-
Match the complete marking
Include TC520 3BSE001449R1 and any revision or assembly number visible on the item. Keep the exact reference on your enquiry and quotation.
-
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered TC520 3BSE001449R1 with the installed communication module and applicable ABB documentation.
Technical specifications for TC520 3BSE001449R1
-
Manufacturer:ABB
-
Product Category:DCS Systems
-
Spare Part Number:ABB TC520 3BSE001449R1
-
Weight:0.26 kg
-
Tariff Code:8537101190
-
Product family:Advant Master
-
Exact type:TC520
-
ABB article:3BSE001449R1
-
Functional designation:System Status Collector
-
Published AC 450 listing:Listed
-
Published AC 460 listing:Listed
Information
- TC520 3BSE001449R1 is a system-status component in an Advant Master installation; its application depends on the host controller and project wiring.
Status role: System Status Collector
Selection control: Match article and installed configuration
ABB lists TC520 under the same article number, 3BSE001449R1, in both AC 450 and AC 460 spare-parts sections. This establishes a system-family reference, while the suitability of a replacement for a specific controller, revision and interface remains an installation-level check.
Before a service exchange, identify the fitted module and capture its visible markings, slot location and adjacent hardware. Preserve the as-found status and diagnostic records, then compare the restored system behavior with the approved site acceptance procedure.
-
ABB TC520 3BSE001449R1 technical reference
Apter Power technical reference - PDF, 1 page. System Status Collector identity, AC 450 / AC 460 context and source boundaries. -
ABB TC520 3BSE001449R1 installation guide
Apter Power installation verification guide - PDF, 1 page. Board identification, installed-system matching and service acceptance checks.
AC 460 installed systems: Match TC520 to the AC 460 reference and the specific installation before replacement.
-
Advant Master AC 450 service
Review TC520 as a listed spare for an AC 450 system with matching installed hardware. -
Advant Master AC 460 service
Use the AC 460 parts-list reference when the installed system and module identity agree. -
Status collection integration
Confirm the status path and interface assignments from project drawings and controller configuration. -
Replacement planning
Compare type, article, revision and installation context before fitting the offered unit.
Photograph the full TC520 marking, installed position and surrounding connectors before removal.
Capture system alarms and controller diagnostics so the service result can be compared.
Match the actual AC 450 or AC 460 hardware arrangement to the project documentation.
Follow site isolation and electrostatic-discharge procedures while handling the module.
Reinstall only after checking mating hardware, slot and revision compatibility.
Run the approved functional test and compare status changes and alarm behavior with the baseline.
Alternative Names
Technical notes
Verified identity: ABB lists TC520 as the System Status Collector under article 3BSE001449R1.
System boundary: The public parts list places the article in AC 450 and AC 460 sections but does not define site-specific wiring.
Service evidence: Preserve as-found diagnostics and confirm the affected status path after replacement.
FAQ View All FAQ
-
Which host-system record should accompany a TC520 3BSE001449R1 replacement?Keep the AC 450 or AC 460 rack list, occupied slot, adjacent modules and project revision together.
-
Can TC520 3BSE001449R1 be selected from the type name alone?Confirm the full 3BSE001449R1 article and visible revision against the installed unit.
-
What should be captured before disconnecting TC520 3BSE001449R1?Record module photos, connector arrangement, controller diagnostics and any active system alarms.
-
How should a status signal associated with TC520 3BSE001449R1 be traced?Use the project-specific wiring and controller configuration to identify its source and destination.
-
Does the AC 450 listing make TC520 3BSE001449R1 interchangeable with every AC 460 installation?No; verify the rack, interface and revision for the particular project.
-
What should be examined when a replacement TC520 3BSE001449R1 gives inconsistent status?Check seating, mating connectors, host configuration and the original diagnostic baseline.
-
Which test demonstrates successful restoration of TC520 3BSE001449R1?Use the approved site procedure to exercise the relevant status path and review alarms and controller indications.
-
How should a TC520 3BSE001449R1 revision difference be handled?Obtain compatibility approval for the installed controller and document the accepted revision in the work record.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
TC520 3BSE001449R1Product Details -
AI830A 3BSE040662R1Product Details -
RINT-5611C 68718929Product Details -
3BHE004573R0142 UFC760BE142Product Details -
1SFB536068D1011Product Details -
YPQ110A 3ASD573001A5Product Details -
CPM810Product Details -
XN05Product Details -
XN03Product Details -
XM02Product Details
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.






