-
Match the complete marking
Include STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000 and every visible option and revision marking on the item. Keep the exact reference on the enquiry and quotation.
-
Check the offered item before ordering
Request current label, connection and housing photos. Compare the offered transmitter with the installed process connection and approved loop design.
Technical specifications for STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000
-
Manufacturer:Honeywell
-
Product Category:General Automation
-
Spare Part Number:STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000
-
Weight:4.82 kg
-
Tariff Code:8537101190
-
Sensor principle:Piezoresistive with temperature compensation
-
Upper range limit:500 psi / 35 bar
-
Lower range limit:-14.7 psi / -1 bar
-
Minimum span:5 psi / 0.35 bar
-
Maximum turndown:100:1
-
Standard reference accuracy:±0.055% of span under stated conditions
-
Optional reference accuracy:±0.040% of span; option dependent
-
Long-term stability:0.02% URL per year for 10 years, family rating
Information
- The STG740 range extends from a lower range limit of -14.7 psi to an upper range limit of 500 psi. Its minimum calibrated span is 5 psi, so the selected lower and upper range values must be reviewed against the process envelope and protective overpressure design.
Range planning: STG740 limits and configured span
Integration: Protocol and mechanical options verified on unit
SmartLine STG700 devices can be ordered with different communication, display, process-connection and approval selections. The long order code alone is not decoded here; the fitted protocol and wetted-material configuration must be read from the actual nameplate and Honeywell order record.
A replacement must preserve the original pressure range, calibrated units, damping, output behavior and mounting arrangement. After installation, verify the impulse line, zero reference and control-system reading under the approved loop procedure.
-
Honeywell STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000 technical reference
Apter Power technical reference - PDF, 3 pages. Product identity, engineering context and applicability conditions. -
Honeywell STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000 installation guide
Prepared by Apter Power - PDF, 3 pages. Product role, verified parameters, commissioning checks and engineering acceptance.
System compatibility: Match STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000 to the installed host input, communication execution, process connection and approved instrument configuration; the long option code must be checked against the offered unit.
Closed-loop pressure control
Supply a calibrated gauge-pressure measurement to a configured controller regulating process pressure.Local process indication
Present the measured gauge pressure to operators through the installed indication and control arrangement.Alarm and trend monitoring
Feed configured pressure alarms and historical trends through the selected transmitter output and host input.Experion PKS integration
Use the transmitter with Experion PKS when the delivered communication execution matches the installed input interface and loop design.
Compare the fitted meter body and connection orientation with the piping design.
Preserve lower and upper range values, units and damping.
Read the actual transmitter label before assigning HART or DE wiring.
Apply isolation, draining and pressure restoration procedures.
Use the protocol-specific supply and load requirements.
Compare local pressure indication and host input at controlled points.
Alternative Names
Technical notes
Range selection: Select calibration limits within the STG740 rated range and at or above the minimum span.
Output interface: Confirm the actual HART or DE execution before assigning power and communication.
Loop verification: Document the process connection and multi-point loop acceptance test.
FAQ View All FAQ
-
How should the calibrated range of STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000 be preserved?Record the installed LRV, URV, engineering unit and damping before exchange; verify them against the approved loop sheet.
-
Can the HART supply range be assumed for STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000?Only after the delivered communication option is confirmed from the nameplate and order record.
-
What pressure connection details matter for STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000?Match meter-body orientation, process thread or flange, seal material and isolation arrangement to the installed instrument.
-
How is a zero shift on STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000 investigated?Check static pressure, impulse-line condition, mounting effects and configured zero before adjusting calibration.
-
What should be checked if the host reading from STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000 is unstable?Inspect loop power and load, cable shielding, damping and process pulsation.
-
When can another STG700 device replace STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000?Only after the pressure range, wetted materials, protocol, approvals and full option code are approved.
-
How should STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000 be accepted after installation?Complete a controlled pressure or loop simulation and record readings at multiple points.
-
What evidence identifies the exact execution of STG740-STG740-E1GC4A-1-C-AHB-11S-A-50A0-0000?Use the complete nameplate and original order record to decode every installed option and certification.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.











