Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 5466-1035
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 5466-1035
-
Manufacturer:WOODWARD
-
Product Category:Gas Turbine Control
-
Spare Part Number:5466-1035
-
Estimated shipping dimensions:2.5x24.6x26.1cm
-
Weight:0.9 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Product family:MicroNet CPU5200
-
Exact part status:Non-preferred
-
Supported use:Spares and repairs for existing systems
-
Processor:PowerPC 5200, 400 MHz
-
Flash memory:64 MB
-
RAM:128 MB
-
Communication:Dual CAN
-
Hardware designation:Usage Plus
-
Coder versions:4.06–5.04
-
Return part:5466-1036
-
Revision H and later:Polyacrylate conformal coating
-
Revision G:Silicone conformal coating; not convertible to polyacrylate
-
Lifecycle note:Non-preferred since 2015; planned inactive in 2028
Information
Overview
Manuals
Common Applications
Product Precautions
The 5466-1035 MicroNet CPU5200 provides a PowerPC-based processing platform for documented Woodward control-system configurations.
- 400 MHz PowerPC 5200 processor
- 64 MB flash and 128 MB RAM
- Dual CAN communication capability
- Usage Plus hardware with Coder 4.06–5.04
Woodward identifies 5466-1035 as a non-preferred CPU5200 module intended for supported spares and repairs rather than new-system design. Revision H and later use a polyacrylate conformal coating, while revision G uses silicone coating and cannot be converted to the newer coating. Commissioning must retain the approved MicroNet application, rack assignment and network configuration.
Important Notice: Confirm the complete 5466-1035 part number, hardware revision, Coder version and installed MicroNet configuration before replacement.
WOODWARD 5466-1035 Manuals & Downloads
WOODWARD 5466-1035 Official Manufacturer Manual (PDF)WOODWARD 5466-1035 Installation & Commissioning Guide (PDF)
The first document reproduces applicable official manufacturer pages unchanged; the second provides a separate evidence-led installation and commissioning workflow.
Existing MicroNet controls
Replacement processing hardware for documented MicroNet installations using the approved CPU5200 configuration.
Turbine control service
Supported spare or repair work where the rack, application and communication design already specify 5466-1035.
Revision-controlled maintenance
Sites that must preserve the installed hardware revision, Coder range and coating construction.
Corrosive-environment programs
Revision H and later units provide polyacrylate coating on covered areas for moderate corrosive exposure.
Read the applicable WOODWARD instructions before work. Verify 5466-1035 and the installed system configuration before isolation or replacement.
1
Record the complete 5466-1035 marking, revision and Coder version before work.
2
Place the MicroNet control and affected process in the approved safe maintenance state.
3
Back up the installed application and record rack, network and CAN assignments.
4
Verify that the replacement revision and conformal-coating construction are approved.
5
Inspect connectors and uncoated jumpers because conformal coating does not protect them.
6
Install the module only in the documented slot with the approved power removed.
7
Restore the application and confirm communication, diagnostics and commanded states.
8
Document the final revision, configuration and functional acceptance results before release.
Technical notes
Woodward identifies 5466-1035 as a non-preferred CPU5200 module intended for supported spares and repairs rather than new-system design. Revision H and later use a polyacrylate conformal coating, while revision G uses silicone coating and cannot be converted to the newer coating. Commissioning must retain the approved MicroNet application, rack assignment and network configuration.
FAQ View All FAQ
-
What is the WOODWARD 5466-1035?The WOODWARD 5466-1035 is a MicroNet CPU5200 module identified with Usage Plus hardware and Coder versions 4.06 through 5.04.
-
Which processor and memory resources does 5466-1035 use?The 5466-1035 uses a 400 MHz PowerPC 5200 processor with 64 MB of flash memory and 128 MB of RAM.
-
Does the MicroNet 5466-1035 support CAN communication?The MicroNet 5466-1035 provides dual CAN communication capability.
-
How does Woodward classify part 5466-1035 today?Woodward classifies part 5466-1035 as non-preferred, meaning it is supported for existing-system spares and repairs but is not recommended for new systems.
-
What coating is used on revision H and later 5466-1035 modules?Revision H and later 5466-1035 modules use a polyacrylate conformal coating on covered areas.
-
Can a revision G 5466-1035 be converted to polyacrylate coating?Woodward states that a revision G 5466-1035 with silicone coating cannot be converted to the polyacrylate construction.
-
Which return part is associated with 5466-1035?Woodward lists 5466-1036 as the return part associated with 5466-1035.
-
What must be verified before replacing 5466-1035?The technician must verify the exact part number, revision, Coder version, rack position, application and communication configuration before replacing 5466-1035.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.