Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for AD916AE FBM203
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for AD916AE FBM203
-
Manufacturer:Invensys
-
Product Category:DCS Systems
-
Spare Part Number:AD916AE FBM203
-
Estimated shipping dimensions:10.2×4.5×10.4 cm
-
Weight:0.28 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
RTD channels:8 isolated RTD inputs
-
Wiring:2-wire or 3-wire RTD sensors
-
FBM203 range:0 to 320 ohms
-
Conversion:Resistance input converted for Foxboro DCS processing
-
Fieldbus:Redundant 2 Mbps module fieldbus
Information
Overview
Manuals
Common Applications
Product Precautions
Foxboro AD916AE FBM203 forms the integrated field-wiring interface for the FBM203 resistance-temperature input subsystem used with platinum, nickel and copper RTD measurements.
- Provides eight isolated temperature channels for the documented integrated rtd termination function.
- Handles platinum, nickel or copper RTD input through the specified Foxboro FBM module-fieldbus path.
- Works with FBM203 RTD input path and the installed field-termination connection.
- Each channel accepts the documented RTD wiring arrangement for the FBM203 execution.
The integrated rtd termination belongs in the controlled Foxboro FBM module-fieldbus path and works with FBM203 RTD input path and the installed field-termination connection. Its field connection, companion hardware and project configuration must be reviewed together before the channel is returned to service.
Important Notice: Use AD916AE FBM203 only with FBM203 RTD input path and the installed field-termination connection; verify the field interface and controlled configuration before energizing the subsystem.
Foxboro AD916AE FBM203 Manuals & Downloads
Foxboro AD916AE FBM203 Official Technical Reference Excerpt (PDF)Foxboro AD916AE FBM203 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Installed-base maintenance
Restores the documented integrated rtd termination position without changing the approved system architecture.
Loop or channel service
Supports verification of platinum, nickel or copper RTD input at the assigned control-system channel.
Planned replacement
Provides an exact-identity replacement path when FBM203 RTD input path and the installed field-termination connection and the field interface have been confirmed.
Commissioning support
Allows the responsible engineer to prove wiring, configuration, status and response for eight isolated temperature channels.
Before installing Foxboro AD916AE FBM203, confirm the documented system, interfaces and controlled configuration.
1
Match the complete AD916AE FBM203 marking to the work order and installed position before removal.
2
Confirm FBM203 RTD input path and the installed field-termination connection before making or breaking any field connection.
3
Keep the assigned platinum, nickel or copper RTD input within the documented subsystem and range.
4
Record terminal designations, polarity, common and shield treatment before disconnecting conductors.
5
Inspect module seating, connector keying, terminal condition and strain relief before power is restored.
6
Restore the controlled channel configuration, range selection and alarm or timeout behavior after installation.
7
Check local indicators and controller diagnostics for internal, communication or channel faults during commissioning.
8
Prove the intended response across eight isolated temperature channels and record the acceptance result before release.
Technical notes
Use AD916AE FBM203 only with FBM203 RTD input path and the installed field-termination connection; verify the field interface and controlled configuration before energizing the subsystem.
FAQ View All FAQ
-
What sensor families can Foxboro AD916AE FBM203 measure?The FBM203 subsystem is intended for platinum, nickel and copper resistance-temperature detectors.
-
Does Foxboro AD916AE FBM203 support both two-wire and three-wire RTDs?Yes. Its eight isolated inputs support the documented two-wire or three-wire RTD connections.
-
What resistance span is associated with Foxboro AD916AE FBM203?The documented FBM203 measurement range is 0 to 320 ohms.
-
How many temperature inputs are independently isolated on Foxboro AD916AE FBM203?All eight RTD input channels are isolated for individual field-sensor measurement.
-
How are resistance readings from Foxboro AD916AE FBM203 delivered to the control system?The module converts each resistance input for Foxboro DCS processing and sends the values over its redundant module fieldbus.
-
What must be configured before connecting a different RTD material to Foxboro AD916AE FBM203?The channel must be assigned to the applicable platinum, nickel or copper sensor characteristic and to the actual two-wire or three-wire arrangement.
-
Which fieldbus specification belongs to Foxboro AD916AE FBM203?The RTD input subsystem uses the redundant 2 Mbps module fieldbus.
-
How should a Foxboro AD916AE FBM203 loop be checked after rewiring?Confirm the measured resistance is within 0–320 ohms, verify the correct lead arrangement and compare the converted temperature with a known sensor condition.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.