With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 6ES7241-1CH30-1XB0 mounts directly onto the PLC front for efficient RS485 serial communication over distances up to 1000 meters. It operates with a low 5V DC power consumption of 1.5W, supports horizontal or vertical mounting within an IP20-rated enclosure, and functions in industrial temperatures from -20°C to 60°C.
Zero-Space Cost-Saving Form Factor
Comprehensive Protocol Coverage
Cost-Effective Point-to-Point Solution
This compact communication board inserts directly into the dedicated signal board slot on the front of any SIMATIC S7-1200 CPU, ensuring zero additional space is consumed on the DIN rail. For physical field wiring, it features a removable terminal block that provides straightforward point-to-point connections, accommodating cable cross-sections from 0.14 to 0.5 square millimeters. The module relies on differential signaling over a shielded twisted-pair cable to successfully mitigate industrial electrical noise and common-mode voltage fluctuations across the network. It handles adjustable data transmission baud rates ranging from 300 to 115,200 bits per second, utilizing 7 or 8 data bits, odd, even, or no parity bit selection, and 1 or 2 stop bits to adapt to diverse field device configurations.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Siemens 6ES7241-1CH30-1XB0 Communication Board Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
HVAC & Smart Buildings
Connects and controls multiple chillers, temperature/humidity sensors, and damper actuators via Modbus RTU for centralized climate monitoring and constant temperature control.
Water & Wastewater Treatment
Reads serial data from field-distributed ultrasonic level meters, electromagnetic flowmeters, and water quality analyzers (pH, turbidity) while dispatching speed commands to chemical dosing pump drives.
Automotive Manufacturing
Connects to digital torque-wrenches at assembly stations, automatically acquiring final fastening torque metrics for trace-and-track quality databases.
Solar Power & Renewable Energy
Installed inside PV combiner boxes or inverter enclosures to poll active power output, DC voltage, and fault diagnostic records from multiple solar inverters via RS485.
Cement & Building Materials
Links to belt weigh-feeders and high-temperature flue gas analyzers to capture real-time raw material weights and adjust classifier motor speeds.
When using the 6ES7241-1CH30-1XB0, the board must be inserted or removed only when the CPU power is completely off to prevent hardware damage. Note that its RS485 interface lacks electrical isolation, making an external isolator mandatory for long-distance runs or environments with potential differences. Field wiring requires shielded twisted-pair cables with 120-ohm terminating resistors configured at both ends of the bus to suppress signal reflections, while serial parameters such as baud rate and parity bits in TIA Portal must precisely match the slave devices.
The Siemens 6ES7241-1CH30-1XB0 operates as a compact CB 1241 RS485 point-to-point communication board within the SIMATIC S7-1200 controller family. This specific component features an embedded form factor that snaps directly into the dedicated signal board slot on the front of any S7-1200 CPU, ensuring that industrial serial capabilities are expanded without widening the control panel layout or taking up left-side system rail space. For physical layer connections, it provides a removable 5-pin terminal block supporting half-duplex asynchronous data transmission across adaptive baud rates ranging from 300 bps to 115.2 Kbps. On the software side through TIA Portal, it acts as a versatile serial interface handling Freeport, Modbus RTU master or slave protocols, and the USS drive interface protocol to bridge communications with motor drives and field process meters over distances reaching up to 1000 meters. The board operates under a minimal energy footprint by drawing only 50 mA of current from the 5 Vdc backplane line, resulting in a typical power loss of 1.5 W while maintaining strict operational resilience under standard plant temperatures.
It is an industrial-grade serial communication board belonging to the Siemens S7-1200 PLC system used to achieve RS485 point-to-point serial data exchange.
How to correctly install and use the 6ES7241-1CH30-1XB0 communication board in an industrial field?
Snap it directly into the integrated expansion slot located on the front center of the S7-1200 CPU under power-off conditions without occupying extra side module space.
What is the interface type on the physical hardware of 6ES7241-1CH30-1XB0?
This module does not use a standard DB9 plug but instead provides a practical 5-pin removable terminal block as its physical wiring interface.
What are the core industrial application scenarios for 6ES7241-1CH30-1XB0?
It is primarily applied at the field control level to achieve short-distance serial networking between the PLC and variable frequency drives, temperature controllers, and other third-party smart instruments.
Which common serial communication protocols are supported by 6ES7241-1CH30-1XB0 at the software level?
This expansion hardware supports Freeport protocol, Modbus RTU master or slave configurations, and the USS drive control protocol through backplane instructions.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
