Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 170XTS02100
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 170XTS02100
-
Manufacturer:Schneider Electric
-
Product Category:PLC Systems
-
Spare Part Number:170XTS02100
-
Estimated shipping dimensions:2.8x2.2x1.2cm
-
Weight:0.1 kg
-
Tariff Code:8537101190
-
Counliy of origin:France
-
Accessory type:Line terminator
-
Network:Modbus Plus
-
Connector form:RJ45 terminator
-
Compatible junction:170XTS02000
-
Destination:IP20 T-junction
-
Ingress protection:IP20
-
Compatible platform:Modicon Momentum
-
Additional platforms:Modicon Quantum and Premium
-
Installation position:Documented segment end
-
Selection boundary:Not a connecting cable
Information
Overview
Manuals
Common Applications
Product Precautions
Schneider Electric 170XTS02100 terminates the documented end of a Modbus Plus segment at an IP20 T-junction.
- Install only at the documented Modbus Plus line end.
- Pair it with the 170XTS02000 IP20 T-junction.
- Keep the RJ45 contact clean and fully seated.
- Do not confuse the terminator with a network cable plug.
The terminator establishes the electrical end condition for the Modbus Plus physical layer. A missing, duplicated or misplaced terminator can prevent stable communication across the segment.
Important Notice: Install 170XTS02100 only at the documented segment end; an extra or misplaced terminator can disrupt the entire Modbus Plus network.
Schneider Electric 170XTS02100 Manuals & Downloads
Schneider Electric 170XTS02100 Technical Reference (PDF)Schneider Electric 170XTS02100 Official Manual Excerpt (PDF)The technical reference presents exact-model engineering data and maintenance boundaries. The official excerpt contains selected unchanged Schneider Electric source pages for this exact model or its documented product family.
Segment-end termination
Terminates an approved Modbus Plus cable run.
IP20 junction service
Fits the supported 170XTS02000 junction.
Network fault recovery
Restores a missing or damaged exact terminator.
Legacy topology maintenance
Preserves line-end placement across supported Modicon ranges.
Schneider Electric 170XTS02100 installation checks: verify exact identity, retain configuration evidence and record the complete functional acceptance.
1
Verify the complete Schneider Electric 170XTS02100 marking before any selection or field work.
2
Record the installed position, connectors, conductors and configuration assigned to 170XTS02100.
3
Place the connected equipment in its approved safe state and isolate all relevant energy sources.
4
Protect the line terminator and its mating interfaces from contamination, static discharge and mechanical damage.
5
Trace the network and confirm the true segment end.
6
Remove network power or follow the approved communication-maintenance procedure.
7
Inspect RJ45 contacts and the junction socket.
8
Verify all Modbus Plus nodes remain stable after installation.
Technical notes
Install 170XTS02100 only at the documented segment end; an extra or misplaced terminator can disrupt the entire Modbus Plus network.
FAQ View All FAQ
-
What device identity or role does Schneider Electric 170XTS02100 publish?Record Line terminator for 170XTS02100 and verify the field arrangement against the controlled drawing or project.
-
How does Schneider Electric define the network of 170XTS02100?The exact-model source gives Modbus Plus. Use it together with the actual 170XTS02100 nameplate and installation record.
-
Which connector form configuration belongs to Schneider Electric 170XTS02100?170XTS02100 is documented with RJ45 terminator; this value belongs to the verified product configuration.
-
Which compatible junction is associated with Schneider Electric 170XTS02100?Use 170XTS02000 as the 170XTS02100 compatible junction reference and resolve any field discrepancy before release.
-
Which destination must be retained for Schneider Electric 170XTS02100?The manufacturer record for 170XTS02100 specifies IP20 T-junction. Preserve it through selection, installation and acceptance.
-
What ingress protection behavior is documented for Schneider Electric 170XTS02100?Schneider Electric identifies the ingress protection as IP20; keep that exact entry in the 170XTS02100 record.
-
Which compatible platform is associated with Schneider Electric 170XTS02100?The published 170XTS02100 value is Modicon Momentum. The installed configuration must remain within that boundary.
-
Which additional platforms is associated with Schneider Electric 170XTS02100?For 170XTS02100, the manufacturer states Modicon Quantum and Premium. Do not replace it with a nearby suffix value.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.