Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for TI-405-8ADC
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for TI-405-8ADC
-
Manufacturer:Siemens
-
Product Category:PLC Systems
-
Spare Part Number:405-8ADC
-
Estimated shipping dimensions:10.2x5.1x15.2cm
-
Weight:0.3 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Input channels:8
-
Resolution:12 bit
-
Current ranges:0 to 20 mA; 4 to 20 mA
-
Voltage ranges:0 to 5 V; 1 to 5 V; 0 to 10 V; ±5 V; ±10 V
-
User supply:24 V DC
-
Configuration basis:Preserve assigned settings
-
Acceptance focus:Confirm end-to-end response
Information
Overview
Manuals
Common Applications
Product Precautions
Siemens TI-405-8ADC performs the eight-channel analog input module function within the SIMATIC TI 405 platform while retaining the interfaces assigned to its installed position.
- Provides the eight-channel analog input module function.
- Integrates with the SIMATIC TI 405 platform.
- Retains the assigned signal or communication path.
- Uses the complete TI-405-8ADC identity for replacement control.
The eight-channel analog input module should remain matched to its installed terminals, configuration and receiving system. Verify the complete path after replacement.
Important Notice: Match Siemens TI-405-8ADC to the installed position, terminals and controlled configuration. Verify the complete signal or communication path before release.
Siemens TI-405-8ADC Manuals & Downloads
Siemens TI-405-8ADC Technical Reference (PDF)Siemens TI-405-8ADC Installation & Commissioning Guide (PDF)The first PDF covers the product function and technical data. The second covers connection checks, commissioning and release steps.
Installed-base maintenance
Restore the assigned eight-channel analog input module position without changing the surrounding system design.
Loop and channel service
Retain terminal assignments, scaling and channel ownership during controlled replacement.
Fault isolation
Separate module, field wiring and configuration causes during troubleshooting.
Commissioning
Prove the complete signal path before returning the process to service.
Apply these checks to the exact Siemens TI-405-8ADC position before isolation, replacement or release.
1
Confirm the complete Siemens TI-405-8ADC marking before removal.
2
Place the affected SIMATIC TI 405 function in its approved maintenance state.
3
Record terminals, connectors and installed orientation before disconnection.
4
Retain channel assignments, scaling and communication settings.
5
Inspect mating contacts and terminal hardware for damage or contamination.
6
Restore shields, commons and protective grounding exactly as assigned.
7
Energize under controlled conditions and review module status.
8
Verify the end-to-end process response before release.
Technical notes
Match Siemens TI-405-8ADC to the installed position, terminals and controlled configuration. Verify the complete signal or communication path before release.
FAQ View All FAQ
-
Which control family uses Siemens TI-405-8ADC?Siemens TI-405-8ADC belongs to the SIMATIC TI 405 platform.
-
What function does Siemens TI-405-8ADC perform?It performs the eight-channel analog input module function.
-
Which resolution applies to Siemens TI-405-8ADC?Resolution: 12 bit.
-
How does Siemens TI-405-8ADC use its current ranges?Current ranges: 0 to 20 mA; 4 to 20 mA.
-
Why must the voltage ranges be checked on Siemens TI-405-8ADC?The applicable value is 0 to 5 V; 1 to 5 V; 0 to 10 V; ±5 V; ±10 V and it must match the installed position.
-
Which user supply should be retained for Siemens TI-405-8ADC?Retain 24 V DC.
-
What commissioning result is required for Siemens TI-405-8ADC?Confirm the complete eight-channel analog input module path from its field interface through the assigned system function.
-
How should Siemens TI-405-8ADC be identified before replacement?Match the full TI-405-8ADC marking and all installed interfaces before removal.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.