ABB 1SAP180100R0001 MC502B0 is an evidence-bounded MC502 AC500 SD memory card with requested MC502B0 label. ABB maps 1SAP180100R0001 exactly to MC502, an AC500 SD memory card; the public ABB record does not map the requested MC502B0 label.
- ABB product ID: 1SAP180100R0001
- Verified model: MC502
- Product type: AC500 SD memory card
- Published capacity: 512 MB
System role: ABB documentation identifies MC502 as a 512 MB SD card used in AC500-eCo update workflows and ACS580MV service procedures. Only facts stated by the cited ABB material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Use the exact AC500 or drive service instruction for card preparation, supported files, power sequencing and data backup. Treat MC502B0 as an unverified requested label until the physical card or ABB order record proves the suffix; do not claim it as a distinct revision or replacement. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Important Notice: Verify the complete ABB 1SAP180100R0001 MC502B0 physical label and installed-system documentation before use.
Apter Power 1SAP180100R0001 MC502B0 - Label Verification Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited ABB official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current ABB documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for ABB 1SAP180100R0001 MC502B0.
System documentationProvides a source-traceable boundary for the documented AC500 SD-memory-card use configuration.
Commissioning reviewGuides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete ABB 1SAP180100R0001 MC502B0 label, revision and installed-system documentation before use.
2Treat MC502B0 as an unverified requested label until the physical card or ABB order record proves the suffix; do not claim it as a distinct revision or replacement.
3De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up controller, drive, network and configuration data before replacement, migration or firmware work.
5Verify every companion module, cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Videos
News
Applications
