With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 200150-14-CN part of the Trendmaster Pro series, is a case-mounted piezoelectric accelerometer specifically for monitoring rotating machinery vibration. The product comprises a hermetically sealed 316L stainless steel sensor body with internal shear ceramic elements. This complete part number represents the 200150 model, a 3/8-24 mounting stud (-14), and China regional explosion-proof certification (-CN).
Hermetically Sealed 316L Stainless Steel Case
10-1000 Hz Frequency Response
Seamless ProTIM 200200 Matching & High-Density Data Acquisition
The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs. The 200150 Accelerometer also operates with the Trendmaster 2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors.
The 20015x Accelerometers feature a hermetically sealed, stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The transducer’s top-mounted, 5-pin connector allows you to easily install and remove the interconnecting signal cable. A 3/8-24 threaded hole on the bottom of the sensor’s casing accommodates several mounting options.
The 20015x Accelerometers contain a piezoelectric sensing device that generates a charge when it is subjected to vibration. The accelerometers electronically convert this charge to a differential voltage signal that is proportional to the acceleration that is parallel to the sensitive axis of the transducer.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 200150-14-CN Trendmaster Pro Accelerometer Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Power Generation
Monitors steam turbine casing vibrations to prevent early bearing degradation.
Oil & Gas
Tracks vibration on offshore platform centrifugal compressors.
Petrochemical
Provides condition monitoring for reactor agitators and refinery cracking unit fans.
Steel & Metallurgy
Tracks bearing vibrations in hot rolling mill gearboxes and blast furnace blowers.
Marine & Shipping
Tracks dynamic vibration of marine propulsion shaft bearings and auxiliary pumps.
Automotive Manufacturing
Monitors vibrations of heavy stamping press hydraulic pumps and paint shop exhaust systems.
During installation, the tightening torque for Bently Nevada 200150-14-CN must be strictly controlled between 2.7 and 6.8 N·m, ensuring a flat mounting surface to guarantee accurate signal transmission within 10 to 1000 Hz. For hazardous area operations, the intrinsically safe electrical parameters specified by its China explosion-proof certification (-CN) must be rigorously followed. Due to its hermetically sealed housing, field disassembly or repair is strictly prohibited, any damaged unit must be entirely replaced.
The 200150-14-CN accelerometer operates within a temperature range of -40°C to +105°C, features a 3/8-24 mounting stud, and holds China explosion-proof certification. It is utilized in conjunction with 200151 series shielded cables and ProTIM modules.
What is the fundamental operating principle of 200150-14-CN?
The internal shear ceramic piezoelectric element generates a charge under vibration, which electronically converts into a proportional differential voltage signal output.
What is the standard sensitivity of 200150-14-CN?
The standard nominal sensitivity of the sensor at 80 Hz is 100 mV/g (10.2 mV/(m/s²)).
Which external interface modules does 200150-14-CN interface with?
It interfaces with the 200200 ProTIM-R modules, 200100 flexiTIM modules, or 1900/25 and 1900/27 monitors within the Trendmaster Pro system.
Do you offer global delivery services?
Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
How many parts do you have in stock?
We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies.
What is the specified torque for mounting the 200150-14-CN?
The specified installation tightening torque during mechanical fixation must be controlled between 2.7 and 6.8 N·m.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
