With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 1794-TB3S functions as a high-integrity terminal base unit within the Rockwell automation platform. Utilizing a screwless spring-tension terminal strip, this 16-point I/O interface ensures long-term contact reliability and continuous uptime for distributed automation loops.
Features 18 built-in +V terminals and 18 Common terminals
Enables direct termination for 3-wire field devices
Upgraded to support a 125V wide operating and isolation voltage range
1794-TB3S features spring-clamp terminations, which serves as the primary distinction from the standard screw-clamp base (1794-TB3). The spring-loaded mechanism provides a constant, self-adjusting retention force on the conductors, automatically compensating for thermal expansion, contraction, or structural relaxation. This eliminates the necessity for routine screw-retightening, reducing installation labor while delivering high reliability in heavy-vibration industrial environments like automotive stamping lines, material conveyors, and mining machinery.
Functionally, the internal circuitry of this terminal base is primarily intended for integration with input modules when utilizing 3-wire input proximity switches, allowing direct sensor power routing, common return, and signal line landing on the same base. Beyond input configurations, its electrical topology ensures it can also be used with output modules to drive external actuators, valves, or relays. Rated for a maximum total current capacity of 10 Amperes, the 1794-TB3S supports Removal and Insertion Under Power, enabling modules to be hot-swapped without disconnecting field cables or disrupting backplane bus communication. Fully integrated within the Studio 5000 / RSLogix 5000 hardware profiles, this terminal base serves as a core hardware component for vibration-resistant wiring and power management in industrial cabinets.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Allen Bradley 1794-TB3S Terminal Base Unit Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Wind Power Generation
Installed inside nacelle control cabinets at the top of wind turbines to connect yaw system limit switches, anemometers, and main shaft bearing temperature sensors, resisting continuous shaking and vibration in high-altitude environments.
Marine & Offshore Engineering
Used in marine Alarm Monitoring Systems (AMS) and thruster controls to connect engine room oil mist detectors, fuel pump statuses, and valve feedbacks, with spring-clamp technology effectively coping with vessel rolling and pitching caused by waves.
Oil Drilling Rigs
Used in top drive control systems or mud pump room control cabinets to connect mud pressure switches, drawworks position sensors, and explosion-proof buttons, ensuring stable signals under harsh drilling vibration environments.
Rubber & Plastic Extruders
Used in control cabinets of large tire curing presses and plastic extrusion lines to connect heating zone thermocouples (with analog modules), melt pressure switches, and mold open/close limits.
Steel Rolling Equipment
Used in roller table and looper controls of hot or cold rolling lines to connect looper angle sensors, Hot Metal Detectors (HMD), and hydraulic valve feedbacks, coping with severe ground vibration when steel ingots pass through.
When using the 1794-TB3S, strictly follow the tiered wiring discipline—Row A (Signal), Row B (Common/-V), and Row C (+V)—to prevent reversed polarity or short circuits. The internal self-assembling power rail is rated for a maximum of 10 A; do not overload it when daisy-chaining multiple high-power modules.
Lastly, during hot-swapping (RIUP), always apply smooth and perfectly vertical force—never tilt or force the electronic module—to protect the mating pins inside the base from bending or damage.
The 1794-TB3S is a screwless, highly vibration-resistant spring-clamp base, accommodating 0.34–3.3 mm² wires. Its internal power rail supports a maximum of 125V DC/AC (50/60Hz) and a 10 A continuous current, featuring a 125V continuous isolation voltage tailored for safe and secure termination in severe vibration and medium-to-high voltage environments.
The 1794-TB3S is a spring-clamp terminal base unit within the Allen-Bradley FLEX I/O system. Operating as the underlying field wiring medium, it is primarily used to house and interface with 16-point digital or AC I/O electronic modules.
How do you install and use the 1794-TB3S in a control cabinet?
Snap it directly onto a standard DIN rail and slide it horizontally to engage with adjacent bases. Land the field sensor and actuator cables using its built-in spring terminals, and finally, plug and lock the matching electronic module on top of it.
In what specific harsh environments is the 1794-TB3S best suited for?
It is perfectly suited for environments with continuous, severe mechanical vibration (such as mining conveyors, cranes, and engine rooms), as its spring-clamp mechanism ensures that cables will never back out or loosen due to vibration.
How many total termination points are available on the 1794-TB3S?
The 1794-TB3S is configured with a total of 52 terminals, utilizing a classic three-tier (Rows A, B, and C) multi-layer layout, which greatly simplifies categorized wiring for multi-wire field devices.
Which row of terminals on the 1794-TB3S is designated for field signal lines?
All field sensor and actuator signal wires are landed exclusively on the 0 through 15 terminals located on the top row (Row A) of the 1794-TB3S.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications