Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6GK1905-0AE00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6GK1905-0AE00
-
Manufacturer:Siemens
-
Product Category:General Automation
-
Spare Part Number:6GK1905-0AE00
-
Estimated shipping dimensions:10.5x3.5x2.5cm
-
Weight:0.06 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Product type:SpliTConnect Terminator (non-Ex)
-
Network:PROFIBUS PA
-
Transfer rate:31.25 kbit/s
-
Segment role:Electrical bus termination
-
Hazardous-area use:Not permitted
-
Protection degree:IP67
-
Operating temperature:-40 to +85 C
-
Silicon-free:Yes
-
Packaging:5 units per pack
-
Acceptance:Endpoint placement and segment communication
Information
Overview
Manuals
Common Applications
Product Precautions
At the physical end of a PROFIBUS PA segment, Siemens 6GK1905-0AE00 closes the bus so that only the two intended endpoints remain terminated.
- Terminates a PROFIBUS PA segment electrically.
- Supports the documented 31.25 kbit/s transfer rate.
- Uses an IP67 non-Ex enclosure execution.
- Operates within the documented -40 to +85 C range.
Place this SpliTConnect component only at the recorded segment endpoint. Correct termination, sealed assembly and successful PA communication must be confirmed together.
Important Notice: 6GK1905-0AE00 is the non-Ex version and must not be installed where hazardous-area approval is required.
Siemens 6GK1905-0AE00 Manuals & Downloads
Siemens 6GK1905-0AE00 Official Technical Reference Excerpt (PDF)Siemens 6GK1905-0AE00 Installation & Commissioning Guide (PDF)
The official excerpt records the non-Ex SpliTConnect limits; the installation guide focuses on endpoint placement, sealing, temperature checks and PROFIBUS PA communication.
PROFIBUS PA endpoint
Provides the required electrical termination at one documented end of a PA segment.
SpliTConnect maintenance
Replaces an exact non-Ex terminator without altering the established segment topology.
IP67 field assembly
Supports a sealed installation when mating parts and cable entries are correctly restored.
Segment fault isolation
Helps verify whether missing or duplicate termination is disturbing 31.25 kbit/s communication.
Use 6GK1905-0AE00 only as the non-Ex endpoint terminator defined for the installed PROFIBUS PA segment. Confirm topology before opening the assembly.
1
Verify the exact 6GK1905-0AE00 non-Ex marking.
2
Do not use this execution in a hazardous-area application.
3
Identify both intended segment endpoints before replacement.
4
Isolate the PA segment according to the site procedure.
5
Keep sealing faces and cable entries clean and undamaged.
6
Confirm the site remains within the -40 to +85 C limit.
7
Do not leave an extra terminator connected on the segment.
8
Verify stable 31.25 kbit/s communication after sealing.
Technical notes
Match Siemens 6GK1905-0AE00 to the complete installed record, host position and companion hardware. Preserve connections and settings; then verify diagnostics and non-Ex termination of a PROFIBUS PA SpliTConnect segment under controlled conditions.
FAQ View All FAQ
-
What does 6GK1905-0AE00 identify?6GK1905-0AE00 identifies the splitconnect non-ex terminator used for non-Ex termination of a PROFIBUS PA SpliTConnect segment.
-
Which installed system must 6GK1905-0AE00 match?Match 6GK1905-0AE00 to the recorded PROFIBUS PA SpliTConnect host, position and companion hardware.
-
Which markings must be checked on 6GK1905-0AE00?Verify the complete 6GK1905-0AE00 text and every suffix, revision or assembly marking on the supplied item.
-
What should be recorded before removing 6GK1905-0AE00?Record the slot, connectors, cable labels, switches, parameters, adjacent hardware and diagnostic state.
-
Can 6GK1905-0AE00 be replaced by appearance alone?No. 6GK1905-0AE00 requires an exact identity and interface match against the installed-system record.
-
How should 6GK1905-0AE00 be isolated?Use the approved maintenance state, remove connected energy and prove the affected circuit safe.
-
What is checked after installing 6GK1905-0AE00?Check mechanical seating, wiring, settings, communication, diagnostics and every affected function.
-
What releases 6GK1905-0AE00 to service?A recorded acceptance test must confirm non-Ex termination of a PROFIBUS PA SpliTConnect segment without unexpected alarms or process response.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.