• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Speak to a sourcing specialist
      sales13@apterpower.com
      About Us Contact Us
      +86 18030235313 Need the right part?We are here to help.

      31000-16-05-00-033-03-02

      Probe Housing Assembly
      Ships by Saturday, November 7
      Product image is representative; revision or series may vary. Contact us to request a specific version.

      Product Describe：

      Bently Nevada 31000-16-05-00-033-03-02 is a probe housing assembly with a 3300 XL 8 mm probe, 0.5 m cable and 3.3 in penetration. Its sleeve allows external gap adjustment.
      • Manufacturer part number
        31000-16-05-00-033-03-02
      • Shipping
        Swift global dispatch
      • Condition
        New, original product
      • Shipping size (est.)
        37cm × 9cm × 8cm
      • Country of Origin
        USA

      Ask our team:

      Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com
      Dispatch Planning
      Confirm stock and lead time with our team.
      Dedicated Manager
      Personalized one-to-one VIP service
      ISO 9001:2015 Certified
      Trusted quality management
      Get a quick price for 31000-16-05-00-033-03-02
      E-mail *
      Mobile *
      Company
      Content *
      Quantity *
      Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
      Get a Quote
      For more information on how your data is processed and stored by Apterpower please read our privacy policy

      What happens after you enquire

      • 0

        Review your reference

        Send the complete model 31000-16-05-00-033-03-02, quantity and machine mounting details. Include the installed probe and system markings.

      • 1

        Confirm the offer

        Check the probe, sleeve, fittings, unit condition and agreed documents against the quotation. Confirm the dispatch date before ordering.

      • 2

        Arrange dispatch

        Provide the delivery destination and shipping instructions. Confirm packing and transport arrangements with the sales contact.

      • Match the complete marking

        Match 31000-16-05-00-033-03-02 against the offered assembly, sleeve and probe identification. Confirm the 0.5 m (20 in) cable, no standoff adapter and 3.3 in (83.8 mm) nominal penetration before selecting a replacement.

      • Check the offered item before ordering

        The offered condition is New, original product. Request current unit photos and verify the housing, probe cable, connectors, seals and fitting package. Agree the supplied documents and dispatch arrangements in the quotation.

      Technical specifications for 31000-16-05-00-033-03-02

      • Manufacturer:
        Bently Nevada
      • Product Category:
        Machinery Monitoring Systems
      • Spare Part Number:
        31000-16-05-00-033-03-02
      • Weight:
        1.5 kg
      • Tariff Code:
        8537101190
      • Counliy of origin:
        USA
      • Assembly type:
        31000 English proximity probe housing
      • Installed probe:
        3300 XL 8 mm probe (option 16)
      • Probe cable length:
        0.5 m (20 in)
      • Standoff adapter:
        None
      • Nominal probe penetration:
        3.3 in (83.8 mm)
      • Penetration adjustment:
        ±0.5 in (13 mm)
      • Fittings:
        Two plugs; 3/4-14 NPT fitting; SST reducer; cable seal grip and grommets
      • Reducer thread:
        3/4-14 NPT to 1/2-14 NPT
      • Mounting thread:
        3/4-14 NPT
      • Housing material:
        Conductive glass-reinforced PPS
      • Probe sleeve and chain:
        AISI 304 stainless steel
      • Outer sleeve and screws:
        AISI 303 stainless steel
      • Enclosure protection:
        Type 4X; IP66
      • Retaining-nut torque:
        29.4 N m (260 in-lb)
      • Probe temperature range:
        -51 to +177 °C (operating and storage)
      View as PDF Ask for Quote

      Information

      Overview Downloads Applications / Compatibility Product Precautions
      • For a radial shaft measurement, the probe support must remain fixed to the bearing reference. Bently Nevada 31000-16-05-00-033-03-02 provides a sleeve-mounted sensing point and a protective enclosure around the cable junction.
      Probe configuration: 3300 XL 8 mm probe with connector
      Cable option: 0.5 m (20 in)
      Standoff arrangement: None
      Mechanical reach: 3.3 in (83.8 mm) nominal penetration
      Direct mounting removes the standoff adapter from the assembly. Position the outer sleeve to retain room for the housing cover, cable connection and final gap adjustment.

      After the probe is set, secure the retaining nut and inspect the sealed openings. Treat enclosure protection and process leakage control as separate installation requirements.
      Controller platform reference: 31000/32000 housing specifications. Follow the probe instructions and approved machine drawing.
      Bently Nevada 31000-16-05-00-033-03-02 Manuals & Downloads. Use the original housing excerpt together with the model-specific installation verification guide.
      The first file preserves original manufacturer pages; the second is an Apter Power preparation reference. Use the applicable installation instructions and machine drawings.
      System and supply context: Bently Nevada 31000-16-05-00-033-03-02 combines a 31000 housing and a 3300 XL 8 mm probe with a 0.5 m integral cable in a direct-mount arrangement.

      Platform applications: This assembly combines direct machine-case mounting with an accessible probe connection. Confirm the bearing reference, sensing target and cable route before installation.
      Follow the applicable probe installation instructions and site isolation procedure. The housing protects the assembly but does not replace pressure containment or hazardous-area engineering.
      Verify the mounting

      Check the 3/4-14 NPT outer-sleeve connection, 3.3 in (83.8 mm) penetration and none standoff arrangement against the machine drawing.

      Set the sensing gap

      Insert the probe sleeve and set the gap using the applicable probe procedure. The mechanical penetration value is not a target air-gap setting.

      Secure the retaining nut

      Fit the retainer under the retaining nut and tighten the nut to the recommended 29.4 N m. Keep the sleeve and probe position stable during tightening.

      Seal the cable entry

      Fit the correct grommet and cable seal grip, then close unused openings. Tighten hole-plug nuts to 0.5 N m where they are used.

      Check process exposure

      Control any leakage independently of the plastic enclosure. Sustained hot water or condensing steam can weaken PPS; assess seals and process conditions before operation.

      Restore and verify

      Reconnect the matched cable chain, restore connector protection and fasten the cover. Check the final probe gap and channel response before the machine returns to service.

      Alternative Names

      Bently Nevada 31000-16-05-00-033-03-02 31000-16-05-00-033-03-02 proximity probe housing 31000 English housing assembly (31000-16-05-00-033-03-02)

      Technical notes

      Installation relationship: The selected C plus D reach is 3.3 in. Use the machine drawing and probe gap-setting procedure to establish the installed position.

      Protection: Type 4X and IP66 apply to the enclosure. This assembly is not an explosion-proof housing or a pressure vessel; any intrinsically safe installation requires the complete approved transducer arrangement.

      Technical reference: Bently Nevada 31000 and 32000 Proximity Probe Housing Assemblies, 141610 Rev. R, pp. 1–6 and 15–16. Source details are separate from the product and purchasing information.

      FAQ View All FAQ

      • Does 31000-16-05-00-033-03-02 include a standoff adapter?
        No. Option 00 specifies no standoff adapter, so the housing mounts through the selected outer-sleeve arrangement. The final 02 option specifies a 3/4-14 NPT mounting thread.
      • What is the difference between the penetration and sensing gap on 31000-16-05-00-033-03-02?
        The 033 option sets a nominal 3.3 in probe penetration through the machine case. The sensing gap is the separate clearance between the probe tip and target, established during installation using the probe procedure.
      • How are the main structural parts of 31000-16-05-00-033-03-02 constructed?
        The housing is conductive, glass-reinforced PPS thermoplastic. The probe sleeve and retaining chain are AISI 304 stainless steel, while the outer sleeve and exterior screws are AISI 303 stainless steel.
      • Does IP66 make 31000-16-05-00-033-03-02 suitable as a pressure vessel?
        No. IP66 and Type 4X describe enclosure protection against the specified environmental exposure. The plastic housing is not designed to resist internal or external pressure, and the user must safely contain any leakage from the probe assembly.
      • Which tightening values apply when fitting 31000-16-05-00-033-03-02?
        The recommended retaining-nut torque is 29.4 N m (260 in-lb). If hole plugs are used, their nuts are tightened to 0.5 N m (5 in-lb). These are different fasteners and their torque values must not be interchanged.
      • Can long exposure to hot water affect 31000-16-05-00-033-03-02?
        Yes. Prolonged contact with hot water or condensing steam can permanently reduce the strength of the PPS housing. The probe temperature range alone does not establish suitability of the entire housing for sustained steam exposure.
      • How is the dispatch date confirmed for 31000-16-05-00-033-03-02?
        Provide the required quantity and destination with the enquiry. The sales team confirms availability, preparation time and the proposed dispatch date in the offer; the requested delivery date is not a shipment guarantee.
      • Which supplied items should be stated in an order for 31000-16-05-00-033-03-02?
        The order should identify the complete assembly, probe and cable, sleeve, fitting option 03 components and required documents. Request written confirmation of the actual included parts and unit condition before accepting the quotation.
      Manufacturers

      Supporting new and legacy automation

      Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          PRODUCTS IN SEARCH PAGE ()
          50+ account managers available now
          Related reading

          Related cases and sourcing guidance

          View all case studies
          Manufacturers

          You May Also Like

          Explore related automation components available through Apter Power.
          Manufacturers

          Product Browsing History

          Revisit the products you recently viewed on Apter Power.
          SPEAK TO OUR TEAM
          Let’s find the right solution for you.
          Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.

          • Whatsapp: +86 18030235313

            Send us a message.

          • sales13@apterpower.com

            Complete our online form.

          • +86 18030235313

            Speak to our team in your native language.