Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for A5E36228241
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for A5E36228241
-
Manufacturer:Siemens
-
Product Category:General Automation
-
Spare Part Number:A5E36228241
-
Estimated shipping dimensions:43.5x15x3.5cm
-
Weight:2.05 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Component type:Inverter power board
-
Drive family:SINAMICS G120L
-
Power-module family:PM330L
-
Installation basis:Documented installed power-module execution
-
Commissioning basis:Approved drive parameter and diagnostic record
Information
Overview
Manuals
Common Applications
Product Precautions
A5E36228241 is controlled as the inverter power-board identity inside its installed SINAMICS G120L PM330L assembly.
- Keeps the exact A5E36228241 board identity
- Belongs to the documented G120L inverter power path
- Requires matching to the installed PM330L execution
- Supports controlled diagnostic and motor-function verification
The board is not selected independently from its host power module. Service work follows the PM330L hardware manual and the as-installed unit record for isolation, cabinet access, connection restoration and recommissioning.
Important Notice: Confirm A5E36228241, the complete G120L PM330L host, hardware version, connectors, DC-link isolation, protective bonding, cooling, firmware, parameter set and controlled test results before commissioning.
Apter Power A5E36228241 Manuals and Guides
The first document is the model-specific technical and system reference. The second is a distinct field workbook for installation, wiring, commissioning and acceptance records.
G120L power-module service
Restores the documented inverter-board position in a PM330L assembly.
Drive cabinet refurbishment
Preserves the approved cooling, grounding and internal connection arrangement.
Inverter fault recovery
Supports board-level service after the host power module is correctly identified.
Controlled drive recommissioning
Combines parameter comparison, diagnostics and staged motor testing.
Read the applicable Siemens installation instructions before work. Verify A5E36228241, the installed host system and all configured field interfaces before isolation, wiring or commissioning.
1
Confirm A5E36228241 and the complete installed G120L PM330L power-module record.
2
Place the drive, motor and process in the approved maintenance state.
3
Isolate incoming power and prove the DC link and stored energy discharged.
4
Record board position, control connectors, power interfaces, grounding and cooling hardware.
5
Use ESD controls and preserve creepage distances, bonding and airflow paths.
6
Install only in the documented PM330L execution and restore the approved parameter set.
7
Review power-module, inverter, communication and temperature diagnostics after energization.
8
Complete controlled direction, feedback, current and motor-function tests before release.
Technical notes
Record the complete G120L power-module type, board position, control connections, power interfaces and cooling arrangement before removing A5E36228241. Restore only the documented hardware execution, then compare parameters and diagnostics and complete controlled motor tests.
FAQ View All FAQ
-
How should the complete A5E36228241 identity be verified before replacement?Confirm A5E36228241 and the complete installed G120L PM330L power-module record.
-
Which Siemens drive family must be checked before installing A5E36228241?The board is not selected independently from its host power module. Service work follows the PM330L hardware manual and the as-installed unit record for isolation, cabinet access, connection restoration and recommissioning.
-
What isolation sequence applies before disconnecting A5E36228241?Place the drive, motor and process in the approved maintenance state. Isolate incoming power and prove the DC link and stored energy discharged.
-
Which connections should be recorded before removing A5E36228241?Record board position, control connectors, power interfaces, grounding and cooling hardware.
-
How should ESD, grounding and cooling be controlled when handling A5E36228241?Use ESD controls and preserve creepage distances, bonding and airflow paths.
-
How is the approved configuration restored after fitting A5E36228241?Install only in the documented PM330L execution and restore the approved parameter set.
-
Which diagnostics should be reviewed during A5E36228241 recommissioning?Review power-module, inverter, communication and temperature diagnostics after energization.
-
What acceptance test is required before A5E36228241 returns to service?Complete controlled direction, feedback, current and motor-function tests before release.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.