Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05
-
Manufacturer:Vibro-Meter
-
Product Category:General Automation
-
Spare Part Number:TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05
-
Estimated shipping dimensions:22x26x2cm
-
Weight:0.15 kg
-
Tariff Code:8537101190
-
Counliy of origin:Switzerland
-
Product line:Vibro-Meter TQ902 standard-mount proximity sensor
-
Measurement principle:Non-contact eddy-current displacement sensing
-
Environment option A1:Standard environment
-
Body thread option B1:M10 × 1
-
Body length option C40:40 mm
-
Unthreaded length option D2:2 mm
-
Integral cable option E5000:5000 mm ±500 mm
-
Protection option F0:No flexible hose and no IP172 connector protector
-
Flexible-hose option G0:None
-
Total system length option H05:5 m
-
Supported linear measurement ranges:2 mm or 4 mm with the configured IQS900
-
Frequency response:DC to 20 kHz (−3 dB)
-
Sensor operating temperature:−40 to +180 °C
-
Sensor head protection:IP68 according to IEC 60529
-
Sensor construction:PPS tip and AISI 316L stainless-steel body
-
Connector:Self-locking miniature coaxial cable plug
Information
Overview
Manuals
Common Applications
Product Precautions
This TQ902-011 version combines a compact M10 × 1 sensing body with an unprotected 5 m integral coaxial cable for a documented 5 m measurement chain.
- M10 × 1 standard-mount sensor body
- 40 mm body with 2 mm unthreaded section
- 5 m integral FEP coaxial cable
- No flexible hose or IP172 connector protection
The sensor operates on the eddy-current principle and converts target-gap changes into an electrical response for the matching IQS900. Its PPS tip and AISI 316L stainless-steel body support severe industrial sensor locations, while the IP68-rated head protects the sensing assembly. Because the E5000 cable already equals the H05 total-system length, preserve the direct sensor-to-conditioner cable route and avoid adding an unrecorded extension cable.
Important Notice: Verify the complete TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05 identity, 5 m route and matched IQS900 configuration before work.
Vibro-Meter TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05 Manuals & Downloads
Vibro-Meter TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05 Official Technical Reference Excerpt (PDF)Vibro-Meter TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05 Installation & Commissioning Guide (PDF)The first document contains the applicable manufacturer reference pages; the second organizes preparation, mounting, cable handling, diagnostics and handover checks.
Steam and gas turbine monitoring
Measures non-contact shaft vibration or axial position through a documented 5 m front end.
Hydraulic turbine supervision
Supports calibrated gap measurements at approved metallic targets and bearing locations.
Compressor and pump protection
Feeds the associated IQS900 channel used for machinery-protection and condition-monitoring decisions.
Direct 5 m sensor routes
Fits installations where the integral cable reaches the conditioner without an EA902 extension cable.
Read the applicable Vibro-Meter instructions before work. Verify TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05 and the installed system configuration before isolation or replacement.
1
Record the complete TQ902-011 order string, mounting point and conditioner assignment.
2
Place the monitored machine and affected protection channels in the approved maintenance state.
3
Confirm the M10 × 1 thread, 40 mm body and 2 mm unthreaded length before installation.
4
Prevent impact to the PPS sensor tip and establish the documented initial gap.
5
Support the unprotected 5 m FEP coaxial cable and maintain the approved bend radius.
6
Clean, inspect and insulate the miniature coaxial connector before reconnection.
7
Do not insert an unrecorded EA902 cable because E5000 already provides the H05 chain length.
8
Validate gap output, vibration response, diagnostics and all affected monitoring functions before release.
Technical notes
This ordered TQ902-011 uses its 5 m integral cable as the complete 5 m chain length. The cable is supplied without a flexible hose or IP172 protector, so routing, support and connector protection must follow the approved installation design.
FAQ View All FAQ
-
What does Vibro-Meter TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05 do?This exact TQ902-011 acts as the standard-mount non-contact sensor in a 5 m eddy-current proximity measurement chain.
-
Which mounting geometry belongs to TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05?The sensor combines an M10 × 1 body thread, a 40 mm body length and a 2 mm unthreaded section.
-
How long is the integral cable on TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05?E5000 specifies a 5000 mm integral FEP coaxial cable with a published tolerance of ±500 mm.
-
Does TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05 include a protective hose?No; F0 and G0 specify that the integral cable has neither a flexible hose nor an IP172 connector protector.
-
Why is an EA902 extension cable unnecessary for this TQ902-011 configuration?The 5 m E5000 integral cable already supplies the complete H05 total-system length.
-
What materials are used in the TQ902-011 sensor head?The active coil is moulded in a PPS tip that is crimped to an AISI 316L stainless-steel body.
-
Which measurement performance is available from a matched TQ902-011 chain?The configured chain supports a 2 mm or 4 mm linear range with a DC to 20 kHz frequency response.
-
What should be tested after installing TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05?Acceptance should confirm identity, initial gap, cable integrity, connector seating, conditioner setup, diagnostics and all affected vibration or position channels.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.