Bently Nevada 130539-34 is an evidence-bounded 330400/330425 accelerometer interconnect cable. Exact model identity is documented by the cited manufacturer source.
- Exact requested identity: 130539-34
- Product class: 330400/330425 accelerometer interconnect cable
- Base cable part: 130539
- Length suffix: 34 ft
System role: It connects the documented three-wire accelerometer using a shielded cable, sensor plug/boot and terminal-lug end. Only facts stated by the cited Baker Hughes / Bently Nevada material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Use only with the exact host, terminal base, cable, firmware and engineering configuration documented for the installed system. Verify the 34-foot suffix, connector/boot, terminal-lug end and routing; do not substitute 16925 or 16710 cable constructions without the exact drawing. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Important Notice: Verify the complete Bently Nevada 130539-34 physical label and installed-system documentation before use.
Apter Power 130539-34 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited ABB official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current ABB documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for Bently Nevada 130539-34.
System documentationProvides a source-traceable boundary for the documented Bently Nevada 330400 and 330425 accelerometer system configuration.
Commissioning reviewGuides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact Baker Hughes / Bently Nevada documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete Bently Nevada 130539-34 label, revision and installed-system documentation before use.
2Verify the 34-foot suffix, connector/boot, terminal-lug end and routing; do not substitute 16925 or 16710 cable constructions without the exact drawing.
3De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up controller, drive, network and configuration data before replacement, migration or firmware work.
5Verify every companion module, cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Videos
News
Applications
