The Siemens 6ES7414-3EM07-0AB0 is a SIMATIC S7-400 CPU 414-3 PN/DP with 4 MB work memory, split equally between code and data, plus MPI/DP, Ethernet PROFINET, and an optional IF 964-DP interface position.
- CPU 414-3 PN/DP
- V7.0
- 4 MB: 2 MB code and 2 MB data
- MPI/PROFIBUS DP, 12 Mbit/s
It executes the control program, manages S7-400 rack modules, and exchanges cyclic process data and diagnostics across configured PROFINET and PROFIBUS networks; the third PROFIBUS interface requires the specified plug-in IF 964-DP module.
Important Notice: Use the complete 6ES7414-3EM07-0AB0 code and verify the physical nameplate, project, accessories, and current Siemens documentation before installation or replacement.
Apter Power 6ES7414-3EM07-0AB0 Manuals and Guides
Important Notice: These are two separate Apter Power documents prepared from the manufacturer-published Siemens information named in each document. Confirm the physical nameplate, current Siemens documents, and host-system requirements before installation or replacement.
Networked S7-400 control
Combines central logic with PROFINET and PROFIBUS communication
Large machine automation
Uses 4 MB work memory for complex sequence and data processing
Distributed I/O systems
Coordinates PN and DP field stations from one controller
Multi-interface production cells
Adds an optional second DP channel through IF 964-DP
Read and follow the exact Siemens documentation and host-equipment instructions before use. Verify 6ES7414-3EM07-0AB0 from the physical nameplate.
1
Firmware/project: Match the V7.0 hardware catalog entry and approved STEP 7 project
2
PROFINET: Verify device names, IP plan, topology, update times, and switch configuration
3
PROFIBUS: Confirm station roles, addresses, cable, termination, and baud rate
4
Optional interface: Install only the Siemens-specified IF 964-DP when the third interface is configured
5
Commissioning: Validate each network and central rack diagnostics before production release
Videos
News
Applications
