Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6SL3351-6FE33-1AA1
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6SL3351-6FE33-1AA1
-
Manufacturer:Siemens
-
Product Category:General Automation
-
Spare Part Number:6SL3351-6FE33-1AA1
-
Estimated shipping dimensions:37.4x27x9.5cm
-
Weight:3.1 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Module type:Control Interface Board
-
Drive family:MICROMASTER 430
-
Frame size:GX
-
Rated current class:310 A
-
Supply class:3 AC 380 to 480 V, 50/60 Hz
Information
Overview
Manuals
Common Applications
Product Precautions
6SL3351-6FE33-1AA1 provides the documented replacement control-interface board for the documented MICROMASTER 430 power section for a matched MICROMASTER 430 frame-size GX drive installation.
- Provides the documented replacement control-interface board for the documented MICROMASTER 430 power section
- Uses exact article identity 6SL3351-6FE33-1AA1 for replacement control
- Integrates with the matched MICROMASTER 430 frame-size GX drive hardware
- Supports controlled diagnostics and functional verification after installation
The component is used with the exact host, connectors, power interfaces and configuration identified for 6SL3351-6FE33-1AA1. Commissioning preserves the installed architecture and verifies controlled drive response.
Important Notice: Confirm 6SL3351-6FE33-1AA1, MICROMASTER 430 frame-size GX drive host, hardware revision, connectors and terminals, power class, feedback or fieldbus options, grounding, cooling, firmware or parameter set, accessories and controlled commissioning results before service release.
Apter Power 6SL3351-6FE33-1AA1 Manuals and Guides
- Apter Power 6SL3351-6FE33-1AA1 MICROMASTER 430 Control Interface Board Technical Reference PDF
- Apter Power 6SL3351-6FE33-1AA1 Installation, Connection and Verification Workbook PDF
The first document is the model-specific technical and system reference. The second is a distinct field workbook for installation, wiring, commissioning and acceptance records.
MICROMASTER 430 frame-size GX drive planned maintenance
Restores the documented replacement control-interface board for the documented MICROMASTER 430 power section during a controlled cabinet service.
MICROMASTER 430 Control Interface Board replacement
Uses the exact 6SL3351-6FE33-1AA1 identity to avoid an adjacent hardware execution.
Drive-system refurbishment
Preserves the recorded power, control, communication and protective-earth arrangement.
Controlled recommissioning
Confirms diagnostics and the affected drive function before automatic operation.
Read the applicable Siemens installation instructions before work. Verify 6SL3351-6FE33-1AA1, the installed host system and all configured field interfaces before isolation, wiring or commissioning.
1
Confirm the complete 6SL3351-6FE33-1AA1 marking and the installed MICROMASTER 430 frame-size GX drive position.
2
Place the driven machine and associated process in the approved maintenance state.
3
Isolate incoming power, prove stored DC-link energy discharged and use ESD controls.
4
Record every power, control, feedback, communication and protective-earth connection before removal.
5
Verify the installed host hardware and all values documented for 6SL3351-6FE33-1AA1 against the official source.
6
Restore the approved hardware execution, connector arrangement and project or parameter record.
7
Energize in the prescribed sequence and review drive, board and communication diagnostics.
8
Complete a controlled no-load or safe-point functional test before returning the machine to service.
Technical notes
Install 6SL3351-6FE33-1AA1 only in the documented MICROMASTER 430 frame-size GX drive position. Preserve the as-found wiring, hardware revision and configuration, then verify diagnostics and the affected replacement control-interface board for the documented MICROMASTER 430 power section under controlled conditions.
FAQ View All FAQ
-
How is 6SL3351-6FE33-1AA1 identified?Match the complete article number, MICROMASTER 430 Control Interface Board designation and Control Interface Board.
-
Which host is required for 6SL3351-6FE33-1AA1?Use only the documented MICROMASTER 430 frame-size GX drive execution with matching interfaces.
-
What records are retained before removing 6SL3351-6FE33-1AA1?Record power, control, feedback, communication and PE connections.
-
How is 6SL3351-6FE33-1AA1 isolated safely?Secure the machine, isolate supplies, prove the DC link discharged and use ESD controls.
-
Which official values govern 6SL3351-6FE33-1AA1?Module type: Control Interface Board; Drive family: MICROMASTER 430; Frame size: GX; Rated current class: 310 A.
-
How is 6SL3351-6FE33-1AA1 configuration restored?Restore the approved hardware execution, connectors and parameter or project record.
-
Which diagnostics follow 6SL3351-6FE33-1AA1 energization?Review drive, board and communication diagnostics in the prescribed startup sequence.
-
What releases 6SL3351-6FE33-1AA1 to service?A controlled safe-point functional test with the expected drive response.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.