With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The GJR2368900R1551 87TS01K-E is a CDS slave bus coupling module for Master Station systems within the ABB Procontrol P14 distributed control system architecture. Operating as a communication gateway physical interface card within the distributed central control network, its core function is to establish and maintain bidirectional serial data channels between local I/O substations and the central Control Diagnosis Station or the Fiber Distributed Data Interface network system.
Proprietary PROCONTROL diagnostic bus protocol
Hot-Swap and Insertion Safety
Backward Spare Compatibility
All operational currents required by the module's internal computing-level integrated circuits and opto-isolation circuits are drawn directly from the rear rack backplane bus, eliminating the need to arrange independent external power supply cables on the front panel or edges.
The external input/output channels (Field/Bus Side) and the internal rack data paths (Logic Side) utilize optocouplers for galvanic isolation, blocking transient surges or high-frequency interference signals from penetrating into the upper-level central master CPU unit. The module adopts a standard 19-inch plug-in printed circuit board (PCB) physical architecture, and its circuit hardware includes Connector X11, Connector X21, and Connectors X2 & X3.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
ABB GJR2368900R1551 87TS01K-E Coupling Module Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Thermal Power
Used to upload hardware self-test and fault data from various local boiler I/O racks to the centralized Control Diagnosis Station (CDS) in the main control room.
Nuclear Power
Used for transmitting operational status parameters from steam turbine generator auxiliary control stations to achieve centralized monitoring of the plant's non-safety class control network.
Hydroelectric Power
Used to pack the communication health status of each hydro-turbine unit and common auxiliary control rack, sending the data to the centralized diagnostic bus.
Gas Turbine Combined Cycle Power Plants
Used for transmitting backplane bus fault diagnostic data from the core gas turbine control enclosure to ensure cross-cabinet hardware alarm consistency.
Iron & Steel Smelting and Blast Furnace Control
Used for routing fault codes from internal communication boards in blast furnace blower and top batching control stations to improve system maintainability in high-temperature and high-dust environments.
Pulp and Paper Industry
Used to transmit underlying hardware alarms, such as communication interruptions between large racks in pulping and papermaking workshops, to the CDS to shorten unplanned downtime.
When operating the GJR2368900R1551 87TS01K-E coupling module, configure the slave node address correctly to prevent communication conflicts on the diagnostic bus. Prior to module insertion or extraction, verify that the rack grounding system functions properly, and perform the swap under power-off conditions or while the redundant network link is active to prevent data link interruptions to the central Control Diagnosis Station. Regularly clean the backplane gold fingers and communication interfaces to prevent signal attenuation caused by dust and oxidation layers.
The ABB GJR2368900R1551 87TS01K-E is a CDS slave bus coupling module for Master Station systems within the ABB Procontrol P14 distributed control system architecture. It draws operational currents directly from the rack backplane, eliminating the requirement for external individual power cabling.
It is an industrial-grade Control Diagnosis Station (CDS) slave bus coupling module manufactured by ABB, dedicated to Master Station systems within the ABB PROCONTROL P14 Distributed Control System (DCS) architecture.
How to use products like GJR2368900R1551 87TS01K-E?
Insert it into a standard 19-inch P14 rack slot to connect with internal data paths via the rear backplane, and utilize front-end hardware interfaces (such as Connectors X11 and X21) to connect with external CDS diagnostic stations or networks.
What is the core function of GJR2368900R1551 87TS01K-E?
The core function is serving as a communication gateway within the distributed central control network of a power plant, responsible for establishing and maintaining bidirectional data channels between local I/O substations and the central CDS or fiber network system.
Do you offer global delivery services?
Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
How many parts do you have in stock?
We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies. If you are unable to find what you are looking for then don’t panic.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
