a message.

          • sales13@apterpower.com

            Complete our online form.

          • +86 18030235313

            Speak to our team in your native language.